Start Printed Page 933
United States International Trade Commission.
The Commission hereby gives notice of the scheduling of the final phase of antidumping and countervailing duty investigation Nos. 701-TA-624-625 and 731-TA-1450-1451 (Final) pursuant to the Tariff Act of 1930 (“the Act”) to determine whether an industry in the United States is materially injured or threatened with material injury, or the establishment of an industry in the United States is materially retarded, by reason of imports of quartz surface products from India and Turkey, provided for in subheading 6810.99.00 of the Harmonized Tariff Schedule of the United States, preliminarily determined by the Department of Commerce (“Commerce”) to be subsidized and sold at less-than-fair-value.
December 13, 2019.
Start Further Info
FOR FURTHER INFORMATION CONTACT:
Julie Duffy ((202) 708-2579), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearing-impaired persons can obtain information on this matter by contacting the Commission's TDD terminal on 202-205-1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202-205-2000. General information concerning the Commission may also be obtained at https://www.usitc.gov. The public record for these investigations may be viewed on the Commission's electronic docket (EDIS) at https://edis.usitc.gov.
End Further Info
Start Supplemental Information
Scope.— For purposes of these investigations, Commerce has defined the subject merchandise as Quartz surface products. Quartz surface products consist of slabs and other surfaces created from a mixture of materials that includes predominately silica (e.g., quartz, quartz powder, cristobalite, glass powder) as well as a resin binder (e.g., an unsaturated polyester). The incorporation of other materials, including, but not limited to, pigments, cement, or other additives does not remove the merchandise from the scope of the investigation. However, the scope of the investigation only includes products where the silica content is greater than any other single material, by actual weight. Quartz surface products are typically sold as rectangular slabs with a total surface area of approximately 45 to 60 square feet and a nominal thickness of one, two, or three centimeters. However, the scope of the investigation includes surface products of all other sizes, thicknesses, and shapes. In addition to slabs, the scope of the investigation includes, but is not limited to, other surfaces such as countertops, backsplashes, vanity tops, bar tops, work tops, tabletops, flooring, wall facing, shower surrounds, fire place surrounds, mantels, and tiles. Certain quartz surface products are covered by the investigation whether polished or unpolished, cut or uncut, fabricated or not fabricated, cured or uncured, edged or not edged, finished or unfinished, thermoformed or not thermoformed, packaged or unpackaged, and regardless of the type of surface finish. In addition, quartz surface products are covered by the investigation whether or not they are imported attached to, or in conjunction with, non-subject merchandise such as sinks, sink bowls, vanities, cabinets, and furniture. If quartz surface products are imported attached to, or in conjunction with, such non-subject merchandise, only the quartz surface product is covered by the scope.
Subject merchandise includes material matching the above description that has been finished, packaged, or otherwise fabricated in a third country, including by cutting, polishing, curing, edging, thermoforming, attaching to, or packaging with another product, or any other finishing, packaging, or fabrication that would not otherwise remove the merchandise from the scope of the investigation if performed in the country of manufacture of the quartz surface products. The scope of the investigation does not cover quarried stone surface products, such as granite, marble, soapstone, or quartzite. Specifically excluded from the scope of the investigation are crushed glass surface products. Crushed glass surface products must meet each of the following criteria to qualify for this exclusion: (1) The crushed glass content is greater than any other single material, by actual weight; (2) there are pieces of crushed glass visible across the surface of the product; (3) at least some of the individual pieces of crushed glass that are visible across the surface are larger than 1 centimeter wide as measured at their widest cross-section (Glass Pieces); and (4) the distance between any single Glass Piece and the closest separate Glass Piece does not exceed three inches.
The products subject to the scope are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under the following subheading: 6810.99.0010. Subject merchandise may also enter under subheadings 6810.11.0010, 6810.11.0070, 6810.19.1200, 6810.19.1400, 6810.19.5000, 6810.91.0000, 6810.99.0080, 6815.99.4070, 2506.10.0010, 2506.10.0050, 2506.20.0010, 2506.20.0080, and 7016.90.1050. The HTSUS subheadings set forth above are provided for convenience and U.S. Customs purposes only. The written description of the scope is dispositive.
Background.—The final phase of these investigations is being scheduled pursuant to sections 705(b) and 731(b) of the Tariff Act of 1930 (19 U.S.C. 1671d(b) and 1673d(b)), as a result of affirmative preliminary determinations by Commerce that certain benefits which constitute subsidies within the meaning of section 703 of the Act (19 U.S.C. 1671b) are being provided to manufacturers, producers, or exporters in India and Turkey of quartz surface products, and that such products are being sold in the United States at less than fair value within the meaning of section 733 of the Act (19 U.S.C. 1673b). The investigations were requested in petitions filed on May 8, 2019, by Cambria Company LLC, Eden Prairie, Minnesota.
For further information concerning the conduct of this phase of the investigations, hearing procedures, and rules of general application, consult the Commission's Rules of Practice and Procedure, part 201, subparts A and B (19 CFR part 201), and part 207, subparts A and C (19 CFR part 207).
Participation in the investigations and public service list.—Persons, including industrial users of the subject merchandise and, if the merchandise is sold at the retail level, representative consumer organizations, wishing to participate in the final phase of these investigations as parties must file an entry of appearance with the Secretary to the Commission, as provided in section 201.11 of the Commission's rules, no later than 21 days prior to the hearing date specified in this notice. A party that filed a notice of appearance during the preliminary phase of the investigations need not file an additional notice of appearance during this final phase. The Secretary will Start Printed Page 934maintain a public service list containing the names and addresses of all persons, or their representatives, who are parties to the investigations.
Limited disclosure of business proprietary information (BPI) under an administrative protective order (APO) and BPI service list.—Pursuant to section 207.7(a) of the Commission's rules, the Secretary will make BPI gathered in the final phase of these investigations available to authorized applicants under the APO issued in the investigations, provided that the application is made no later than 21 days prior to the hearing date specified in this notice. Authorized applicants must represent interested parties, as defined by 19 U.S.C. 1677(9), who are parties to the investigations. A party granted access to BPI in the preliminary phase of the investigations need not reapply for such access. A separate service list will be maintained by the Secretary for those parties authorized to receive BPI under the APO.
Staff report.—The prehearing staff report in the final phase of these investigations will be placed in the nonpublic record on April 15, 2020, and a public version will be issued thereafter, pursuant to section 207.22 of the Commission's rules.
Hearing.—The Commission will hold a hearing in connection with the final phase of these investigations beginning at 9:30 a.m. on Tuesday, April 28, 2020, at the U.S. International Trade Commission Building. Requests to appear at the hearing should be filed in writing with the Secretary to the Commission on or before April 23, 2020. A nonparty who has testimony that may aid the Commission's deliberations may request permission to present a short statement at the hearing. All parties and nonparties desiring to appear at the hearing and make oral presentations should participate in a prehearing conference to be held on April 24, 2020, at the U.S. International Trade Commission Building, if deemed necessary. Oral testimony and written materials to be submitted at the public hearing are governed by sections 201.6(b)(2), 201.13(f), and 207.24 of the Commission's rules. Parties must submit any request to present a portion of their hearing testimony in camera no later than 7 business days prior to the date of the hearing.
Written submissions.—Each party who is an interested party shall submit a prehearing brief to the Commission. Prehearing briefs must conform with the provisions of section 207.23 of the Commission's rules; the deadline for filing is April 21, 2020. Parties may also file written testimony in connection with their presentation at the hearing, as provided in section 207.24 of the Commission's rules, and posthearing briefs, which must conform with the provisions of section 207.25 of the Commission's rules. The deadline for filing posthearing briefs is May 5, 2020. In addition, any person who has not entered an appearance as a party to the investigations may submit a written statement of information pertinent to the subject of the investigations, including statements of support or opposition to the petition, on or before May 5, 2020. On May 22, 2020, the Commission will make available to parties all information on which they have not had an opportunity to comment. Parties may submit final comments on this information on or before May 27, 2020, but such final comments must not contain new factual information and must otherwise comply with section 207.30 of the Commission's rules. All written submissions must conform with the provisions of section 201.8 of the Commission's rules; any submissions that contain BPI must also conform with the requirements of sections 201.6, 207.3, and 207.7 of the Commission's rules. The Commission's Handbook on Filing Procedures, available on the Commission's website at https://www.usitc.gov/documents/handbook_on_filing_procedures.pdf, elaborates upon the Commission's procedures with respect to filings.
Additional written submissions to the Commission, including requests pursuant to section 201.12 of the Commission's rules, shall not be accepted unless good cause is shown for accepting such submissions, or unless the submission is pursuant to a specific request by a Commissioner or Commission staff.
In accordance with sections 201.16(c) and 207.3 of the Commission's rules, each document filed by a party to the investigations must be served on all other parties to the investigations (as identified by either the public or BPI service list), and a certificate of service must be timely filed. The Secretary will not accept a document for filing without a certificate of service.
Authority: These investigations are being conducted under authority of title VII of the Tariff Act of 1930; this notice is published pursuant to section 207.21 of the Commission's rules.
End Supplemental Information
By order of the Commission.
Issued: January 3, 2020.
Supervisory Hearings and Information Officer.
[FR Doc. 2020-00094 Filed 1-7-20; 8:45 am]
BILLING CODE 7020-02-P