Skip to Content

We invite you to try out our new beta eCFR site at https://ecfr.federalregister.gov. We’ve made big changes to make the eCFR easier to use. Be sure to leave feedback using the 'Feedback' button on the bottom right of each page!

Rule

The Commerce Control List

Document Details

Information about this document as published in the Federal Register.

Document Statistics
Document page views are updated periodically throughout the day and are cumulative counts for this document. Counts are subject to sampling, reprocessing and revision (up or down) throughout the day.
Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

ACTION:

CFR Correction

In Title 15 of the Code of Federal Regulations, Parts 300 to 799, revised as of January 1, 2015, on page 829, in supplement no. 1 to part 774, make the following two corrections:

Start Amendment Part

1. In Category 2, ECCN 2B008, in the List of Items Controlled section, under “Items”, correctly revise paragraph a. to read as follows:

End Amendment Part

2B008 Assemblies or Units, Specially Designed for Machine Tools, or Dimensional Inspection or Measuring Systems and Equipment, as Follows (see List of Items Controlled)

* * * * *

List of Items Controlled

* * * * *

Items:

a. Linear position feedback units having an overall “accuracy” less (better) than (800 + (600 × L × 10−3)) nm (L equals the effective length in mm);

N.B.: For “laser” systems see also 2B006.b.1.c and d.

Start Amendment Part

2. In Category 2, ECCN 2B009, in the List of Items Controlled section, under “Items”, correctly revise paragraph a. to read “a. Three or more axes which can be coordinated simultaneously for “contouring control”; and”

End Amendment Part End Preamble

[FR Doc. 2015-31130 Filed 12-9-15; 8:45 am]

BILLING CODE 1505-01-D