This PDF is the current document as it appeared on Public Inspection on 05/27/2014 at 08:45 am.
The Department of Labor (DOL) is submitting the Occupational Safety and Health Administration (OSHA) sponsored information collection request (ICR) titled, “Gear Certification Standard,” to the Office of Management and Budget (OMB) for review and approval for continued use, without change, in accordance with the Paperwork Reduction Act of 1995 (PRA), 44 U.S.C. 3501 et seq. Public comments on the ICR are invited.
The OMB will consider all written comments that agency receives on or before June 27, 2014.
A copy of this ICR with applicable supporting documentation; including a description of the likely respondents, proposed frequency of response, and estimated total burden may be obtained free of charge from the RegInfo.gov Web site at http://www.reginfo.gov/public/do/PRAViewICR?ref_nbr=201402-1218-005 (this link will only become active on the day following publication of this notice) or by contacting Michel Smyth by telephone at 202-693-4129, TTY 202-693-8064, (these are not toll-free numbers) or by email at DOL_PRA_PUBLIC@dol.gov.
Submit comments about this request by mail or courier to the Office of Information and Regulatory Affairs, Attn: OMB Desk Officer for DOL-OSHA, Office of Management and Budget, Room 10235, 725 17th Street NW., Washington, DC 20503; by Fax: 202-395-6881 (this is not a toll-free number); or by email: OIRA_submission@omb.eop.gov. Commenters are encouraged, but not required, to send a courtesy copy of any comments by mail or courier to the U.S. Department of Labor-OASAM, Office of the Chief Information Officer, Attn: Departmental Information Compliance Management Program, Room N1301, 200 Constitution Avenue NW., Washington, DC 20210; or by email: DOL_PRA_PUBLIC@dol.gov.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Contact Michel Smyth by telephone at 202-693-4129, TTY 202-693-8064, (these are not toll-free numbers) or by email at DOL_PRA_PUBLIC@dol.gov.End Further Info End Preamble Start Supplemental Information
This ICR seeks to extend PRA authority for the Gear Certification Standard information collection. Applicants use Form OSHA-70 in order to seek OSHA accreditation to be able to test or examine certain equipment and material handling devices, as required under the OSHA maritime regulations, 29 CFR part 1917 (Marine Terminals) and 29 CFR part 1918 (Longshoring). The OSHA uses this information to accredit companies to inspect and provide certification for cranes, derricks, and accessory gear used in the longshoring, marine terminal, and shipyard industries. Certain types of vessel cargo gear and shore-based material handling devices used in maritime operations are required to have accredited companies conduct examinations. The accredited company either issues a certificate to the owner that the piece of equipment has passed the examination or issues a certificate to the owner of any deficiency found during the examination. The owner is responsible for maintaining a copy of the certification record. The Occupational Safety and Health Act and Longshore and Harbor Workers Compensation Act authorize this information collection. See 29 U.S.C. 651, 653, 655, 657; 33 U.S.C. 18.
This information collection is subject to the PRA. A Federal agency generally cannot conduct or sponsor a collection of information, and the public is generally not required to respond to an information collection, unless it is approved by the OMB under the PRA and displays a currently valid OMB Control Number. In addition, notwithstanding any other provisions of law, no person shall generally be subject to penalty for failing to comply with a collection of information that does not display a valid Control Number. See 5 CFR 1320.5(a) and 1320.6. The DOL obtains OMB approval for this information collection under Control Number 1218-0003.
OMB authorization for an ICR cannot be for more than three (3) years without renewal, and the current approval for this collection is scheduled to expire on May 31, 2014. The DOL seeks to extend PRA authorization for this information collection for three (3) more years, without any change to existing requirements. The DOL notes that existing information collection requirements submitted to the OMB receive a month-to-month extension while they undergo review. For additional substantive information about this ICR, see the related notice published in the Federal Register on January 24, 2014 (79 FR 4182).Start Printed Page 30656
Interested parties are encouraged to send comments to the OMB, Office of Information and Regulatory Affairs at the address shown in the ADDRESSES section within 30 days of publication of this notice in the Federal Register. In order to help ensure appropriate consideration, comments should mention OMB Control Number 1218-0003. The OMB is particularly interested in comments that:
- Evaluate whether the proposed collection of information is necessary for the proper performance of the functions of the agency, including whether the information will have practical utility;
- Evaluate the accuracy of the agency's estimate of the burden of the proposed collection of information, including the validity of the methodology and assumptions used;
- Enhance the quality, utility, and clarity of the information to be collected; and
- Minimize the burden of the collection of information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting electronic submission of responses.
Title of Collection: Gear Certification Standard.
OMB Control Number: 1218-0003.
Affected Public: Private Sector—businesses or other for-profits.
Total Estimated Number of Respondents: 1,111.
Total Estimated Number of Responses: 6,357.
Total Estimated Annual Time Burden: 184 hours.
Total Estimated Annual Other Costs Burden: $2,878,090.Start Signature
Dated: May 20, 2014.
Departmental Clearance Officer.
[FR Doc. 2014-12192 Filed 5-27-14; 8:45 am]
BILLING CODE 4510-26-P