Occupational Safety and Health Administration (OSHA), Labor.
In this notice, OSHA announces the application of Curtis-Straus LLC for expansion of recognition as a Nationally Recognized Testing Laboratory (NRTL) and presents the agency's preliminary finding to grant the application.
Submit comments, information, and documents in response to this notice, or requests for an extension of time to make a submission, on or before January 10, 2019.
Submit comments by any of the following methods:
Electronically: You may submit comments and attachments electronically at: https://www.regulations.gov, which is the Federal eRulemaking Portal. Follow the instructions online for submitting comments.
Facsimile: If your comments, including attachments, are not longer than 10 pages, you may fax them to the OSHA Docket Office at (202) 693-1648.
Mail, hand delivery, express mail, messenger, or courier service: When using this method, you must submit a copy of your comments and attachments to the OSHA Docket Office, Docket No. OSHA-2009-0026, Occupational Safety and Health Administration, U.S. Department of Labor, Room N-3653, 200 Constitution Avenue NW, Washington, DC 20210. Deliveries (hand, express mail, messenger, and courier service) are accepted during the Docket Office's normal business hours, 10:00 a.m. to 3:00 p.m., ET.
Instructions: All submissions must include the agency name and OSHA docket number (OSHA-2009-0026). All comments, including any personal information you provide, are placed in the public docket without change, and may be made available online at https://www.regulations.gov. For further information on submitting comments, see the “Public Participation” heading in the section of this notice titled SUPPLEMENTARY INFORMATION.
Docket: To read or download comments or other material in the docket, go to https://www.regulations.gov or the OSHA Docket Office at the above address. All documents in the docket (including this Federal Register notice) are listed in the https://www.regulations.gov index; however, some information (e.g., copyrighted material) is not publicly available to read or download through the website. All submissions, including copyrighted material, are available for inspection at the OSHA Docket Office.
Extension of comment period: Submit requests for an extension of the comment period on or before January 10, 2019 to the Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, U.S. Department of Labor, 200 Constitution Avenue NW, Room N-3653, Washington, DC 20210, or by fax to (202) 693-1644.
Start Further Info
FOR FURTHER INFORMATION CONTACT:
Information regarding this notice is available from the following sources:
Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office of Communications, U.S. Department of Labor, telephone: (202) 693-1999; email: email@example.com.
General and technical information: Contact Mr. Kevin Robinson, Director, Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, U.S. Department of Labor, phone: (202) 693-2110 or email: firstname.lastname@example.org.
End Further Info
Start Supplemental Information
I. Notice of the Application for Expansion
OSHA is providing notice that Curtis-Straus LLC (CSL), is applying for expansion of recognition as a NRTL. CSL requests the addition of one test standard to the NRTL scope of recognition.
OSHA recognition of a NRTL signifies that the organization meets the requirements specified in 29 CFR 1910.7. Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within the scope of recognition. Each NRTL's scope of recognition includes (1) the type of products the NRTL may test, with each type specified by the applicable test standard; and (2) the recognized site(s) that has/have the technical capability to perform the product-testing and product-certification activities for test standards within the NRTL's scope. Recognition is not a delegation or grant of government authority; however, recognition enables employers to use products approved by the NRTL to meet OSHA standards that require product testing and certification.
The agency processes applications by a NRTL for initial recognition and for an expansion or renewal of this recognition, following requirements in Appendix A to 29 CFR 1910.7. This appendix requires that the agency publish two notices in the Federal Register in processing an application. In the first notice, OSHA announces the application and provides a preliminary finding. In the second notice, the agency provides the final decision on the application. These notices set forth the NRTL's scope of recognition or modifications of that scope. OSHA maintains an informational web page for each NRTL, including CSL, which details the NRTL's scope of recognition. These pages are available from the OSHA website at http://www.osha.gov/dts/otpca/nrtl/index.html.
CSL currently has one facility (site) recognized by OSHA for product testing and certification, with headquarters located at: Curtis-Straus LLC, One Distribution Circle, Suite #1, Littleton, MA 01460. A complete list of CSL's scope of recognition is available at https://www.osha.gov/dts/otpca/nrtl/csl.html.
II. General Background on the Application
CSL submitted an application, dated January 2, 2018 (OSHA-2009-0026-0079), to expand recognition to include one additional test standard. OSHA staff Start Printed Page 66312performed a detailed analysis of the application packet and reviewed other pertinent information. OSHA did not perform any on-site reviews in relation to this application.
Table 1 lists the appropriate test standard found in CSL's application to expand for testing and certification of products under the NRTL Program.
Table 1—Proposed List Appropriate Test Standard for Inclusion in CSL's NRTL Scope of Recognition
|Test standard||Test standard title|
|UL 962||Household and Commercial Furnishings.|
III. Preliminary Findings on the Application
CSL submitted an acceptable application for expansion of the scope of recognition. OSHA's review of the application file, and pertinent documentation, indicates CSL can meet the requirements prescribed by 29 CFR 1910.7 for expanding recognition to include the addition of this one test standard for NRTL testing and certification listed above. This preliminary finding does not constitute an interim or temporary approval of CSL's application.
OSHA welcomes public comment as to whether CSL meets the requirements of 29 CFR 1910.7 for expansion of recognition as a NRTL. Comments should consist of pertinent written documents and exhibits. Commenters needing more time to comment must submit a request in writing, stating the reasons for the request. Commenters must submit the written request for an extension by the due date for comments. OSHA will limit any extension to 10 days unless the requester justifies a longer period. OSHA may deny a request for an extension if the request is not adequately justified. To obtain or review copies of the exhibits identified in this notice, as well as comments submitted to the docket, contact the Docket Office, Room N-2625, Occupational Safety and Health Administration, U.S. Department of Labor, at the above address. These materials also are available online at http://www.regulations.gov under Docket No. OSHA-2009-0026.
OSHA staff will review all comments to the docket submitted in a timely manner. After addressing the issues raised by these comments, the agency will make a recommendation to the Assistant Secretary for Occupational Safety and Health whether to grant CSL's application for expansion of the scope of recognition. The Assistant Secretary will make the final decision on granting the application. In making this decision, the Assistant Secretary may undertake other proceedings prescribed in Appendix A to 29 CFR 1910.7.
OSHA will publish a public notice of its final decision in the Federal Register.
IV. Authority and Signature
Loren Sweatt, Deputy Assistant Secretary of Labor for Occupational Safety and Health, authorized the preparation of this notice. Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C. 657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25, 2012), and 29 CFR 1910.7.
End Supplemental Information
Signed at Washington, DC, on December 18, 2018.
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2018-27856 Filed 12-21-18; 8:45 am]
BILLING CODE 4510-26-P