This PDF is the current document as it appeared on Public Inspection on 09/30/2016 at 08:45 am.
Mine Safety and Health Administration, Labor.
Request for public comments.
The Department of Labor, as part of its continuing effort to reduce paperwork and respondent burden, conducts a pre-clearance consultation program to provide the general public and Federal agencies with an opportunity to comment on proposed collections of information in accordance with the Paperwork Reduction Act of 1995, 44 U.S.C. 3506(c)(2)(A). This program helps to assure that requested data can be provided in the desired format, reporting burden (time and financial resources) is minimized, collection instruments are clearly understood, and the impact of collection requirements on respondents can be properly assessed. Currently, the Mine Safety and Health Administration (MSHA) is soliciting comments on the information collection for Slope and Shaft Sinking Plans, 30 CFR 77.1900 (pertains to surface work areas of underground coal mines).
All comments must be received on or before December 2, 2016.
Comments concerning the information collection requirements of this notice may be sent by any of the methods listed below.
- Federal E-Rulemaking Portal: http://www.regulations.gov. Follow the on-line instructions for submitting comments for docket number MSHA-2016-0034.
- Regular Mail: Send comments to USDOL-MSHA, Office of Standards, Regulations, and Variances, 201 12th Street South, Suite 4E401, Arlington, VA 22202-5452.
- Hand Delivery: USDOL-Mine Safety and Health Administration, 201 12th Street South, Suite 4E401, Arlington, VA 22202-5452. Sign in at the receptionist's desk on the 4th floor via the East elevator.
FOR FURTHER INFORMATION CONTACT:
Sheila McConnell, Director, Office of Standards, Regulations, and Variances, MSHA, at MSHA.firstname.lastname@example.org (email); 202-693-9440 (voice); or 202-693-9441 (facsimile).End Further Info End Preamble Start Supplemental Information
Section 103(h) of the Federal Mine Safety and Health Act of 1977 (Mine Act), 30 U.S.C. 813(h), authorizes MSHA to collect information necessary to carry out its duty in protecting the safety and health of miners.
Title 30 CFR 77.1900 requires underground coal mine operators to submit for approval a plan that will provide for the safety of workmen in each slope or shaft that is commenced or extended from the surface to the underground coal mine. Each slope or shaft sinking operation is unique in that each operator uses different methods and equipment and encounters different geological strata which make it impossible for a single set of regulations to ensure the safety of the miners under all circumstances. This makes an individual slope or shaft sinking plan necessary. The plan must be consistent with prudent engineering design. Plans include the name and location of the mine; name and address of the mine operator; a description of the construction work and methods to be used in construction of the slope or shaft, and whether all or part of the work will be performed by a contractor; the elevation, depth and dimensions of the slope or shaft; the location and elevation of the coalbed; the general characteristics of the strata through which the slope or shaft will be developed; the type of equipment which the operator proposes to use; the system of ventilation to be used; and safeguards for the prevention of caving during excavation.
II. Desired Focus of Comments
MSHA is soliciting comments concerning the proposed information collection related to Slope and Shaft Sinking Plans, 30 CFR 77.1900 (pertains to surface work areas of underground coal mines). MSHA is particularly interested in comments that:
- Evaluate whether the collection of information is necessary for the proper performance of the functions of the agency, including whether the information has practical utility;
- Evaluate the accuracy of MSHA's estimate of the burden of the collection of information, including the validity of the methodology and assumptions used;
- Suggest methods to enhance the quality, utility, and clarity of the information to be collected; and
- Minimize the burden of the collection of information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting electronic submission of responses.
The information collection request will be available on http://www.regulations.gov. MSHA cautions the commenter against providing any information in the submission that should not be publicly disclosed. Full comments, including personal information provided, will be made available on www.regulations.gov and www.reginfo.gov.
The public may also examine publicly available documents at USDOL-Mine Safety and Health Administration, 20 12th South, Suite 4E401, Arlington, VA 22202-5452. Sign in at the receptionist's desk on the 4th floor via the East elevator.
Questions about the information collection requirements may be directed to the person listed in the FOR FURTHER INFORMATION section of this notice.
III. Current Actions
This request for collection of information contains provisions for Slope and Shaft Sinking Plans, 30 CFR 77.1900 (pertains to surface work areas Start Printed Page 68065of underground coal mines). MSHA has updated the data with respect to the number of respondents, responses, burden hours, and burden costs supporting this information collection request.
Type of Review: Extension, without change, of a currently approved collection.
Agency: Mine Safety and Health Administration.
OMB Number: 1219-0019.
Affected Public: Business or other for-profit.
Number of Respondents: 27.
Frequency: On occasion.
Number of Responses: 80.
Annual Burden Hours: 1,600 hours.
Annual Respondent or Recordkeeper Cost: $60.
Comments submitted in response to this notice will be summarized and included in the request for Office of Management and Budget approval of the information collection request; they will also become a matter of public record.Start Signature
[FR Doc. 2016-23768 Filed 9-30-16; 8:45 am]
BILLING CODE 4510-43-P