Skip to Content


Certain Cut-to-Length Carbon-Quality Steel Plate Products From the Republic of Korea: Final Results of Antidumping Duty Administrative Review; 2016-2017

Document Details

Information about this document as published in the Federal Register.

Document Statistics
Document page views are updated periodically throughout the day and are cumulative counts for this document including its time on Public Inspection. Counts are subject to sampling, reprocessing and revision (up or down) throughout the day.
Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble


Enforcement and Compliance, International Trade Administration, Department of Commerce.


The Department of Commerce (Commerce) determines that certain companies covered by this administrative review made sales of certain cut-to-length carbon-quality steel plate products (CTL plate) from the Republic of Korea (Korea) at less than normal value during the period of review (POR) February 1, 2016, through January 31, 2017.


Applicable July 13, 2018.

Start Further Info


Yang Jin Chun or Thomas Schauer, AD/CVD Operations, Office I, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-5760 or (202) 482-0410, respectively.

End Further Info End Preamble Start Supplemental Information



On March 12, 2018, Commerce published the Preliminary Results of the administrative review.[1] We invited interested parties to comment on the Preliminary Results. We received a case brief from Hyundai Steel Company, and a rebuttal brief from Nucor Corporation. This review covers two respondents, Dongkuk Steel Mill Co., Ltd. (DSM) and Hyundai Steel Company (Hyundai Steel).

Commerce conducted this review in accordance with section 751 of the Tariff Act of 1930, as amended (the Act).

Scope of the Order

The products covered by the antidumping duty order are certain CTL plate. Imports of CTL plate are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under subheadings 7208.40.30.30, 7208.40.30.60, 7208.51.00.30, 7208.51.00.45, 7208.51.00.60, 7208.52.00.00, 7208.53.00.00, 7208.90.00.00, 7210.70.30.00, 7210.90.90.00, 7211.13.00.00, 7211.14.00.30, 7211.14.00.45, 7211.90.00.00, 7212.40.10.00, 7212.40.50.00, 7212.50.00.00, 7225.40.30.50, 7225.40.70.00, 7225.50.60.00, 7225.99.00.90, 7226.91.50.00, 7226.91.70.00, 7226.91.80.00, and 7226.99.00.00. While the HTSUS subheadings are provided for convenience and customs purposes, the written description is dispositive. A full description of the scope of the order is contained in the Issues and Decision Memorandum.[2]

Analysis of Comments Received

The sole issue raised by parties in this review, pertaining to the home market date of sale, is addressed in the Issues and Decision Memorandum, which is hereby adopted by this notice. The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at and to all parties in the Central Records Unit, Room B-8024 of the main Department of Commerce building. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at​frn/​index.html.

Changes Since the Preliminary Results

Based on our analysis of comments received, we made no changes to the margins for the final results of this review.

Final Results of the Administrative Review

We determine that the following weighted-average dumping margins exist for the respondents for the period February 1, 2016, through January 31, 2017.

Producer/exporterWeighted- average dumping margin (percent)
Dongkuk Steel Mill Co., Ltd0.90
Hyundai Steel Company11.64

Assessment Rates

Pursuant to section 751(a)(2)(A) of the Act and 19 CFR 351.212(b)(1), Start Printed Page 32630Commerce will determine, and CBP shall assess, antidumping duties on all appropriate entries of subject merchandise in accordance with the final results of this review.

For DSM and Hyundai Steel, we calculated importer-specific assessment rates on the basis of the ratio of the total amount of antidumping duties calculated for each importer's examined sales and the total entered value of the sales in accordance with 19 CFR 351.212(b)(1).[3] For entries of subject merchandise during the period of review produced by DSM or Hyundai Steel for which it did not know its merchandise was destined for the United States, we will instruct CBP to liquidate unreviewed entries at the all-others rate if there is no rate for the intermediate company(ies) involved in the transaction. We intend to issue liquidation instructions to CBP 15 days after publication of the final results of these reviews.

Cash Deposit Requirements

The following deposit requirements will be effective upon publication of this notice for all shipments of CTL plate from Korea entered, or withdrawn from warehouse, for consumption on or after the date of publication, as provided by section 751(a)(2)(C) of the Act: (1) The cash deposit rate for the companies listed above will be equal to the weighted-average dumping margins established in the final results of this administrative review; (2) for merchandise exported by producers or exporters not covered in this review but covered in a prior completed segment of the proceeding, the cash deposit rate will continue to be the company-specific rate published for the most recent period; (3) if the exporter is not a firm covered in this review, a prior review, or the original investigation but the producer has been covered in a prior complete segment of this proceeding, the cash deposit rate will be the rate established for the most recent period for the producer of the merchandise; (4) the cash deposit rate for all other manufacturers or exporters will continue to be 0.98 percent,[4] the all-others rate determined in the less-than-fair-value investigation, adjusted for the export-subsidy rate in the companion countervailing duty investigation. These cash deposit requirements, when imposed, shall remain in effect until further notice.

Notification to Importers

This notice serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Secretary's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties.

Notification Regarding Administrative Protective Orders

This notice also serves as a reminder to parties subject to administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely written notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a violation subject to sanction.

This notice is published in accordance with sections 751(a)(1) and 777(i)(1) of the Act and 19 CFR 351.221(b)(5).

Start Signature

Dated: July 9, 2018.

Gary Taverman,

Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, performing the non-exclusive duties and functions of the Assistant Secretary for Enforcement and Compliance.

End Signature


List of Topics Discussed in the Issues and Decision Memorandum



Scope of the Order

Discussion of the Issue

Comment: Home Market Date of Sale

End Supplemental Information


1.  See Certain Cut-to-Length Carbon-Quality Steel Plate Products from the Republic of Korea: Preliminary Results of Antidumping Duty Administrative Review; 2016-2017, 83 FR 10670 (March 12, 2018) (Preliminary Results).

Back to Citation

2.  See the Memorandum, “Issues and Decision Memorandum for the Final Results of Antidumping Duty Administrative Review of Certain Cut-to-Length Carbon-Quality Steel Plate Products from the Republic of Korea; 2015-2016,” dated concurrently with and hereby adopted by this notice (Issues and Decision Memorandum).

Back to Citation

3.  In these final results, Commerce applied the assessment rate calculation method adopted in Antidumping Proceedings: Calculation of the Weighted-Average Dumping Margin and Assessment Rate in Certain Antidumping Duty Proceedings; Final Modification, 77 FR 8101 (February 14, 2012).

Back to Citation

4.  See, e.g., Certain Cut-to-Length Carbon-Quality Steel Plate Products from the Republic of Korea: Final Results of Antidumping Duty Administrative Review and New Shipper Review; 2014-2015, 81 FR 62712, 62714 (September 12, 2016).

Back to Citation

[FR Doc. 2018-15018 Filed 7-12-18; 8:45 am]