Skip to Content

Notice

Accreditation and Approval of Camin Cargo Control, Inc., as a Commercial Gauger and Laboratory

Document Details

Information about this document as published in the Federal Register.

Enhanced Content

Relevant information about this document from Regulations.gov provides additional context. This information is not part of the official Federal Register document.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

U.S. Customs and Border Protection, Department of Homeland Security.

ACTION:

Notice of accreditation and approval of Camin Cargo Control, Inc., as a commercial gauger and laboratory.

SUMMARY:

Notice is hereby given, pursuant to CBP regulations, that Camin Cargo Control, Inc., has been approved to gauge and accredited to test petroleum and certain petroleum products for customs purposes for the next three years as of September 28, 2016.

DATES:

The accreditation and approval of Camin Cargo Control, Inc., as commercial gauger and laboratory became effective on September 28, 2016. The next triennial inspection date will be scheduled for September 2019.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Mr. Stephen Cassata, Laboratories and Scientific Services Directorate, U.S. Customs and Border Protection, 1300 Pennsylvania Avenue NW., Suite 1500N, Washington, DC 20229, tel. 202-344-1060.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

Notice is hereby given pursuant to 19 CFR 151.12 and 19 CFR 151.13, that Camin Cargo Control, Inc., 2304 East Burton Street, Sulphur, LA 70663, has been approved to gauge and accredited to test petroleum and certain petroleum products for customs purposes, in accordance with the provisions of 19 CFR 151.12 and 19 CFR 151.13. Camin Cargo Control, Inc., is approved for the following gauging procedures for petroleum and certain petroleum products set forth by the American Petroleum Institute (API):

API ChaptersTitle
3Tank Gauging.
7Temperature Determination.
8Sampling.
11Physical Property.
12Calculations.
17Maritime Measurements.

Camin Cargo Control, Inc., is accredited for the following laboratory analysis procedures and methods for petroleum and certain petroleum products set forth by the U.S. Customs and Border Protection Laboratory Methods (CBPL) and American Society for Testing and Materials (ASTM):

CBPL No.MethodTitle
27-01ASTM D287Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method).
27-02ASTM D1298Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method.
27-03ASTM D4006Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method.
27-04ASTM D95Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation.
27-05ASTM D4928Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration.
27-06ASTM D473Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method.
27-08ASTM D86Standard Test Method for Distillation of Petroleum Products.
27-11ASTM D445Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids.
27-13ASTM D4294Standard test method for sulfur in petroleum and petroleum products by energy-dispersive x-ray fluorescence spectrometry.
27-14ASTM D2622Standard Test Method for Sulfur in Petroleum Products (X-Ray Spectrographic Methods).
27-46ASTM D5002Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer.
27-48ASTM D4052Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter.
27-50ASTM D93Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester.
27-53ASTM D2709Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge.
27-57ASTM D7039Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-Ray Fluorescence Spectrometry.
Start Printed Page 28503
27-58ASTM D5191Standard Test Method For Vapor Pressure of Petroleum Products (Mini Method).

Anyone wishing to employ this entity to conduct laboratory analyses and gauger services should request and receive written assurances from the entity that it is accredited or approved by the U.S. Customs and Border Protection to conduct the specific test or gauger service requested. Alternatively, inquiries regarding the specific test or gauger service this entity is accredited or approved to perform may be directed to the U.S. Customs and Border Protection by calling (202) 344-1060. The inquiry may also be sent to cbp.labhq@dhs.gov. Please reference the Web site listed below for the current CBP Approved Gaugers and Accredited Laboratories List. http://www.cbp.gov/​about/​labs-scientific/​commercial-gaugers-and-laboratories.

Start Signature

Dated: June 13, 2017.

Ira S. Reese,

Executive Director, Laboratories and Scientific Services Directorate.

End Signature End Supplemental Information

[FR Doc. 2017-13014 Filed 6-21-17; 8:45 am]

BILLING CODE 9111-14-P