Food and Drug Administration, HHS.
The Food and Drug Administration (FDA) is announcing that a proposed collection of information has been submitted to the Office of Management and Budget (OMB) for review and clearance under the Paperwork Reduction Act of 1995.
Fax written comments on the collection of information by April 14, 2017.
To ensure that comments on the information collection are received, OMB recommends that written comments be faxed to the Office of Information and Regulatory Affairs, OMB, Attn: FDA Desk Officer, FAX: (202) 395-7285, or emailed to firstname.lastname@example.org. All comments should be identified with the OMB control number 0910-0553. Also include the FDA docket number found in brackets in the heading of this document.
Start Further Info
FOR FURTHER INFORMATION CONTACT:
FDA PRA Staff, Office of Operations, Food and Drug Administration, Three White Flint North 10A-12M, 11601 Landsdown St., North Bethesda, MD 20852, PRAStaff@fda.hhs.gov.
End Further Info
Start Supplemental Information
In compliance with 44 U.S.C. 3507, FDA has submitted the following proposed collection of information to OMB for review and clearance.
Recommended Glossary and Educational Outreach To Support Use of Symbols on Labels and in Labeling of In Vitro Diagnostic Devices Intended for Professional Use
OMB Control Number 0910-0553—Extension
Section 502 of the Federal Food, Drug, and Cosmetic Act (the FD&C Act) (21 U.S.C. 352), among other things, establishes requirements for the label or labeling of a medical device to avoid misbranding. Section 351 of the Public Health Service Act (the PHS Act) (42 U.S.C. 262) establishes requirements that manufacturers of biological products must submit a license application for FDA review and approval prior to marketing a biological product for introduction into interstate commerce.Start Printed Page 13814
In the Federal Register of November 30, 2004 (69 FR 69606), FDA published a notice of availability of the guidance entitled “Use of Symbols on Labels and in Labeling of In Vitro Diagnostic Devices Intended for Professional Use.” The document provides guidance for the voluntary use of selected symbols in place of text in labeling. It provides the labeling guidance required for: (1) In vitro diagnostic devices (IVDs), intended for professional use under 21 CFR 809.10, FDA's labeling requirements for IVDs; and (2) FDA's labeling requirements for biologics, including IVDs under 21 CFR parts 610 and 660.
The guidance document recommends that a glossary of terms accompany each IVD to define the symbols used on that device's labels and/or labeling. Furthermore, the guidance recommends an educational outreach effort to enhance the understanding of newly introduced symbols. Both the glossary and educational outreach information help to ensure that IVD users have enough general familiarity with the symbols used, as well as provide a quick reference for available materials, thereby further ensuring that such labeling satisfies the labeling requirements under section 502(c) of the FD&C Act and section 351 of the PHS Act.
The likely respondents for this collection of information are IVD manufacturers who plan to use the selected symbols in place of text on the labels and/or labeling of their IVDs.
The glossary activity is inclusive of both domestic and foreign IVD manufacturers. FDA receives submissions from approximately 689 IVD manufacturers annually. The 4-hour estimate for a glossary is based on the average time necessary for a manufacturer to modify the glossary for the specific symbols used in labels or labeling for the IVDs manufactured.
In the Federal Register of December 5, 2016 (81 FR 87570), FDA published a 60-day notice requesting public comment on the proposed collection of information. No comments were received.
FDA estimates the burden of this collection of information as follows:
Table 1—Estimated Annual Third-Party Disclosure Burden 1
|Activity||Number of respondents||Number of disclosures
respondent||Total annual disclosures||Average burden per
|1 There are no capital costs or operating and maintenance costs associated with this collection of information.|
End Supplemental Information
Dated: March 9, 2017.
Associate Commissioner for Policy.
[FR Doc. 2017-05106 Filed 3-14-17; 8:45 am]
BILLING CODE 4164-01-P