Skip to Content

Rule

Stage 3 Helicopter Noise Certification Standards; Correction

Document Details

Information about this document as published in the Federal Register.

Enhanced Content

Relevant information about this document from Regulations.gov provides additional context. This information is not part of the official Federal Register document.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Federal Aviation Administration (FAA), DOT.

ACTION:

Final rule; correction.

SUMMARY:

The Federal Aviation Administration (FAA) published in the Federal Register of March 4, 2014 a document adopting more stringent noise certification standards for helicopters that are certificated in the United States (U.S.). Inadvertently the incorrect amendment number was assigned. This document corrects the amendment number cited in the heading of the final rule.

DATES:

This correction is effective April 14, 2014.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Katherine Haley, Office of Rulemaking, ARM-203, Federal Aviation Administration, 800 Independence Avenue SW., Washington, DC 20591; telephone (202) 267-5708; fax (202) 267-5075; email ralen.gao@faa.gov.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

The FAA published a document in the Federal Register of March 4, 2014 (79 FR 12040) as Amendment Number 36-29. In FR Doc. 2014-04479, Amdt. No. 36-29 is incorrect. This document corrects the amendment number published on March 4, 2014.

In FR Doc. 2014-04479, beginning on page 12040 in the Federal Register of March 4, 2014, make the following correction:

On page 12040, in the second column heading, correct the amendment number from “36-29” to “36-30”.

Start Signature

Issued in Washington, DC, on April 4, 2014.

Lirio Liu,

Director, Office of Rulemaking.

End Signature End Supplemental Information

[FR Doc. 2014-07941 Filed 4-11-14; 8:45 am]

BILLING CODE 4910-13-P