This site displays a prototype of a “Web 2.0” version of the daily
Federal Register. It is not an official legal edition of the Federal
Register, and does not replace the official print version or the official
electronic version on GPO’s govinfo.gov.
The documents posted on this site are XML renditions of published Federal
Register documents. Each document posted on the site includes a link to the
corresponding official PDF file on govinfo.gov. This prototype edition of the
daily Federal Register on FederalRegister.gov will remain an unofficial
informational resource until the Administrative Committee of the Federal
Register (ACFR) issues a regulation granting it official legal status.
For complete information about, and access to, our official publications
and services, go to
About the Federal Register
on NARA's archives.gov.
The OFR/GPO partnership is committed to presenting accurate and reliable
regulatory information on FederalRegister.gov with the objective of
establishing the XML-based Federal Register as an ACFR-sanctioned
publication in the future. While every effort has been made to ensure that
the material on FederalRegister.gov is accurately displayed, consistent with
the official SGML-based PDF version on govinfo.gov, those relying on it for
legal research should verify their results against an official edition of
the Federal Register. Until the ACFR grants it official status, the XML
rendition of the daily Federal Register on FederalRegister.gov does not
provide legal notice to the public or judicial notice to the courts.
Proposed Rule
Enter a search term or FR citation e.g.
88 FR 38230 FR 78782024-13208USDA09/05/24RULE0503-AA39SORN
Choosing an item from
full text search results
will bring you to those results. Pressing enter in the search box
will also bring you to search results.
Choosing an item from
suggestions
will bring you directly to the content.
The NPRM "Federal Motor Vehicle Safety Standards; Motor Vehicles Brake Fluids," RIN 2027-AK58, published February 3, 2010 (75 FR 5553), is withdrawn as of December 26, 2018.
Table of Contents
Enhanced Content - Table of Contents
This table of contents is a navigational tool, processed from the
headings within the legal text of Federal Register documents.
This repetition of headings to form internal navigation links
has no substantive legal effect.
Document page views are updated periodically throughout the day and are
cumulative counts for this document. Counts are subject to sampling,
reprocessing and revision (up or down) throughout the day.
Page views
728
as of
11/10/2026 at 4:15 pm EST
Other Formats
Enhanced Content - Other Formats
This document is also available in the following formats:
This PDF is FR Doc. 2018-27796 as it appeared on Public Inspection on
12/21/2018 at 8:45 am.
If you are using public inspection listings for legal research, you
should verify the contents of the documents against a final, official
edition of the Federal Register. Only official editions of the
Federal Register provide legal notice of publication to the public and judicial notice
to the courts under 44 U.S.C. 1503 & 1507.
Learn more here.
Published Document: 2018-27796 (83 FR 66228)
This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.
AGENCY:
National Highway Traffic Safety Administration (NHTSA), Department of Transportation (DOT).
ACTION:
Proposed rule; withdrawal.
SUMMARY:
NHTSA withdraws its notice of proposed rulemaking (NPRM), published on February 3, 2010, proposing amendments to the Federal Motor Vehicle Safety Standard (FMVSS) No. 116, Motor Vehicle Brake Fluids. Since publication of the NPRM and after review of the comments, the agency has determined that updates and corrections outside the scope of the notice are necessary in order to publish a final rule. Based on this, the agency has decided to withdraw the proposal to amend FMVSS No. 116.
DATES:
The NPRM “Federal Motor Vehicle Safety Standards; Motor Vehicles Brake Fluids,” RIN 2027-AK58, published February 3, 2010 (75 FR 5553), is withdrawn as of December 26, 2018.
ADDRESSES:
Electronic Access:
You can view and download related documents and public comments by going to the website
https://www.regulations.gov.
Enter the docket number NHTSA-2010-0012 in the search field.
FOR FURTHER INFORMATION CONTACT:
Joshua Fikentscher, Office of Crash Avoidance Standards (Phone: 202-366-1810; Fax: 202-493-0073) or Sara R. Bennett, Office of the Chief Counsel (Phone: 202-366-2992; Fax: 202-366-3820). You may send mail to both of these officials at the National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590.
SUPPLEMENTARY INFORMATION:
Background
Federal Motor Vehicle Safety Standard (FMVSS) No. 116, “Motor Vehicle Brake Fluids,” specifies
( printed page 66229)
requirements for fluids for use in hydraulic brake systems of motor vehicle, containers for these fluids, and labeling of the containers. The purpose of this standard is to reduce failures, which may occur because of the manufacture or use of improper or contaminated fluid, in the hydraulic braking systems of motor vehicles. This standard applies to all fluid for use in hydraulic brake systems of motor vehicles.
The NPRM
On February 3, 2010, NHTSA published a Notice of Proposed Rulemaking (NPRM) proposing to amend FMVSS No. 116 to include tests to measure the impact of brake fluid on ethylene, propylene, and diene terpolymer (EPDM) rubber, update references to industry standards, and correct minor errors in the standard.[1]
The supporting rationale for the proposed EPDM testing amendment was that the motor vehicle industry had shifted over the last two decades from using styrene-butadiene rubber (SBR), which is currently covered by FMVSS No. 116, to EPDM rubber. The proposed rule informed the public about the agency's proposal to amend the standard by: (1) Adding the testing of a terpolymer of ethylene, propylene, and diene (EPDM) rubber to the corrosion test and the temperature sensitivity test; (2) updating the Society of Automotive Engineers International (SAE) and American Society for Testing and Materials (ASTM) references; and (3) correcting minor errors.
Comments Received
NHTSA received comments on the 2010 NPRM from three manufacturers of brake fluid/components, an international standards organization, and an individual. Two of the manufacturers mentioned that the Compatibility Fluid, RM-66-05, was no longer available, and had been replaced by RM-66-06 or ISO 4926 fluid. All three manufacturers suggested changes to a performance test that was unmentioned in the agency's proposal. The international standards organization suggested changes that reflected more recent SAE standards. The individual opposed the incorporation of industry standards into Federal regulations and suggested additional performance tests.
Reason for Withdrawal
Although the agency proposal in 2010 provided amendments to add EPDM rubber to the standard and update the references to industry standards, further research and studies are necessary to develop a proposed upgrade to FMVSS No. 116 that would effectively provide minimum performance requirements for the type of EPDM rubber currently available. The rubber formulations included in recent updates to industry standards have changed, and the blends referenced in the NPRM include ingredients that are no longer available.
In addition to changes to the SBR and EPDM rubber formulations, the agency determined other corrections are necessary that were not included in the NPRM. One such correction brought up by commenters is the reference to the Compatibility Fluid, RM-66-05, which had been replaced by the RM-66-06 fluid. Another correction needed is the hardness test procedure for the EPDM rubber, which had been inadvertently omitted from the proposed performance tests in the NPRM. Finally, NHTSA notes SAE International and the ASTM have updated several of the industry standards and tests referenced in the NPRM since the publication of the notice in 2010.
Since publication of the NPRM and after review of the comments, the agency has determined that updates and corrections outside the scope of the notice are necessary in order to publish a final rule, and additional research and data analyses are needed. Accordingly, NHTSA has determined that the proposed updates in the 2010 NPRM to FMVSS No. 116 should not be adopted at this time and is withdrawing the NPRM.
Issued in Washington, DC, under authority delegated in 49 CFR 1.95 and 501.5.