This PDF is the current document as it appeared on Public Inspection on 09/29/2015 at 08:45 am.
U.S. Customs and Border Protection, Department of Homeland Security.
Notice is hereby given, pursuant to CBP regulations, that Camin Cargo Control, Inc., has been approved to gauge and accredited to test petroleum and certain petroleum products for customs purposes for the next three years as of August 27, 2014.
Effective Dates: The accreditation and approval of Camin Cargo Control, Inc., as commercial gauger and laboratory became effective on August 27, 2014. The next triennial inspection date will be scheduled for August 2017.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Approved Gauger and Accredited Laboratories Manager, Laboratories and Scientific Services Directorate, U.S. Customs and Border Protection, 1300 Pennsylvania Avenue NW., Suite 1500N, Washington, DC 20229, tel. 202-344-1060.End Further Info End Preamble Start Supplemental Information
Notice is hereby given pursuant to 19 CFR 151.12 and 19 CFR 151.13, that Camin Cargo Control, Inc., 230 Marion Ave., Linden, NJ 07036, has been approved to gauge and accredited to test petroleum and certain petroleum products for customs purposes, in accordance with the provisions of 19 CFR 151.12 and 19 CFR 151.13. Camin Cargo Control, Inc., is approved for the following gauging procedures for petroleum and certain petroleum products set forth by the American Petroleum Institute (API):
Camin Cargo Control, Inc., is accredited for the following laboratory analysis procedures and methods for petroleum and certain petroleum products set forth by the U.S. Customs and Border Protection Laboratory Methods (CBPL) and American Society for Testing and Materials (ASTM):
|27-01||ASTM D-287||Standard Test Method for API Gravity of Crude Petroleum Products and Petroleum Products (Hydrometer Method).|
|27-03||ASTM D-4006||Standard Test Method for Water in Crude Oil by Distillation.|
|27-04||ASTM D-95||Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation.|
|27-06||ASTM D-473||Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method.|
|27-08||ASTM D-86||Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure.|
|27-13||ASTM D-4294||Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry.|
|27-48||ASTM D-4052||Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter.|
|27-58||ASTM D-5191||Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure.|
|N/A||ASTM D1319||Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption.|
|N/A||ASTM D-3606||Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography.|
|Start Printed Page 58748|
|N/A||ASTM D-5453||Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence.|
|N/A||ASTM D-5599||Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection.|
|N/A||ASTM D-5769||Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry.|
|N/A||ASTM D-2699||Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel.|
|N/A||ASTM D-2700||Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel.|
|N/A||ASTM D-5134||Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography.|
Anyone wishing to employ this entity to conduct laboratory analyses and gauger services should request and receive written assurances from the entity that it is accredited or approved by the U.S. Customs and Border Protection to conduct the specific test or gauger service requested. Alternatively, inquiries regarding the specific test or gauger service this entity is accredited or approved to perform may be directed to the U.S. Customs and Border Protection by calling (202) 344-1060. The inquiry may also be sent to firstname.lastname@example.org. Please reference the Web site listed below for the current CBP Approved Gaugers and Accredited Laboratories List. http://www.cbp.gov/about/labs-scientific/commercial-gaugers-and-laboratories.Start Signature
Date: September 18, 2015.
Ira S. Reese,
Executive Director, Laboratories and Scientific Services Directorate.
[FR Doc. 2015-24751 Filed 9-29-15; 8:45 am]
BILLING CODE 9111-14-P