Skip to Content

Notice

Certain Oil Country Tubular Goods From Taiwan: Affirmative Preliminary Determination of Sales at Less Than Fair Value and Postponement of Final Determination

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Enforcement and Compliance, formerly Import Administration, International Trade Administration, Department of Commerce.

SUMMARY:

The Department of Commerce (Department) preliminarily determines that certain oil country tubular goods (OCTG) from Taiwan are being, or are likely to be, sold in the United States at less than fair value (LTFV), as provided in section 733(b) of the Tariff Act of 1930, as amended (the Act). The period of investigation is July 1, 2012, through June 30, 2013. The estimated weighted-average dumping margins of sales at LTFV are shown in the “Preliminary Determination” section of this notice. Interested parties are invited to comment on this preliminary determination.

DATES:

Effective Date: February 25, 2014.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Thomas Schauer or Hermes Pinilla, AD/CVD Operations, Office I, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-0410 or (202) 482-3477, respectively.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

Scope of the Investigation

The merchandise covered by the investigation is certain oil country tubular goods (OCTG), which are hollow steel products of circular cross-section, including oil well casing and tubing, of iron (other than cast iron) or steel (both carbon and alloy), whether seamless or welded, regardless of end finish (e.g., whether or not plain end, threaded, or threaded and coupled) whether or not conforming to American Petroleum Institute (API) or non-API specifications, whether finished (including limited service OCTG products) or unfinished (including green tubes and limited service OCTG products), whether or not thread protectors are attached. The scope of the investigation also covers OCTG coupling stock.

Excluded from the scope of the investigation are: casing or tubing containing 10.5 percent or more by Start Printed Page 10496weight of chromium; drill pipe; unattached couplings; and unattached thread protectors.

The merchandise subject to the investigation is currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers: 7304.29.10.10, 7304.29.10.20, 7304.29.10.30, 7304.29.10.40, 7304.29.10.50, 7304.29.10.60, 7304.29.10.80, 7304.29.20.10, 7304.29.20.20, 7304.29.20.30, 7304.29.20.40, 7304.29.20.50, 7304.29.20.60, 7304.29.20.80, 7304.29.31.10, 7304.29.31.20, 7304.29.31.30, 7304.29.31.40, 7304.29.31.50, 7304.29.31.60, 7304.29.31.80, 7304.29.41.10, 7304.29.41.20, 7304.29.41.30, 7304.29.41.40, 7304.29.41.50, 7304.29.41.60, 7304.29.41.80, 7304.29.50.15, 7304.29.50.30, 7304.29.50.45, 7304.29.50.60, 7304.29.50.75, 7304.29.61.15, 7304.29.61.30, 7304.29.61.45, 7304.29.61.60, 7304.29.61.75, 7305.20.20.00, 7305.20.40.00, 7305.20.60.00, 7305.20.80.00, 7306.29.10.30, 7306.29.10.90, 7306.29.20.00, 7306.29.31.00, 7306.29.41.00, 7306.29.60.10, 7306.29.60.50, 7306.29.81.10, and 7306.29.81.50.

The merchandise subject to the investigation may also enter under the following HTSUS item numbers: 7304.39.00.24, 7304.39.00.28, 7304.39.00.32, 7304.39.00.36, 7304.39.00.40, 7304.39.00.44, 7304.39.00.48, 7304.39.00.52, 7304.39.00.56, 7304.39.00.62, 7304.39.00.68, 7304.39.00.72, 7304.39.00.76, 7304.39.00.80, 7304.59.60.00, 7304.59.80.15, 7304.59.80.20, 7304.59.80.25, 7304.59.80.30, 7304.59.80.35, 7304.59.80.40, 7304.59.80.45, 7304.59.80.50, 7304.59.80.55, 7304.59.80.60, 7304.59.80.65, 7304.59.80.70, 7304.59.80.80, 7305.31.40.00, 7305.31.60.90, 7306.30.50.55, 7306.30.50.90, 7306.50.50.50, and 7306.50.50.70.

The HTSUS subheadings above are provided for convenience and customs purposes only. The written description of the scope of the investigation is dispositive.

Scope Comments

On August 12, 2013, WSP Pipe Co., Ltd. (the sole mandatory respondent in the concurrent OCTG from Thailand antidumping duty investigation) submitted scope comments to the Department regarding “pierced billets” and asked that the Department determine that such merchandise was outside of the scope of this and other OCTG investigations. The petitioners filed rebuttal comments on August 22, 2013. As a result of our analysis of the scope comments, we have not made any modifications to the scope of the investigations. For more information, see the Preliminary Decision Memorandum.[1]

Tolling of Deadlines for Preliminary Determination

As explained in the memorandum from the Assistant Secretary for Enforcement and Compliance, the Department has exercised its discretion to toll deadlines for the duration of the closure of the Federal Government from October 1, through October 16, 2013.[2] Therefore, all deadlines in this segment of the proceeding have been extended by 16 days. If the new deadline falls on a non-business day, in accordance with the Department's practice, the deadline will become the next business day.[3] The revised deadline for the preliminary determination of this investigation is now February 14, 2014.

Methodology

The Department has conducted this investigation in accordance with section 731 of the Act. Export price has been calculated in accordance with section 772 of the Act. Normal value has been calculated in accordance with section 773 of the Act. For a full description of the methodology underlying our conclusions, see the Preliminary Decision Memorandum. The Preliminary Decision Memorandum is a public document and is made available to the public via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (IA ACCESS). IA ACCESS is available to registered users at https://iaaccess.trade.gov, and is available to all parties in the Department's Central Records Unit, located at room 7046 of the main Department of Commerce building. In addition, a complete version of the Preliminary Decision Memorandum can be found at http://enforcement.trade.gov/​frn/​. The signed and the electronic versions of the Preliminary Decision Memorandum are identical in content.

Preliminary Determination

The Department preliminarily determines that the following weighted-average dumping margins exist:

Exporter/ManufacturerWeighted-average dumping margin %
Chung Hung Steel Corp0.00
Tension Steel Industries Co., Ltd2.65
All Others2.65

Section 735(c)(5)(A) of the Act provides that the estimated “all others” rate shall be an amount equal to the weighted average of the estimated weighted-average dumping margins established for exporters and producers individually investigated, excluding any zero or de minimis margins, and any margins determined entirely under section 776 of the Act. The “All Others” rate is based on the weighted-average dumping margin calculated for Tension Steel Industries Co., Ltd., the only company for which the Department calculated a rate that was not de minimis.[4]

Disclosure and Public Comment

We will disclose the calculations performed to parties in this proceeding within five days of the date of Start Printed Page 10497publication of this notice in accordance with 19 CFR 351.224(b).

Case briefs or other written comments may be submitted to the Assistant Secretary for Enforcement and Compliance no later than seven days after the date on which the final verification report is issued in this proceeding and rebuttal briefs, limited to issues raised in case briefs, may be submitted no later than five days after the deadline date for case briefs.[5] Pursuant to 19 CFR 351.309(c)(2) and (d)(2), parties who submit case briefs or rebuttal briefs in this proceeding are encouraged to submit with each argument: (1) A statement of the issue; (2) a brief summary of the argument; and (3) a table of authorities.

Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing, or to participate if one is requested, must submit a written request to the Assistant Secretary for Enforcement and Compliance, U.S. Department of Commerce. All documents must be filed electronically using IA ACCESS. An electronically filed request must be received successfully in its entirety by IA ACCESS, by 5:00 p.m. Eastern Standard Time, within 30 days after the date of publication of this notice.[6] Requests should contain the party's name, address, and telephone number, the number of participants, and a list of the issues to be discussed. If a request for a hearing is made, the Department intends to hold the hearing at the U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230, at a time and date to be determined. Parties should confirm by telephone the date, time, and location of the hearing two days before the scheduled date.

Suspension of Liquidation

In accordance with section 733(d)(2) of the Act, we are directing U.S. Customs and Border Protection (CBP) to suspend liquidation of all entries of OCTG from Taiwan as described in the scope of the investigation section entered, or withdrawn from warehouse, for consumption on or after the date of publication of this notice in the Federal Register, except for those produced and exported by Chung Hung Steel Corp. Because the estimated weighted-average dumping margin for Chung Hung Steel Corp. is zero, we are not directing CBP to suspend liquidation of entries of the merchandise it produced and exported.

We will instruct CBP to require a cash deposit equal to the weighted-average amount by which the normal value exceeds export price, as indicated in the chart above.[7] These suspension of liquidation instructions will remain in effect until further notice.

Postponement of Final Determination and Extension of Provisional Measures

Pursuant to requests from Chung Hung Steel Corp. and Tension Steel Industries Co., Ltd., in this investigation, we are postponing the final determination. Accordingly, we will issue our final determination no later than 135 days after the date of publication of this preliminary determination, pursuant to section 735(a)(2) of the Act.[8] Further, Chung Hung Steel Corp. and Tension Steel Industries Co., Ltd., requested to extend the application of the provisional measures prescribed under section 733(d) of the Act and 19 CFR 351.210(e)(2), from a four-month period to a six-month period. The suspension of liquidation described above will be extended accordingly.

International Trade Commission (ITC) Notification

In accordance with section 733(f) of the Act, we have notified the ITC of our preliminary affirmative determination of sales at LTFV. Because the preliminary determination in this proceeding is affirmative, section 735(b)(2) of the Act requires that the ITC make its final determination as to whether the domestic industry in the United States is materially injured, or threatened with material injury, by reason of imports of OCTG from Taiwan before the later of 120 days after the date of this preliminary determination or 45 days after our final determination. Because we are postponing the deadline for our final determination to 135 days from the date of publication of this preliminary determination, as discussed above, the ITC will make its final determination no later than 45 days after our final determination.

This determination is issued and published in accordance with sections 733(f) and 777(i)(1) of the Act and 19 CFR 351.205(c).

Start Signature

Dated: February 14, 2014.

Paul Piquado,

Assistant Secretary for Enforcement and Compliance.

End Signature

Appendix

List of Topics Discussed in the Preliminary Decision Memorandum

  • Summary
  • Background
  • Period of Investigation
  • Postponement of Final Determination and Extension of Provisional Measures
  • Scope of the Investigation
  • Scope Comments
  • Selection of Respondents
  • Discussion of Methodology
  • Fair Value Comparisons

A. Determination of Comparison Method

B. Results of the DP Analysis

  • Product Comparisons
  • Alleged Affiliation
  • Date of Sale
  • U.S. Price
  • Normal Value

1. Home-Market Viability and Comparison-Market Selection

2. Level of Trade

3. Calculation of Normal Value based on Comparison Market Prices

4. Calculation of Normal Value based on Constructed Value

  • Cost of Production

1. Calculation of Cost of Production

2. Test of Third Country Sales Prices

3. Results of the COP Test

  • Currency Conversion
  • Verification
  • Recommendation
End Supplemental Information

Footnotes

1.  See the “Decision Memorandum for the Preliminary Determination in the Antidumping Duty Investigation of Certain Oil Country Tubular Goods from Taiwan,” from Christian Marsh, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, to Paul Piquado, Assistant Secretary for Enforcement and Compliance, dated concurrently with this determination and hereby adopted by this notice (Preliminary Decision Memorandum).

Back to Citation

2.  See Memorandum for the Record from Paul Piquado, Assistant Secretary for Enforcement and Compliance, “Deadlines Affected by the Shutdown of the Federal Government,” (October 18, 2013).

Back to Citation

3.  See Notice of Clarification: Application of “Next Business Day” Rule for Administrative Determination Deadlines Pursuant to the Tariff Act of 1930, As Amended, 70 FR 24533 (May 10, 2005). Due to the closure of the Federal Government on February 13, 2014, the Department completed this determination on the next business day (i.e., February 14, 2014). Id.

Back to Citation

4.  See section 735(c)(5)(A) of the Act.

Back to Citation

7.  See Modification of Regulations Regarding the Practice of Accepting Bonds During the Provisional Measures Period in Antidumping and Countervailing Duty Investigations, 76 FR 61042 (October 3, 2011).

Back to Citation

8.  See also 19 CFR 351.210(b)(2) and (e).

Back to Citation

[FR Doc. 2014-04088 Filed 2-24-14; 8:45 am]

BILLING CODE 3510-DS-P