This site displays a prototype of a “Web 2.0” version of the daily
Federal Register. It is not an official legal edition of the Federal
Register, and does not replace the official print version or the official
electronic version on GPO’s govinfo.gov.
The documents posted on this site are XML renditions of published Federal
Register documents. Each document posted on the site includes a link to the
corresponding official PDF file on govinfo.gov. This prototype edition of the
daily Federal Register on FederalRegister.gov will remain an unofficial
informational resource until the Administrative Committee of the Federal
Register (ACFR) issues a regulation granting it official legal status.
For complete information about, and access to, our official publications
and services, go to
About the Federal Register
on NARA's archives.gov.
The OFR/GPO partnership is committed to presenting accurate and reliable
regulatory information on FederalRegister.gov with the objective of
establishing the XML-based Federal Register as an ACFR-sanctioned
publication in the future. While every effort has been made to ensure that
the material on FederalRegister.gov is accurately displayed, consistent with
the official SGML-based PDF version on govinfo.gov, those relying on it for
legal research should verify their results against an official edition of
the Federal Register. Until the ACFR grants it official status, the XML
rendition of the daily Federal Register on FederalRegister.gov does not
provide legal notice to the public or judicial notice to the courts.
Proposed Rule
Enter a search term or FR citation e.g.
88 FR 38230 FR 78782024-13208USDA09/05/24RULE0503-AA39SORN
Choosing an item from
full text search results
will bring you to those results. Pressing enter in the search box
will also bring you to search results.
Choosing an item from
suggestions
will bring you directly to the content.
We must receive comments on this proposed AD by December 19, 2016.
Table of Contents
Enhanced Content - Table of Contents
This table of contents is a navigational tool, processed from the
headings within the legal text of Federal Register documents.
This repetition of headings to form internal navigation links
has no substantive legal effect.
Comments are no longer being accepted.
See DATES for details.
1 comment has
been received at Regulations.gov.
Agencies review all submissions and may choose to redact, or withhold,
certain submissions (or portions thereof). Submitted comments may not be
available to be read until the agency has approved them.
Docket Title
Document ID
Comments
Pilatus PC-6 aileron mass balance counterweight attachment
FederalRegister.gov retrieves relevant information about this document
from Regulations.gov to provide users with additional context. This
information is not part of the official Federal Register document.
Pilatus PC-6 aileron mass balance counterweight attachment
Document page views are updated periodically throughout the day and are
cumulative counts for this document. Counts are subject to sampling,
reprocessing and revision (up or down) throughout the day.
Page views
99
as of
11/06/2026 at 10:15 pm EST
Other Formats
Enhanced Content - Other Formats
This document is also available in the following formats:
This PDF is FR Doc. 2016-26429 as it appeared on Public Inspection on
11/03/2016 at 8:45 am.
If you are using public inspection listings for legal research, you
should verify the contents of the documents against a final, official
edition of the Federal Register. Only official editions of the
Federal Register provide legal notice of publication to the public and judicial notice
to the courts under 44 U.S.C. 1503 & 1507.
Learn more here.
Published Document: 2016-26429 (81 FR 76883)
This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.
AGENCY:
Federal Aviation Administration (FAA), Department of Transportation (DOT).
ACTION:
Notice of proposed rulemaking (NPRM).
SUMMARY:
We propose to adopt a new airworthiness directive (AD) for Pilatus Aircraft Ltd. Models PC-6, PC-6-H1, PC-6-H2, PC-6/350, PC-6/350-H1, PC-6/350-H2, PC-6/A, PC-6/A-H1, PC-6/A-H2, PC-6/B-H2, PC-6/B1-H2, PC- 6/B2-H2, PC-6/B2-H4, PC-6/C-H2, and PC-6/C1-H2 airplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as certain combinations of the aileron counterweight and the attaching parts possibly resulting in reduced thread engagement and leading to disconnection of the aileron counterweight from the aileron. We are issuing this proposed AD to require actions to address the unsafe condition on these products.
DATES:
We must receive comments on this proposed AD by December 19, 2016.
ADDRESSES:
You may send comments by any of the following methods:
Federal eRulemaking Portal:
Go to
http://www.regulations.gov.
Follow the instructions for submitting comments.
Fax:
(202) 493-2251.
Mail:
U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE., Washington, DC 20590.
Hand Delivery:
U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE., Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays.
For service information identified in this proposed AD, contact Pilatus Aircraft Ltd., Customer Technical Support (MCC), P.O. Box 992, CH-6371 Stans, Switzerland; phone: +41 (0)41 619 3333; fax: +41 (0)41 619 7311; email:
supportPC12@pilatus-aircraft.com;
Internet:
http://www.pilatus-aircraft.com.
You may review this referenced service information at the FAA, Small Airplane Directorate, 901 Locust, Kansas City, Missouri 64106. For information on the availability of this material at the FAA, call (816) 329-4148.
Examining the AD Docket
You may examine the AD docket on the Internet at
http://www.regulations.gov
by searching for and locating Docket No. FAA-2016-9357; or in person at the Docket Management Facility between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this proposed AD, the regulatory evaluation, any comments received, and other information. The street address for the Docket Office (telephone (800) 647-5527) is in the
ADDRESSES
section. Comments will be available in the AD docket shortly after receipt.
We invite you to send any written relevant data, views, or arguments about this proposed AD. Send your comments to an address listed under the
ADDRESSES
section. Include “Docket No. FAA-2016-9357; Directorate Identifier 2016-CE-030-AD” at the beginning of your comments. We specifically invite comments on the overall regulatory, economic, environmental, and energy aspects of this proposed AD. We will consider all comments received by the closing date and may amend this proposed AD because of those comments.
We will post all comments we receive, without change, to
http://regulations.gov,
including any personal information you provide. We will also post a report summarizing each substantive verbal contact we receive about this proposed AD.
Discussion
The European Aviation Safety Agency (EASA), which is the Technical Agent for the Member States of the European Community, has issued AD No.: 2016-0183, dated September 13, 2016 (referred to after this as “the MCAI”), to correct an unsafe condition for Pilatus Aircraft Ltd. Model PC-6, PC-6-H1, PC-6-H2, PC-6/350, PC-6/350-H1, PC-6/350-H2, PC-6/A, PC-6/A-H1, PC-6/A-H2, PC-6/B-H2, PC-6/B1-H2, PC- 6/B2-H2, PC-6/B2-H4, PC-6/C-H2, and PC-6/C1-H2 airplanes and was based on mandatory continuing airworthiness information originated by an aviation authority of another country. The MCAI states:
The proper installation of the aileron counterweight requires a combination, peculiar to each aileron, of anchor nut types, bolt types, number of washers, and the definition of the bolt torque. Some combinations of counterweight and attaching parts, which could result in reduced thread engagement, have been reported on a PC-6 aeroplane.
This condition, if not detected and corrected, may lead to a disconnection of the aileron counterweight from the aileron, possibly resulting in reduced control of the aeroplane.
To address this potential unsafe condition, Pilatus issued Service Bulletin (SB) No. 57-006 (hereafter referred to as `the SB' in this AD) to provide inspection instructions.
For the reason described above, this AD requires identification and inspection of the affected aileron mass-balance counterweight attachment parts and, depending on findings, accomplishment of applicable corrective action(s).
You may examine the MCAI on the Internet at
http://www.regulations.gov
by searching for and locating Docket No. FAA-2016-9357.
Pilatus Aircraft Ltd. has issued Pilatus PC-6 Service Bulletin No. 57-006, dated May 13, 2016. The service information describes procedures for removal, installation, and inspection of the ailerons, aileron balance tabs, and the aileron counterweights and their attaching parts. This service information is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the
ADDRESSES
section of this NPRM.
FAA's Determination and Requirements of the Proposed AD
This product has been approved by the aviation authority of another country, and is approved for operation in the United States. Pursuant to our bilateral agreement with this State of Design Authority, they have notified us of the unsafe condition described in the MCAI and service information referenced above. We are proposing this AD because we evaluated all information and determined the unsafe condition exists and is likely to exist or develop on other products of the same type design.
( printed page 76884)
Costs of Compliance
We estimate that this proposed AD will affect 30 products of U.S. registry. We also estimate that it would take about 2 work-hours per product to comply with the basic requirements of this proposed AD. The average labor rate is $85 per work-hour. Required parts would cost about $100 per product.
Based on these figures, we estimate the cost of the proposed AD on U.S. operators to be $8,100, or $270 per product.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. “Subtitle VII: Aviation Programs,” describes in more detail the scope of the Agency's authority.
We are issuing this rulemaking under the authority described in “Subtitle VII, Part A, Subpart III, Section 44701: General requirements.” Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.
Regulatory Findings
We determined that this proposed AD would not have federalism implications under Executive Order 13132. This proposed AD would not have a substantial direct effect on the States, on the relationship between the national Government and the States, or on the distribution of power and responsibilities among the various levels of government.
For the reasons discussed above, I certify this proposed regulation:
(2) Is not a “significant rule” under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979),
(3) Will not affect intrastate aviation in Alaska, and
(4) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.
This AD applies to PILATUS Models PC-6, PC-6-H1, PC-6-H2, PC-6/350, PC-6/350-H1, PC-6/350-H2, PC-6/A, PC-6/A-H1, PC-6/A-H2, PC-6/B-H2, PC-6/B1-H2, PC- 6/B2-H2, PC-6/B2-H4, PC-6/C-H2, and PC-6/C1-H2 airplanes, all manufacturer serial numbers (MSN), including MSN 2001 through 2092 (see Note 1 of paragraph c), certificated in any category.
Note 1 of paragraph (c):
For MSN 2001-2092, these airplanes are also identified as Fairchild Republic Company PC-6 airplanes, Fairchild Industries PC-6 airplanes, Fairchild Heli Porter PC-6 airplanes, or Fairchild-Hiller Corporation PC-6 airplanes.
(d) Subject
Air Transport Association of America (ATA) Code 57: Wings.
(e) Reason
This AD was prompted by certain combinations of the aileron counterweight and the attaching parts possibly resulting in reduced thread engagement and leading to disconnection of the aileron counterweight from the aileron. We are issuing this proposed AD to prevent disconnection of the aileron counterweight from the aileron, which could result in loss of control.
(f) Actions and Compliance
Unless already done, do the following actions as specified in paragraphs (f)(1) and (2) of this AD:
(1) Within the next 12 months after the effective date of this AD or the next time the ailerons or aileron counterweights are removed or installed, whichever occurs first, and thereafter anytime the ailerons or aileron counterweights are removed or installed, remove each aileron counterweight to inspect the type and number of washers required for the installation of a counterweight on each aileron following the accomplishment instructions of paragraphs 3.B.(2) and 3.B.(3) of Pilatus PC-6 Service Bulletin (SB) No. 57-006, dated May 13, 2016.
(2) Before further flight after the inspection required by paragraph (f)(1) of this AD, reinstall each aileron counterweight on the airplane following the accomplishment instructions of paragraph 3.B.(3) of Pilatus PC-6 SB No. 57-006, dated May 13, 2016.
(g) Other FAA AD Provisions
The following provisions also apply to this AD:
(1)
Alternative Methods of Compliance (AMOCs):
The Manager, Standards Office, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. Send information to ATTN: Doug Rudolph, Aerospace Engineer, FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: (816) 329-4059; fax: (816) 329-4090; email:
doug.rudolph@faa.gov.
Before using any approved AMOC on any airplane to which the AMOC applies, notify your appropriate principal inspector (PI) in the FAA Flight Standards District Office (FSDO), or lacking a PI, your local FSDO.
(2)
Airworthy Product:
For any requirement in this AD to obtain corrective actions from a manufacturer or other source, use these actions if they are FAA-approved. Corrective actions are considered FAA-approved if they are approved by the State of Design Authority (or their delegated agent). You are required to assure the product is airworthy before it is returned to service.
(h) Related Information
Refer to MCAI EASA AD No.: 2016-0183, dated September 13, 2016, for related information. You may examine the MCAI on the Internet at
http://www.regulations.gov
by searching for and locating Docket No. FAA-2016-9357. For service information related to this AD, contact Pilatus Aircraft Ltd., Customer Technical Support (MCC), P.O. Box 992, CH-6371 Stans, Switzerland; phone: +41 (0)41 619 3333; fax: +41 (0)41 619 7311; email:
supportPC12@pilatus-aircraft.com;
Internet:
http://www.pilatus-aircraft.com.
You may review this referenced service information at the FAA, Small Airplane Directorate, 901 Locust, Kansas City, Missouri 64106. For information on the availability of this material at the FAA, call (816) 329-4148.
Issued in Kansas City, Missouri, on October 27, 2016.
Pat Mullen,
Acting Manager, Small Airplane Directorate, Aircraft Certification Service.
1 comment has been received at Regulations.gov.
Agencies review all submissions and may choose to redact, or withhold, certain submissions (or portions thereof). Submitted comments may not be available to be read until the agency has approved them.