This PDF is the current document as it appeared on Public Inspection on 01/05/2017 at 08:45 am.
Enforcement and Compliance, International Trade Administration, Department of Commerce.
On September 7, 2016, the Department of Commerce (the Department) published the preliminary results of the administrative review of the antidumping duty (AD) order on certain hot-rolled carbon steel flat products (hot-rolled steel) from India. We received no comments or requests for a hearing. Therefore, for the final results, we continue to find that Ispat Industries Ltd. (Ispat), JSW Steel Ltd. (JSW), JSW Ispat Steel Ltd. (JSW Ispat), and Tata Steel Ltd. (Tata) had no shipments of the subject merchandise, and, therefore, no reviewable transactions, during the period of review (POR).
Effective January 6, 2017.Start Further Info
FOR FURTHER INFORMATION CONTACT:
George McMahon or Eric Greynolds, AD/CVD Operations Office III, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-1167 and (202) 482-6071, respectively.
On September 7, 2016, the Department published the Preliminary Results. The POR is December 1, 2014, through November 30, 2015. We invited interested parties to comment on the Preliminary Results. We received no comments from any party. The Department conducted this administrative review in accordance with section 751(a)(2) of the Tariff Act of 1930, as amended (the Act).
Scope of the Order
For purposes of this order, the products covered are certain hot-rolled carbon steel flat products of a rectangular shape, of a width of 0.5 inch or greater, neither clad, plated, nor coated with metal and whether or not painted, varnished, or coated with Start Printed Page 1701plastics or other non-metallic substances, in coils (whether or not in successively superimposed layers), regardless of thickness, and in straight lengths of a thickness of less than 4.75 mm and of a width measuring at least 10 times the thickness. Universal mill plate (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm, but not exceeding 1250 mm, and of a thickness of not less than 4.0 mm, not in coils and without patterns in relief) of a thickness not less than 4.0 mm is not included within the scope of this order.
Specifically included in the scope of this order are vacuum-degassed, fully stabilized (commonly referred to as interstitial-free (IF)) steels, high-strength low-alloy (HSLA) steels, and the substrate for motor lamination steels. IF steels are recognized as low-carbon steels with micro-alloying levels of elements such as titanium or niobium (also commonly referred to as columbium), or both, added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, vanadium, and molybdenum. The substrate for motor lamination steels contains micro-alloying levels of elements such as silicon and aluminum.
Steel products included in the scope of this order, regardless of definitions in the Harmonized Tariff Schedule of the United States (HTSUS), are products in which: (i) Iron predominates, by weight, over each of the other contained elements; (ii) the carbon content is 2 percent or less, by weight; and (iii) none of the elements listed below exceeds the quantity, by weight, respectively indicated:
1.80 percent of manganese, or
2.25 percent of silicon, or
1.00 percent of copper, or
0.50 percent of aluminum, or
1.25 percent of chromium, or
0.30 percent of cobalt, or
0.40 percent of lead, or
1.25 percent of nickel, or
0.30 percent of tungsten, or
0.10 percent of molybdenum, or
0.10 percent of niobium, or
0.15 percent of vanadium, or
0.15 percent of zirconium
All products that meet the physical and chemical description provided above are within the scope of this order unless otherwise excluded. The following products, by way of example, are outside or specifically excluded from the scope of this order:
- Alloy hot-rolled carbon steel products in which at least one of the chemical elements exceeds those listed above (including, e.g., American Society for Testing and Materials (ASTM) specifications A543, A387, A514, A517, A506).
- Society of Automotive Engineers (SAE)/American Iron & Steel Institute (AISI) grades of series 2300 and higher.
- Ball bearings steels, as defined in the HTSUS.
- Tool steels, as defined in the HTSUS.
- Silico-manganese (as defined in the HTSUS) or silicon electrical steel with a silicon level exceeding 2.25 percent.
- ASTM specifications A710 and A736.
- United States Steel (USS) Abrasion-resistant steels (USS AR 400, USS AR 500).
- All products (proprietary or otherwise) based on an alloy ASTM specification (sample specifications: ASTM A506, A507).
- Non-rectangular shapes, not in coils, which are the result of having been processed by cutting or stamping and which have assumed the character of articles or products classified outside chapter 72 of the HTSUS.
The merchandise subject to this order is currently classifiable in the HTSUS at subheadings: 7208.10.15.00, 7208.10.30.00, 7208.10.60.00, 7208.25.30.00, 7208.25.60.00, 7208.26.00.30, 7208.26.00.60, 7208.27.00.30, 7208.27.00.60, 7208.36.00.30, 7208.36.00.60, 7208.37.00.30, 7208.37.00.60, 7208.38.00.15, 7208.38.00.30, 7208.38.00.90, 7208.39.00.15, 7208.39.00.30, 7208.39.00.90, 7220.127.116.11, 718.104.22.168, 7208.53.00.00, 7208.54.00.00, 7208.90.00.00, 7211.14.00.90, 7211.19.15.00, 7211.19.20.00, 7211.19.30.00, 7211.19.45.00, 7211.19.60.00, 722.214.171.124, 7126.96.36.199, and 7188.8.131.52. Certain hot-rolled carbon steel covered by this order, including: Vacuum-degassed fully stabilized; high-strength low-alloy; and the substrate for motor lamination steel may also enter under the following tariff numbers: 7225.11.00.00, 7225.19.00.00, 7184.108.40.206, 7225.30.70.00, 7225.40.70.00, 7225.99.00.90, 7226.11.10.00, 7220.127.116.11, 718.104.22.168, 7226.19.10.00, 7226.19.90.00, 7226.91.50.00, 7226.91.70.00, 7226.91.80.00, and 7226.99.00.00. Subject merchandise may also enter under 7210.70.30.00, 7210.90.90.00, 7211.14.00.30, 7212.40.10.00, 7212.40.50.00, and 7212.50.00.00. Although the HTSUS subheadings are provided for convenience and customs purposes, the Department's written description of the merchandise subject to this proceeding is dispositive.
Final Determination of No Shipments
As noted above, the Department received no comments concerning the Preliminary Results on the record of this segment of the proceeding. As there are no changes from, or comments on, the Preliminary Results, the Department finds that there is no reason to modify its analysis. Thus, we continue to find that Ispat, JSW, JSW Ispat, and Tata had no shipments of the subject merchandise, and, therefore, no reviewable transactions, during the POR. Accordingly, no decision memorandum accompanies this Federal Register notice. For further details of the issues addressed in this proceeding, see the Preliminary Results and the accompanying Preliminary Decision Memorandum.
Upon issuance of the final results of this administrative review, the Department shall determine, and Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries, in accordance with section 751(a)(2)(C) of the Act and 19 CFR 351.212. The Department intends to issue assessment instructions to CBP 15 days after publication of the final results of this review.
The Department clarified its “automatic assessment” regulation on May 6, 2003. If applicable, this clarification will apply to all entries of subject merchandise during the POR produced or exported by Ispat, JSW, JSW Ispat, and Tata, for which these companies did not know that its merchandise was destined for the United States. In such instances, we will instruct CBP to liquidate these un-reviewed entries at the all others rate established in the less-than fair-value (LTFV) investigation, as amended, which is 38.72 percent, if there is no Start Printed Page 1702rate for the intermediary company(ies) involved in the transaction. These cash deposit requirements, when imposed, shall remain in effect until further notice.
Cash Deposit Requirements
The following cash deposit requirements will be effective upon publication of the final results of this administrative review for all shipments of subject merchandise entered, or withdrawn from warehouse, for consumption on or after the publication of the final results of this administrative review, as provided by section 751(a)(2) of the Act: (1) The cash deposit rates for respondents noted above, which claimed no shipments, will remain unchanged from the rates assigned to the companies in the most recently completed review of the companies; (2) for merchandise exported by manufacturers or exporters not covered in this administrative review but covered in a prior segment of the proceeding, the cash deposit rate will continue to be the company-specific rate published for the most recently completed segment of this proceeding; (3) if the exporter is not a firm covered in this review, a prior review, or the original investigation, but the manufacturer is, the cash deposit rate will be the rate established for the most recently completed segment of this proceeding for the manufacturer of the subject merchandise; and (4) the cash deposit rate for all other manufacturers or exporters will continue to be 38.72 percent, the all-others rate established in the Amended Final Determination. These cash deposit requirements, when imposed, shall remain in effect until further notice.
Notification to Importers
This notice serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping and/or countervailing duties prior to liquidation of the relevant entries during this POR. Failure to comply with this requirement could result in the Department's presumption that reimbursement of antidumping and/or countervailing duties occurred and the subsequent assessment of doubled antidumping duties.
Administrative Protective Order
This notice also serves as a reminder to parties subject to administrative protective order (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation, which is subject to sanction.
We are issuing and publishing this notice in accordance with sections 751(a)(1) and 777(i)(1) of the Act and 19 CFR 351.213(h).Start Signature
Dated: December 30, 2016.
Assistant Secretary for Enforcement and Compliance.
1. See Certain Hot-Rolled Carbon Steel Flat Products From India: Notice of Preliminary Results of Antidumping Duty Administrative Review; 2014-2015, 81 FR 61664 (September 7, 2016) (Preliminary Results).Back to Citation
2. See Memorandum to Paul Piquado, Assistant Secretary for Enforcement and Compliance, from Christian Marsh, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, titled “Certain Hot-Rolled Carbon Steel Flat Products from India: Decision Memorandum for the Preliminary Results of the Antidumping Duty Administrative Review; 2014-2015,” dated August 19, 2016 (Preliminary Decision Memorandum). The Preliminary Decision Memorandum can be accessed directly at: http://enforcement.trade.gov/frn/index.html.Back to Citation
3. See Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003) (Assessment Policy Notice).Back to Citation
4. See Notice of Amended Final Antidumping Duty Determination of Sales at Less Than Fair Value and Antidumping Duty Order: Certain Hot-Rolled Carbon Steel Flat Products From India, 66 FR 60194 (December 3, 2001) (Amended Final Determination).Back to Citation
5. See Assessment Policy Notice for a full discussion of this clarification.Back to Citation
[FR Doc. 2017-00037 Filed 1-5-17; 8:45 am]
BILLING CODE 3510-DS-P