Skip to Content

Notice

Accreditation and Approval of Intertek USA, Inc. (Texas City, TX) as a Commercial Gauger and Laboratory

Document Details

Information about this document as published in the Federal Register.

Document Statistics
Document page views are updated periodically throughout the day and are cumulative counts for this document including its time on Public Inspection. Counts are subject to sampling, reprocessing and revision (up or down) throughout the day.
Enhanced Content

Relevant information about this document from Regulations.gov provides additional context. This information is not part of the official Federal Register document.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

U.S. Customs and Border Protection, Department of Homeland Security.

ACTION:

Notice of accreditation and approval of Intertek USA, Inc. (Texas City, TX), as a commercial gauger and laboratory.

SUMMARY:

Notice is hereby given, pursuant to CBP regulations, that Intertek USA, Inc. (Texas City, TX), has been approved to gauge petroleum and certain petroleum products and accredited to test petroleum and certain petroleum products for customs purposes for the next three years as of February 28, 2018.

DATES:

Intertek USA, Inc. (Texas City, TX) was approved and accredited as a commercial gauger and laboratory as of February 28, 2018. The next triennial inspection date will be scheduled for February 2021.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Melanie A. Glass, Laboratories and Scientific Services, U.S. Customs and Border Protection, 1300 Pennsylvania Avenue NW, Suite 1500N, Washington, DC 20229, tel. 202-344-1060.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

Notice is hereby given pursuant to 19 CFR 151.12 and 19 CFR 151.13, that Intertek USA, Inc., 728 4th Avenue South, Texas City, TX 77590, has been approved to gauge petroleum and certain petroleum products and accredited to test petroleum and certain petroleum Start Printed Page 1485products for customs purposes, in accordance with the provisions of 19 CFR 151.12 and 19 CFR 151.13.

Intertek USA, Inc. (Texas City, TX) is approved for the following gauging procedures for petroleum and certain petroleum products from the American Petroleum Institute (API):

API chaptersTitle
3Tank gauging.
7Temperature determination.
8Sampling.
12Calculations.
17Maritime measurement.

Intertek USA, Inc. (Texas City, TX) is accredited for the following laboratory analysis procedures and methods for petroleum and certain petroleum products set forth by the U.S. Customs and Border Protection Laboratory Methods (CBPL) and American Society for Testing and Materials (ASTM):

CBPL No.ASTMTitle
27-01D287Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method).
27-02D1298Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method.
27-03D4006Standard Test Method for Water in Crude Oil by Distillation.
27-04D95Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation.
27-05D4928Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration.
27-06D473Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method.
27-07D4807Standard Test Method for Sediment in Crude Oil by Membrane Filtration.
27-08D86Standard Test Method for Distillation of Petroleum Products.
27-11D445Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids.
27-13D4294Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-ray Fluorescence Spectrometry.
27-46D5002Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer.
27-48D4052Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter.
27-50D93Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester.
27-53D2709Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge.
27-54D1796Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method.
D70Density of Semi-solid Bituminous Materials (Pycnometer method).
D97Standard Test Method for Pour Point of Petroleum Products.
D4007Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure).

Anyone wishing to employ this entity to conduct laboratory analyses and gauger services should request and receive written assurances from the entity that it is accredited or approved by the U.S. Customs and Border Protection to conduct the specific test or gauger service requested. Alternatively, inquiries regarding the specific test or gauger service this entity is accredited or approved to perform may be directed to the U.S. Customs and Border Protection by calling (202) 344-1060. The inquiry may also be sent to CBPGaugersLabs@cbp.dhs.gov. Please reference the website listed below for a complete listing of CBP approved gaugers and accredited laboratories. http://www.cbp.gov/​about/​labs-scientific/​commercial-gaugers-and-laboratories.

Start Signature

Dated: January 11, 2019.

Patricia Hawes Coleman,

Acting Executive Director, Laboratories and Scientific Services.

End Signature End Supplemental Information

[FR Doc. 2019-00915 Filed 2-1-19; 8:45 am]

BILLING CODE 9111-14-P