Skip to Content

Notice

Notice of Applications for Modification of Special Permit

Document Details

Information about this document as published in the Federal Register.

Enhanced Content

Relevant information about this document from Regulations.gov provides additional context. This information is not part of the official Federal Register document.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT.

ACTION:

List of applications for modification of special permits.

SUMMARY:

In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR part 107, subpart B), notice is hereby given that the Office of Hazardous Materials Safety has received the applications described herein. This notice is abbreviated to expedite docketing and public notice. Because the sections affected, modes of transportation, and the nature of application have been shown in earlier Federal Register publications, they are not repeated here. Requests for modification of special permits (e.g. to provide for additional hazardous materials, packaging design changes, additional mode of transportation, etc.) are described in footnotes to the application number. Application numbers with the suffix “M” denote a modification request. These applications have been separated from the new application for special permits to facilitate processing.

DATES:

Comments must be received on or before March 11, 2013.

Address Comments To: Record Center, Pipeline and Hazardous Start Printed Page 12416Materials Safety Administration, U.S. Department of Transportation, Washington, DC 20590.

Comments should refer to the application number and be submitted in triplicate. If confirmation of receipt of comments is desired, include a self-addressed stamped postcard showing the special permit number.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Copies of the applications are available for inspection in the Records Center, East Building, PHH-30, 1200 New Jersey Avenue Southeast, Washington DC or at http://regulations.gov.

This notice of receipt of applications for modification of special permit is published in accordance with Part 107 of the Federal hazardous materials transportation law (49 U.S.C. 5117(b); 49 CFR 1.53(b)).

Start Signature

Issued in Washington, DC, on February 7, 2013.

Donald Burger,

Chief, General Approval and Permits.

End Signature
Application No.Docket No.ApplicantRegulation(s) affectedNature of special permits thereof
MODIFICATION SPECIAL PERMITS
10915-MLuxfer Gas Cylinders Riverside, CA49 CFR 173.302a, 173.304a and 180.205To modify the special permit to authorize a new maximum allowable working pressure and maximum allowable strength stiffness.
12531-MWorthing Cylinder Corporation Columbus, OH49 CFR 173.302(a), 173.304(a), 173.304(d), 178.61(b), 178.61(f), 178.61(g), 178.61(i) and 178.61(k)To modify the special permit to authorize a Class 8 packaging group I material.
13336-MRenaissance Industries Sharpsville, PA49 CFR 173.302(a)(1) and 173.304To modify the special permit to authorize additional seamless stainless steel type 304 packaging and remove requirements when reoffered for transportation.
13581-MBengal Products Inc. Baton, Rouge, LA49 CFR 173.306(a)(3)To modify the special permit to reflect current statutes and regulations LA pertaining to consumer commodities.
14576-MStructural Composites Industries (SCI) Pomona, CA49 CFR 173.302a and 173.304aTo modify the special permit to authorize additional Division 2.1 and 2.2 materials and add Division 2.3 materials.
15136-MLuxfer Gas Cylinders Riverside, CA49 CFR 173.302a, 173.304a, and 180.205To modify the special permit to authorize a new maximum allowable volume and allowable contents.
End Further Info End Preamble

[FR Doc. 2013-03785 Filed 2-21-13; 8:45 am]

BILLING CODE 4909-60-M