SUPPLEMENTARY INFORMATION:

Background

On October 1, 2015, the Department initiated the first sunset review of the CVD Order  ^[1] on seamless pipe from the PRC pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act).^[2] TMK IPSCO, United States Steel Corporation (U.S. Steel) and Vallourec Star, L.P. (Vallourec) (collectively, the petitioners) filed timely notices of intent to participate on October 13, 2015, and October 15, 2015, in accordance with 19 CFR 351.218(d)(1).^[3] Each of these companies claimed interested party status under section 771(9)(C) of the Act, as U.S. producers of the domestic like product.

The Department received an adequate substantive response collectively from the domestic industry within the 30-day deadline specified in 19 CFR 351.218(d)(3)(i).^[4] The Department did not receive a substantive response from the Government of the PRC or any respondent interested party to the proceeding. Because the Department received no response from the respondent interested parties, the Department conducted an expedited review of this CVD order, pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(l)(ii)(B)(2) and (C)(2).

Scope of the Order

The scope of this order consists of certain seamless carbon and alloy steel (other than stainless steel) pipes and redraw hollows, less than or equal to 16 inches (406.4 mm) in outside diameter, regardless of wall-thickness, manufacturing process ( e.g., hot-finished or cold-drawn), end finish ( e.g., plain end, beveled end, upset end, threaded, or threaded and coupled), or surface finish ( e.g., bare, lacquered or coated). Redraw hollows are any unfinished carbon or alloy steel (other than stainless steel) pipe or “hollow profiles” suitable for cold finishing operations, such as cold drawing, to meet the American Society for Testing and Materials (“ASTM”) or American Petroleum Institute (“API”) specifications referenced below, or comparable specifications. Specifically included within the scope are seamless carbon and alloy steel (other than ( printed page 5986) stainless steel) standard, line, and pressure pipes produced to the ASTM A-53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-589, ASTM A-795, ASTM A-1024, and the API 5L specifications, or comparable specifications, and meeting the physical parameters described above, regardless of application, with the exception of the exclusion discussed below.

Specifically excluded from the scope of the order are: (1) All pipes meeting aerospace, hydraulic, and bearing tubing specifications; (2) all pipes meeting the chemical requirements of ASTM A-335, whether finished or unfinished; and (3) unattached couplings. Also excluded from the scope of the order are all mechanical, boiler, condenser and heat exchange tubing, except when such products conform to the dimensional requirements, i.e., outside diameter and wall thickness of ASTM A-53, ASTM A-106 or API 5L specifications.

The merchandise covered by the order is currently classified in the Harmonized Tariff Schedule of the United States (“HTSUS”) under item numbers: 7304.19.1020, 7304.19.1030, 7304.19.1045, 7304.19.1060, 7304.19.5020, 7304.19.5050, 7304.31.6050, 7304.39.0016, 7304.39.0020, 7304.39.0024, 7304.39.0028, 7304.39.0032, 7304.39.0036, 7304.39.0040, 7304.39.0044, 7304.39.0048, 7304.39.0052, 7304.39.0056, 7304.39.0062, 7304.39.0068, 7304.39.0072, 7304.51.5005, 7304.51.5060, 7304.59.6000, 7304.59.8010, 7304.59.8015, 7304.59.8020, 7304.59.8025, 7304.59.8030, 7304.59.8035, 7304.59.8040, 7304.59.8045, 7304.59.8050, 7304.59.8055, 7304.59.8060, 7304.59.8065, and 7304.59.8070. Although the HTSUS subheadings are provided for convenience and customs purposes, our written description of the merchandise subject to this scope is dispositive.

Analysis of Comments Received

All issues raised in this review are addressed in the Issues and Decision Memorandum, which is dated concurrently with this notice. The issues discussed in the Issues and Decision Memorandum include the likelihood of continuation or recurrence of a countervailable subsidy and the net countervailable subsidy likely to prevail if the CVD Order were revoked. Parties can find a complete discussion of all issues raised in this expedited sunset review and the corresponding recommendations in this public memorandum, which is on file electronically via the Enforcement and Compliance Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at http://access.trade.gov and to all parties in the Central Records Unit, Room B8024 of the main Department of Commerce building. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly on the Internet at http://enforcement.trade.gov/​frn/​index.html. The signed Issues and Decision Memorandum and the electronic versions of the Issues and Decision Memorandum are identical in content.

Final Results of Review

Pursuant to sections 752(b)(1) and (3) of the Act, we determine that revocation of the CVD Order on seamless pipe from the PRC would be likely to lead to continuation or recurrence of a net countervailable subsidy at the rates listed below:

Notification Regarding Administrative Protective Order

This notice serves as the only reminder to parties subject to administrative protective order (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305. Timely notification of return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation.

The Department is issuing and publishing these final results and this notice in accordance with sections 751(c), 752(b), and 777(i)(1) of the Act.