This PDF is the current document as it appeared on Public Inspection on 11/16/2016 at 08:45 am.
Environmental Protection Agency (EPA).
The Environmental Protection Agency has submitted an information collection request (ICR), “NESHAP for Metal Can Manufacturing Surface Coating (40 CFR part 63, subpart KKKK) (Renewal)” (EPA ICR No. 2079.06, OMB Control No. 2060-0541), to the Office of Management and Budget (OMB) for review and approval in accordance with the Paperwork Reduction Act (44 U.S.C. 3501 et seq.). This is a proposed extension of the ICR, which is currently approved through November 30, 2016. Public comments were previously requested via the Federal Register (81 FR 26546) on May 3, 2016 during a 60-day comment period. This notice allows for an additional 30 days for public comments. A fuller description of the ICR is given below, including its estimated burden and cost to the public. An Agency may neither conduct nor sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB control number.
Additional comments may be submitted on or before December 19, 2016.
Submit your comments, referencing Docket ID Number EPA-HQ-OECA-2013-0345, to: (1) EPA online using www.regulations.gov (our preferred method), or by email to email@example.com, or by mail to: EPA Docket Center, Environmental Protection Agency, Mail Code 28221T, 1200 Pennsylvania Ave. NW., Washington, DC 20460; and (2) OMB via email to firstname.lastname@example.org. Address comments to OMB Desk Officer for EPA.
EPA's policy is that all comments received will be included in the public docket without change, including any personal information provided, unless the comment includes profanity, threats, information claimed to be Confidential Business Information (CBI), or other information whose disclosure is restricted by statute.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Patrick Yellin, Monitoring, Assistance, and Media Programs Division, Office of Compliance, Mail Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460; telephone number: (202) 564-2970; fax number: (202) 564-0050; email address: email@example.com.End Further Info End Preamble Start Supplemental Information
Supporting documents which explain in detail the information that the EPA will be collecting are available in the public docket for this ICR. The docket can be viewed online at www.regulations.gov or in person at the EPA Docket Center, WJC West, Room 3334, 1301 Constitution Ave. NW., Washington, DC. The telephone number for the Docket Center is 202-566-1744. For additional information about EPA's public docket, visit: http://www.epa.gov/dockets.
Abstract: The affected entities are subject to the General Provisions of the NESHAP for Metal Can Manufacturing Surface Coating (40 CFR part 63, subpart A), and any changes, or additions, to the Provisions are specified at 40 CFR part 63, subpart KKKK. Owners or operators of the affected facilities must submit a one-time-only report of any physical or operational changes, initial performance tests, and periodic reports and results. Owners or operators are also required to maintain records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility, or any period during which the monitoring system is inoperative. Reports are required semiannually at a minimum.
Form Numbers: None.
Respondents/affected entities: Metal can manufacturing facilities that use 1,500 gallons or more of surface coatings.
Respondent's obligation to respond: Mandatory (40 CFR part 63, subpart KKKK).
Estimated number of respondents: 5 (total).
Frequency of response: Initially, occasionally and semiannually.
Total estimated burden: 1,940 hours (per year). Burden is defined at 5 CFR 1320.3(b).
Total estimated cost: $206,000 (per year), which includes $6,000 in annualized capital/startup or operation & maintenance costs.
Changes in the Estimates: There is a small adjustment increase of 2 respondent labor hours due to rounding of all total calculated values to three significant digits. The increase is not due to any program change.Start Signature
Director, Regulatory Support Division.
[FR Doc. 2016-27579 Filed 11-16-16; 8:45 am]
BILLING CODE 6560-50-P