Skip to Content


Establishment of Class E Airspace; Newberry, MI

Document Details

Information about this document as published in the Federal Register.

Document Statistics
Document page views are updated periodically throughout the day and are cumulative counts for this document including its time on Public Inspection. Counts are subject to sampling, reprocessing and revision (up or down) throughout the day.
Enhanced Content

Relevant information about this document from provides additional context. This information is not part of the official Federal Register document.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble


Federal Aviation Administration (FAA), DOT.


Final rule; correction.


This action corrects an error in the legal description of a final rule published in the Federal Register of September 24, 2015, that establishes Class E airspace at the Newberry VHF Omni-Directional Range/Distance Measuring Equipment (VOR/DME), Newberry, MI. The legal description noted exclusionary language for Federal airways and Canadian airspace not required for this airspace.


Effective date: 0901 UTC, December 10, 2015. The Director of the Federal Register approves this incorporation by reference action under 1 Code of Federal Regulations, Part 51, subject to the annual revision of FAA Order 7400.9 and publication of conforming amendments.

Start Further Info


Raul Garza, Jr., Central Service Center, Operations Support Group, Federal Aviation Administration, Southwest Region, 10101 Hillwood Parkway., Fort Worth, TX 76177; telephone 817-222-5874.

End Further Info End Preamble Start Supplemental Information



On September 24, 2015, a final rule was published in the Federal Register establishing Class E airspace at the Newberry VOR/DME, Newberry, MI (80 FR 57522) Docket No. FAA-2015-1869. Subsequent to publication, the FAA found that the exclusionary language for Federal airways and Canadian airspace noted in the airspace description is not required and, therefore, is removed.

Final Rule Correction

Accordingly, pursuant to the authority delegated to me, in the Federal Register of September 24, 2015, (80 FR 57522) FR Doc. 2015-23987, on Start Printed Page 73104page 57523, column 2, beginning on line 26, remove “, excluding that airspace within Federal airways and within Canadian airspace”.

Start Signature

Issued in Fort Worth, TX, on November 10, 2015.

Robert W. Beck,

Manager, Operations Support Group, ATO Central Service Center.

End Signature End Supplemental Information

[FR Doc. 2015-29704 Filed 11-23-15; 8:45 am]