Skip to Content

Notice

Certain Cold-Rolled Steel Flat Products From India: Final Determination of Sales at Less Than Fair Value

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The Department of Commerce (“the Department”) determines that imports of certain cold-rolled steel flat products (“cold-rolled steel”) from India are being, or are likely to be, sold in the United States at less than fair value (“LTFV”). The final estimated weighted-average dumping margins of sales at LTFV are listed below in the section entitled “Final Determination Margins.” The period of investigation (“POI”) is July 1, 2014, through June 30, 2015.

DATES:

Effective July 29, 2016.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Patrick O'Connor, AD/CVD Operations, Office IV, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-0989.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

Background

The Department published in the Federal Register the preliminary determination on March 7, 2016.[1] A summary of the events that have occurred since the Department published the Preliminary Determination, as well as a full discussion of the issues raised by parties for this final determination, may be found in the Issues and Decision Memorandum.[2] The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at http://access.trade.gov and is available to all parties in the Central Records Unit, Room B8024 of the main Department of Commerce building. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at http://enforcement.trade.gov. The signed and electronic versions of the Issues and Decision Memorandum are identical in content.

Scope of the Investigation

The products covered by this investigation are cold-rolled steel from India. For a full description of the scope of the investigation, see Appendix I to this notice.

Scope Comments

In accordance with the Preliminary Scope Determination,[3] the Department set aside a period of time for parties to address scope issues in case briefs or other written comments on scope issues.

For a summary of the product coverage comments and rebuttal responses submitted on the records of the cold-rolled steel investigations, and accompanying discussion and analysis of all comments timely received, see the Final Scope Decision Memorandum.[4] The Final Scope Decision Memorandum is incorporated by, and hereby adopted by, this notice.

Analysis of Comments Received

All issues raised in the case and rebuttal briefs that were submitted by parties in this investigation are addressed in the Issues and Decision Memorandum accompanying this notice, and which is hereby adopted by this notice. A list of the issues addressed in the Issues and Decision Memorandum is attached to this notice at Appendix II.

Verification

As provided in section 782(i) of the Tariff Act of 1930, as amended (the “Act”), in February and March 2016, the Department verified the sales and cost data reported by the collapsed entity JSW Steel Limited (“JSWSL”)/JSW Start Printed Page 49939Coated Products Limited (“JSCPL”) (collectively “JSW”),the sole mandatory respondent in this investigation, pursuant to section 782(i) of the Act. We used standard verification procedures, including an examination of relevant accounting and production records, and original source documents provided by JSW.

Changes to the Dumping Margin Calculations Since the Preliminary Determination

Based on our analysis of the comments received and our findings at verification, we made certain changes to the margin calculation for JSW. For a discussion of these changes, see the Issues and Decision Memorandum. We have also revised the all-others rate.

All-Others Rate

Section 735(c)(5)(A) of the Act provides that the estimated “all-others” rate shall be an amount equal to the weighted average of the estimated weighted-average dumping margins established for exporters and producers individually investigated, excluding any zero or de minimis dumping margins, and any dumping margins determined entirely under section 776 of the Act. We based our calculation of the “all-others” rate on the dumping margin calculated for JSW, the only mandatory respondent in this investigation.

Final Determination Margins

The Department determines that the following estimated weighted-average dumping margin exists:

Exporter/ManufacturerWeighted-average dumping margins (percent)Cash deposit rate (percent)
JSW Steel Limited/JSW Coated Products Limited7.606.70
All-Others7.606.70

Disclosure

We intend to disclose to parties in this proceeding the calculations performed for this final determination within five days of the date of public announcement of our final determination, in accordance with 19 CFR 351.224(b).

Continuation of Suspension of Liquidation

Pursuant to section 735(c)(1)(B) of the Act, the Department will instruct U.S. Customs and Border Protection (“CBP”) to continue to suspend liquidation of all entries of cold-rolled steel from India which were entered, or withdrawn from warehouse, for consumption on or after March 7, 2016, the date of publication of the Preliminary Determination. We also will instruct CBP to require a cash deposit equal to the weighted-average amount by which normal value exceeds U.S. price, as indicated in the table above, adjusted, where appropriate, for export subsidies.

Where the product under investigation is also subject to a concurrent countervailing duty investigation, we instruct CBP to require a cash deposit less the amount of the countervailing duty determined to constitute any export subsidies. Therefore, in the event that a countervailing duty order is issued and suspension of liquidation is resumed in the companion countervailing duty investigation on cold-rolled steel from India, the Department will instruct CBP to require cash deposits adjusted by the amount of export subsidies, as appropriate. These adjustments are reflected in the final column of the rate chart, above. Until such suspension of liquidation is resumed in the companion countervailing duty investigation, and so long as suspension of liquidation continues under this antidumping duty investigation, the cash deposit rates for this antidumping duty investigation will be the rates identified in the weighted-average margin column in the rate chart, above.

International Trade Commission Notification

In accordance with section 735(d) of the Act, we will notify the U.S. International Trade Commission (“ITC”) of our final determination. As our final determination is affirmative, in accordance with section 735(b)(2) of the Act, the ITC will determine within 45 days of the final determination whether the domestic industry in the United States is materially injured, or threatened with material injury, by reason of imports, or sales (or the likelihood of sales) for importation, of the subject merchandise. If the ITC determines that such injury exists, the Department will issue an antidumping duty order directing CBP to assess, upon further instruction by the Department, antidumping duties on all imports of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the effective date of the suspension of liquidation.

Notification Regarding Administrative Protective Orders (“APOs”)

This notice will serve as a reminder to parties subject to APOs of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely written notification of the destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation.

This determination and notice are issued and published in accordance with sections 735(d) and 777(i) of the Act.

Start Signature

Dated: July 20, 2016.

Paul Piquado,

Assistant Secretary for Enforcement and Compliance.

End Signature

Appendix I

Scope of the Investigation

The products covered by this investigation are certain cold-rolled (cold-reduced), flat-rolled steel products, whether or not annealed, painted, varnished, or coated with plastics or other non-metallic substances. The products covered do not include those that are clad, plated, or coated with metal. The products covered include coils that have a width or other lateral measurement (“width”) of 12.7 mm or greater, regardless of form of coil (e.g., in successively superimposed layers, spirally oscillating, etc.). The products covered also include products not in coils (e.g., in straight lengths) of a thickness less than 4.75 mm and a width that is 12.7 mm or greater and that measures at least 10 times the thickness. The products covered also include products not in coils (e.g., in straight lengths) of a thickness of 4.75 mm or more and a width exceeding 150 mm and measuring at least twice the thickness. The products described above may be rectangular, square, circular, or other shape and include products of either rectangular or non-rectangular cross-section where such cross-section is achieved subsequent to the rolling process, i.e., products which have been “worked after rolling” (e.g., products which have been beveled or rounded at the edges). For purposes of the width and thickness requirements referenced above:

(1) Where the nominal and actual measurements vary, a product is within the Start Printed Page 49940scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set forth above, and

(2) where the width and thickness vary for a specific product (e.g., the thickness of certain products with non-rectangular cross-section, the width of certain products with non-rectangular shape, etc.), the measurement at its greatest width or thickness applies.

Steel products included in the scope of this investigation are products in which: (1) Iron predominates, by weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by weight; and (3) none of the elements listed below exceeds the quantity, by weight, respectively indicated:

  • 2.50 percent of manganese, or
  • 3.30 percent of silicon, or
  • 1.50 percent of copper, or
  • 1.50 percent of aluminum, or
  • 1.25 percent of chromium, or
  • 0.30 percent of cobalt, or
  • 0.40 percent of lead, or
  • 2.00 percent of nickel, or
  • 0.30 percent of tungsten (also called wolfram), or
  • 0.80 percent of molybdenum, or
  • 0.10 percent of niobium (also called columbium), or
  • 0.30 percent of vanadium, or
  • 0.30 percent of zirconium

Unless specifically excluded, products are included in this scope regardless of levels of boron and titanium.

For example, specifically included in this scope are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (IF)) steels, high strength low alloy (HSLA) steels, motor lamination steels, Advanced High Strength Steels (AHSS), and Ultra High Strength Steels (UHSS). IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium and/or niobium added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum. Motor lamination steels contain micro-alloying levels of elements such as silicon and aluminum. AHSS and UHSS are considered high tensile strength and high elongation steels, although AHSS and UHSS are covered whether or not they are high tensile strength or high elongation steels.

Subject merchandise includes cold-rolled steel that has been further processed in a third country, including but not limited to annealing, tempering, painting, varnishing, trimming, cutting, punching, and/or slitting, or any other processing that would not otherwise remove the merchandise from the scope of the investigation if performed in the country of manufacture of the cold-rolled steel.

All products that meet the written physical description, and in which the chemistry quantities do not exceed any one of the noted element levels listed above, are within the scope of this investigation unless specifically excluded. The following products are outside of and/or specifically excluded from the scope of this investigation:

  • Ball bearing steels; [5]
  • Tool steels; [6]
  • Silico-manganese steel;[7]
  • Grain-oriented electrical steels (GOES) as defined in the final determination of the U.S. Department of Commerce in Grain-Oriented Electrical Steel From Germany, Japan, and Poland.[8]
  • Non-Oriented Electrical Steels (NOES), as defined in the antidumping orders issued by the U.S. Department of Commerce in Non-Oriented Electrical Steel From the People's Republic of China, Germany, Japan, the Republic of Korea, Sweden, and Taiwan.[9]

The products subject to this investigation are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers: 7209.15.0000, 7209.16.0030, 7209.16.0060, 7209.16.0070, 7209.16.0091, 7209.17.0030, 7209.17.0060, 7209.17.0070, 7209.17.0091, 7209.18.1530, 7209.18.1560, 7209.18.2510, 7209.18.2520, 7209.18.2580, 7209.18.6020, 7209.18.6090, 7209.25.0000, 7209.26.0000, 7209.27.0000, 7209.28.0000, 7209.90.0000, 7210.70.3000, 7211.23.1500, 7211.23.2000, 7211.23.3000, 7211.23.4500, 7211.23.6030, 7211.23.6060, 7211.23.6090, 7211.29.2030, 7211.29.2090, 7211.29.4500, 7211.29.6030, 7211.29.6080, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7225.50.6000, 7225.50.8080, 7225.99.0090, 7226.92.5000, 7226.92.7050, and 7226.92.8050. The products subject to the investigation may also enter under the following HTSUS numbers: 7210.90.9000, 7212.50.0000, 7215.10.0010, 7215.10.0080, 7215.50.0016, 7215.50.0018, 7215.50.0020, 7215.50.0061, 7215.50.0063, 7215.50.0065, 7215.50.0090, 7215.90.5000, 7217.10.1000, 7217.10.2000, 7217.10.3000, 7217.10.7000, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.19.0000, 7226.19.1000, 7226.19.9000, 7226.99.0180, 7228.50.5015, 7228.50.5040, 7228.50.5070, 7228.60.8000, and 7229.90.1000.

The HTSUS subheadings above are provided for convenience and U.S. Customs purposes only. The written description of the scope of the investigation is dispositive.

Appendix II

List of Topics in the Issues and Decision Memorandum

I. Summary

II. Background

III. Scope of the Investigation

IV. Discussion of the Issues:

Comment 1: Duty Drawback Program

Comment 2: Date of Sale

Comment 3: Quality Characteristics

Comment 4: Advertising Expenses

Comment 5: Overall Cost Reconciliation

Comment 6: Affiliated Raw Material Purchases

Comment 7: General and Administrative Expenses

V. Recommendation

End Supplemental Information

Footnotes

1.  See Certain Cold-Rolled Steel Flat Products From India: Affirmative Preliminary Determination of Sales at Less Than Fair Value and Postponement of Final Determination and Extension of Provisional Measures, 81 FR 11741 (March 7, 2016) (“Preliminary Determination”).

Back to Citation

2.  See Memorandum from Christian Marsh, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, to Paul Piquado, Assistant Secretary for Enforcement and Compliance “Certain Cold-Rolled Steel Flat Products from India: Issues and Decision Memorandum for the Final Determination of Sales at Less-Than-Fair-Value,” dated concurrently with this notice (“Issues and Decision Memorandum”).

Back to Citation

3.  See Memorandum to Christian Marsh, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, “Certain Cold-Rolled Steel Flat Products from Brazil, the People's Republic of China, India, Japan, the Republic of Korea, the Russian Federation, and the United Kingdom: Scope Comments Decision Memorandum for the Preliminary Determination,” dated February 29, 2016 (“Preliminary Scope Decision Memorandum”).

Back to Citation

4.  See Memorandum to Christian Marsh, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, “Certain Cold-Rolled Steel Flat Products from Brazil, the People's Republic of China, India, Japan, the Republic of Korea, the Russian Federation, and the United Kingdom: Final Scope Comments Decision Memorandum,” dated May 16, 2016 (“Final Scope Decision Memorandum”).

Back to Citation

5.  Ball bearing steels are defined as steels which contain, in addition to iron, each of the following elements by weight in the amount specified: (i) Not less than 0.95 nor more than 1.13 percent of carbon; (ii) not less than 0.22 nor more than 0.48 percent of manganese; (iii) none, or not more than 0.03 percent of sulfur; (iv) none, or not more than 0.03 percent of phosphorus; (v) not less than 0.18 nor more than 0.37 percent of silicon; (vi) not less than 1.25 nor more than 1.65 percent of chromium; (vii) none, or not more than 0.28 percent of nickel; (viii) none, or not more than 0.38 percent of copper; and (ix) none, or not more than 0.09 percent of molybdenum.

Back to Citation

6.  Tool steels are defined as steels which contain the following combinations of elements in the quantity by weight respectively indicated: (i) More than 1.2 percent carbon and more than 10.5 percent chromium; or (ii) not less than 0.3 percent carbon and 1.25 percent or more but less than 10.5 percent chromium; or (iii) not less than 0.85 percent carbon and 1 percent to 1.8 percent, inclusive, manganese; or (iv) 0.9 percent to 1.2 percent, inclusive, chromium and 0.9 percent to 1.4 percent, inclusive, molybdenum; or (v) not less than 0.5 percent carbon and not less than 3.5 percent molybdenum; or (vi) not less than 0.5 percent carbon and not less than 5.5 percent tungsten.

Back to Citation

7.  Silico-manganese steel is defined as steels containing by weight: (i) Not more than 0.7 percent of carbon; (ii) 0.5 percent or more but not more than 1.9 percent of manganese, and (iii) 0.6 percent or more but not more than 2.3 percent of silicon.

Back to Citation

8.  Grain-Oriented Electrical Steel From Germany, Japan, and Poland: Final Determinations of Sales at Less Than Fair Value and Certain Final Affirmative Determination of Critical Circumstances, 79 FR 42501, 42503 (July 22, 2014). This determination defines grain-oriented electrical steel as “a flat-rolled alloy steel product containing by weight at least 0.6 percent but not more than 6 percent of silicon, not more than 0.08 percent of carbon, not more than 1.0 percent of aluminum, and no other element in an amount that would give the steel the characteristics of another alloy steel, in coils or in straight lengths.”

Back to Citation

9.  Non-Oriented Electrical Steel From the People's Republic of China, Germany, Japan, the Republic of Korea, Sweden, and Taiwan: Antidumping Duty Orders, 79 FR 71741, 71741-42 (Dec. 3, 2014). The orders define NOES as “cold-rolled, flat-rolled, alloy steel products, whether or not in coils, regardless of width, having an actual thickness of 0.20 mm or more, in which the core loss is substantially equal in any direction of magnetization in the plane of the material. The term `substantially equal' means that the cross grain direction of core loss is no more than 1.5 times the straight grain direction (i.e., the rolling direction) of core loss. NOES has a magnetic permeability that does not exceed 1.65 Tesla when tested at a field of 800 A/m (equivalent to 10 Oersteds) along (i.e., parallel to) the rolling direction of the sheet (i.e., B800 value). NOES contains by weight more than 1.00 percent of silicon but less than 3.5 percent of silicon, not more than 0.08 percent of carbon, and not more than 1.5 percent of aluminum. NOES has a surface oxide coating, to which an insulation coating may be applied.”

Back to Citation

[FR Doc. 2016-17950 Filed 7-28-16; 8:45 am]

BILLING CODE 3510-DS-P