Skip to Content

Notice

Accreditation and Approval of Camin Cargo Control, Inc., as a Commercial Gauger and Laboratory

Document Details

Information about this document as published in the Federal Register.

Enhanced Content

Relevant information about this document from Regulations.gov provides additional context. This information is not part of the official Federal Register document.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

U.S. Customs and Border Protection, Department of Homeland Security.

ACTION:

Notice of accreditation and approval of Camin Cargo Control, Inc., as a commercial gauger and laboratory.

SUMMARY:

Notice is hereby given, pursuant to CBP regulations, that Camin Cargo Control, Inc., has been approved to gauge and accredited to test petroleum and certain petroleum products for customs purposes for the next three years as of May 26, 2016.

DATES:

The accreditation and approval of Camin Cargo Control, Inc., as commercial gauger and laboratory became effective on May 26, 2016. The next triennial inspection date will be scheduled for May 2019.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Approved Gauger and Accredited Laboratories Manager, Laboratories and Scientific Services Directorate, U.S. Customs and Border Protection, 1300 Pennsylvania Avenue NW., Suite 1500N, Washington, DC 20229, tel. 202-344-1060.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

Notice is hereby given pursuant to 19 CFR 151.12 and 19 CFR 151.13, that Camin Cargo Control, Inc., 31 Fulton St. Unit A, New Haven, CT 06513, has been approved to gauge and accredited to test petroleum and certain petroleum products for customs purposes, in accordance with the provisions of 19 CFR 151.12 and 19 CFR 151.13. Camin Cargo Control, Inc., is approved for the following gauging procedures for petroleum and certain petroleum products set forth by the American Petroleum Institute (API):

API chaptersTitle
1Vocabulary.
3Tank gauging.
7Temperature Determination.
8Sampling.
11Physical Properties Data.
12Calculations.
17Maritime Measurements.

Camin Cargo Control, Inc., is accredited for the following laboratory analysis procedures and methods for petroleum and certain petroleum products set forth by the U.S. Customs and Border Protection Laboratory Methods (CBPL) and American Society for Testing and Materials (ASTM):

CBPL No.ASTMTitle
27-01D287Standard Test Method for API Gravity of crude Petroleum and Petroleum Products
27-08D86Standard Test Method for Distillation of Petroleum Products
27-11D445Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids
27-13D4294Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-ray Fluorescence Spectrometry
27-20D4057Standard Practice for Manual Sampling of Petroleum and Petroleum Products
27-48D4052Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
27-50D93Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
Start Printed Page 14374
27-53D2709Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
27-54D1796Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method
27-58D5191Standard Test Method For Vapor Pressure of Petroleum Products (Mini Method)
N/AD97Standard Test Method for Pour Point of Petroleum Products
N/AD130Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
N/AD482Standard Test Method for Ash from Petroleum Products
N/AD524Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
N/AD1319Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
N/AD2500Standard Test Method for Cloud Point of Petroleum Products
N/AD2624Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
N/AD3606Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
N/AD4815Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
N/AD5453Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

Anyone wishing to employ this entity to conduct laboratory analyses and gauger services should request and receive written assurances from the entity that it is accredited or approved by the U.S. Customs and Border Protection to conduct the specific test or gauger service requested. Alternatively, inquiries regarding the specific test or gauger service this entity is accredited or approved to perform may be directed to the U.S. Customs and Border Protection by calling (202) 344-1060. The inquiry may also be sent to cbp.labhq@dhs.gov. Please reference the Web site listed below for the current CBP Approved Gaugers and Accredited Laboratories List. http://www.cbp.gov/​about/​labs-scientific/​commercial-gaugers-and-laboratories.

Start Signature

Dated: March 14, 2017.

Ira S. Reese,

Executive Director, Laboratories and Scientific Services Directorate.

End Signature End Supplemental Information

[FR Doc. 2017-05458 Filed 3-17-17; 8:45 am]

BILLING CODE 9111-14-P