This site displays a prototype of a “Web 2.0” version of the daily
Federal Register. It is not an official legal edition of the Federal
Register, and does not replace the official print version or the official
electronic version on GPO’s govinfo.gov.
The documents posted on this site are XML renditions of published Federal
Register documents. Each document posted on the site includes a link to the
corresponding official PDF file on govinfo.gov. This prototype edition of the
daily Federal Register on FederalRegister.gov will remain an unofficial
informational resource until the Administrative Committee of the Federal
Register (ACFR) issues a regulation granting it official legal status.
For complete information about, and access to, our official publications
and services, go to
About the Federal Register
on NARA's archives.gov.
The OFR/GPO partnership is committed to presenting accurate and reliable
regulatory information on FederalRegister.gov with the objective of
establishing the XML-based Federal Register as an ACFR-sanctioned
publication in the future. While every effort has been made to ensure that
the material on FederalRegister.gov is accurately displayed, consistent with
the official SGML-based PDF version on govinfo.gov, those relying on it for
legal research should verify their results against an official edition of
the Federal Register. Until the ACFR grants it official status, the XML
rendition of the daily Federal Register on FederalRegister.gov does not
provide legal notice to the public or judicial notice to the courts.
Notice
Enter a search term or FR citation e.g.
88 FR 38230 FR 78782024-13208USDA09/05/24RULE0503-AA39SORN
Choosing an item from
full text search results
will bring you to those results. Pressing enter in the search box
will also bring you to search results.
Choosing an item from
suggestions
will bring you directly to the content.
This table of contents is a navigational tool, processed from the
headings within the legal text of Federal Register documents.
This repetition of headings to form internal navigation links
has no substantive legal effect.
Document page views are updated periodically throughout the day and are
cumulative counts for this document. Counts are subject to sampling,
reprocessing and revision (up or down) throughout the day.
Page views
270
as of
10/13/2026 at 6:15 pm EDT
Other Formats
Enhanced Content - Other Formats
This document is also available in the following formats:
This PDF is FR Doc. 2016-04198 as it appeared on Public Inspection on
02/25/2016 at 8:45 am.
If you are using public inspection listings for legal research, you
should verify the contents of the documents against a final, official
edition of the Federal Register. Only official editions of the
Federal Register provide legal notice of publication to the public and judicial notice
to the courts under 44 U.S.C. 1503 & 1507.
Learn more here.
Published Document: 2016-04198 (81 FR 9806)
This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.
AGENCY:
Enforcement and Compliance, International Trade Administration, Department of Commerce.
SUMMARY:
For the preliminary results of administrative review of the antidumping duty order on stainless steel butt-weld pipe fittings from Italy, the Department of Commerce (the Department) preliminarily determines that sales of subject merchandise by Filmag Italia Spa (Filmag) were made at less than normal value during the period of review.[1]
The period of review is February 1, 2014, through January 31, 2015. Interested parties are invited to comment on these preliminary results.
DATES:
Effective Date:
February 26, 2016.
FOR FURTHER INFORMATION CONTACT:
Edythe Artman or Brian Davis, AD/CVD Operations, Office VI, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-3931 or (202) 482-7924, respectively.
SUPPLEMENTARY INFORMATION:
Scope of the Order
For purposes of the order, the product covered is certain stainless steel butt-weld pipe fittings. Stainless steel butt-weld pipe fittings are under 14 inches in outside diameter (based on nominal pipe size), whether finished or unfinished. The product encompasses all grades of stainless steel and “commodity” and “specialty” fittings. Specifically excluded from the definition are threaded, grooved, and bolted fittings, and fittings made from any material other than stainless steel.
The butt-weld fittings subject to the order is currently classifiable under subheading 7307.23.0000 of the Harmonized Tariff Schedule of the United States (HTSUS). Although the HTSUS subheading is provided for convenience and customs purposes, the written description of the scope of the order is dispositive. A full description of the scope of the order is contained in the memorandum from Christian Marsh, Deputy Assistant Secretary for AD/CVD Operations, to Paul Piquado, Assistant Secretary for Enforcement and Compliance, titled “Decision Memorandum for Preliminary Results of Antidumping Duty Administrative Review: Stainless Steel Butt-Weld Pipe Fittings from Italy; 2014-2015” (Preliminary Decision Memorandum), which is issued concurrent with and hereby adopted by this notice.
The Preliminary Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). Access to ACCESS is available to registered users at
http://access.trade.gov
and is available to all parties in the Central Records Unit, Room B8024 of the main Department of
( printed page 9807)
Commerce building. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly on the Internet at
http://enforcement.trade.gov/frn/index.html.
A list of topics discussed in the Preliminary Decision Memorandum is attached as an Appendix to this notice. The signed Preliminary Decision Memorandum and the electronic versions of the Preliminary Decision Memorandum are identical in content.
Tolling of Deadline
As explained in the memorandum from the Acting Assistant Secretary for Enforcement and Compliance, the Department has exercised its discretion to toll all administrative deadlines due to the recent closure of the Federal Government. All deadlines in this segment of the proceeding have been extended by four business days. The revised deadline for the preliminary results of this review is now February 22, 2016.[2]
Methodology
The Department is conducting this review in accordance with section 751(a)(2) of the Tariff Act of 1930, as amended (the Act). Export price has been calculated in accordance with section 772 of the Act. Normal value has been calculated in accordance with section 773 of the Act. For a full description of the methodology underlying our conclusions,
see
the Preliminary Decision Memorandum.
Preliminary Results of Review
We preliminarily determine that, for the period February 1, 2014, through January 31, 2015, the following dumping margin exists:
Manufacturer/exporter
Weighted-
average margin
(percent)
Filmag Italia Spa
35.86
Disclosure and Public Comment
The Department will disclose to parties to the proceeding any calculations performed in connection with these preliminary results of review within five days after the date of publication of this notice.[3]
Interested parties may submit case briefs to the Department in response to these preliminary results no later than 30 days after the publication of these preliminary results.[4]
Rebuttal briefs, the content of which is limited to the issues raised in the case briefs, must be filed within five days from the deadline date for the submission of case briefs.[5]
Parties who submit arguments in this proceeding are requested to submit with each argument: (1) A statement of the issue; (2) a brief summary of the argument; and (3) a table of authorities.[6]
Case and rebuttal briefs should be filed using ACCESS.[7]
Case and rebuttal briefs must be served on interested parties.[8]
Executive summaries should be limited to five pages total, including footnotes.
Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing must submit a written request to the Assistant Secretary for Enforcement and Compliance within 30 days of the date of publication of this notice. Requests should contain: (1) The party's name, address and telephone number; (2) the number of participants; and (3) a list of issues parties intend to discuss. Issues raised in the hearing will be limited to those raised in the respective case and rebuttal briefs. If a request for a hearing is made, the Department intends to hold the hearing at the U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230, at a date and time to be determined.[9]
Parties should confirm the date, time, and location of the hearing by telephone two days before the scheduled date.
The Department intends to publish the final results of this administrative review, including the results of its analysis of issues addressed in any case or rebuttal brief, no later than 120 days after publication of these preliminary results, unless extended.[10]
Assessment Rates
Upon completion of this administrative review, the Department shall determine, and Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries. If the respondent's weighted-average dumping margin is not zero or
de minimis
in the final results of this review, we will calculate importer- or customer-specific
ad valorem
assessment rates for the merchandise based on the ratio of the total amount of antidumping duties calculated for the examined sales made during the period of review to the total customs value of the sales used to calculate those duties in accordance with 19 CFR 351.212(b)(1). Where an importer-specific
ad valorem
assessment rate is zero or
de minimis,
we will instruct CBP to liquidate the appropriate entries without regard to antidumping duties in accordance with 19 CFR 351.106(c)(2). If the respondent's weighted-average dumping margin is zero or
de minimis
in the final results of review, we will instruct CBP not to assess duties on any of its entries in accordance with the
Final Modification for Reviews, i.e.,
“{w}here the weighted-average margin of dumping for the exporter is determined to be zero or
de minimis,
no antidumping duties will be assessed.” [11]
We intend to issue liquidation instructions to CBP 15 days after publication of the final results of this review.
Cash Deposit Requirements
The following cash deposit requirements will be effective upon publication of the final results of this administrative review for all shipments of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the publication date of the final results of this administrative review, as provided by section 751(a)(2)(C) of the Act: (1) The cash deposit rate for Filmag will be that established in the final results of this administrative review; (2) for previously reviewed or investigated companies, the cash deposit rate will continue to be the company-specific rate published for the most recent period; (3) if the exporter is not a firm covered in this review, a prior review, or in the investigation but the manufacturer is, the cash deposit rate will be the rate established for the most recent review period for the manufacturer of the merchandise; and (4) the cash deposit rate for all other manufacturers or exporters will continue to be the all-others rate of 26.59 percent, the rate established in the investigation of this proceeding.[12]
These cash deposit requirements, when imposed, shall remain in effect until further notice.
Notification to Importers
This notice also serves as a reminder to importers of their responsibility
( printed page 9808)
under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Department's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties.
We are issuing and publishing this notice in accordance with sections 751(a)(1) and 777(i)(1) of the Act.
Dated: February 19, 2016.
Ronald K. Lorentzen,
Deputy Assistant Secretary for Enforcement and Compliance.
Appendix I
List of Topics Discussed in the Preliminary Decision Memorandum
1. Background
2. Scope of the Order
3. Date of Sale
4. Comparisons to Normal Value
A. Product Comparisons
B. Determination of Comparison Method
C. Export Price
D. Normal Value
1. Home Market Viability
2. Level of Trade
3. Cost of Production
4. Calculation of Normal Value Based on Comparison Market Prices
5. Price-to-Constructed Value Comparison
E. Currency Conversion
5. Recommendation
Footnotes
1.
See Initiation of Antidumping and Countervailing Duty Administrative Reviews,80 FR 18202 (April 3, 2015).
2.
See
Memorandum to the file from Ron Lorentzen, Acting Assistant Secretary for Enforcement and Compliance, regarding “Tolling of Administrative Deadlines As a Result of the Government Closure During Snowstorm Jonas,” dated January 27, 2016.
11.
See Antidumping Proceedings: Calculation of the Weighted-Average Dumping Margin and Assessment Rate in Certain Antidumping Proceedings: Final Modification,77 FR 8101, 8102 (February 14, 2012) (
Final Modification for Reviews).
12.
See Notice of Final Determination of Sales at Less Than Fair Value: Stainless Steel Butt-Weld Pipe Fittings from Italy,65 FR 81830 (December 27, 2000).