Skip to Content

Notice

Hazardous Materials; Notice of Applications for Modifications to Special Permits

This document has a comment period that ends in 2 days. (01/31/2020) Submit a formal comment

Read the 55 public comments

Document Details

Information about this document as published in the Federal Register.

Document Statistics
Document page views are updated periodically throughout the day and are cumulative counts for this document including its time on Public Inspection. Counts are subject to sampling, reprocessing and revision (up or down) throughout the day.
Enhanced Content

Relevant information about this document from Regulations.gov provides additional context. This information is not part of the official Federal Register document.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT.

ACTION:

List of applications for modification of special permits.

SUMMARY:

In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations, notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein. Each mode of transportation for which a particular special permit is requested is indicated by a number in the “Nature of Application” portion of the table below as follows: 1—Motor vehicle, 2—Rail freight, 3—Cargo vessel, Start Printed Page 28094—Cargo aircraft only, 5—Passenger-carrying aircraft.

DATES:

Comments must be received on or before January 31, 2020.

ADDRESSES:

Record Center, Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation, Washington, DC 20590.

Comments should refer to the application number and be submitted in triplicate. If confirmation of receipt of comments is desired, include a self-addressed stamped postcard showing the special permit number.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Donald Burger, Chief, Office of Hazardous Materials Approvals and Permits Division, Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation, East Building, PHH-30, 1200 New Jersey Avenue Southeast, Washington, DC 20590-0001, (202) 366-4535.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

Copies of the applications are available for inspection in the Records Center, East Building, PHH-30, 1200 New Jersey Avenue Southeast, Washington DC or at http://regulations.gov.

This notice of receipt of applications for special permit is published in accordance with part 107 of the Federal hazardous materials transportation law (49 U.S.C. 5117(b); 49 CFR 1.53(b)).

Start Signature

Issued in Washington, DC, on January 09, 2020.

Donald P. Burger,

Chief, General Approvals and Permits Branch.

End Signature

Special Permits Data

Application No.ApplicantRegulation(s) affectedNature of the special permits thereof
14175-MPraxair, Inc180.209(b)(1)(iii), 180.209(b)(1)(iv)To modify the special permit to clarify what is a package and what is a packaging and to authorize a 10-year retest interval for individual DOT specification 3A or 3AA cylinders, not exceeding 125 pounds water capacity configured into bundles. (modes 1, 2, 3, 4).
14994-MAuto Chlor System Ltd173.28(b)(4)(i)To modify the special permit to authorize an additional hazardous material. (mode 1).
15279-MUniversity Of Colorado At Boulder, Ehs172.301(a), 172.301(b), 172.301(c), 173.196(a), 173.196(b), 178.609To modify the special permit to authorize new destinations due to lab increasing in size and moving. (mode 1).
16274-MMatheson Tri-gas, Inc173.13(c)(2)(i), 173.13(c)(2)(ii), 173.13(c)(2)(iii)To modify the special permit to clarify placarding requirements and ICAO Technical Instructions. (modes 1, 4).
20858-MCryoconcepts, Lp173.304a(a)(1), 173.306(a)To modify the special permit to clarify the maximum fill density of compressed gas in the cylinders. (modes 1, 2, 3).
End Supplemental Information

[FR Doc. 2020-00605 Filed 1-15-20; 8:45 am]

BILLING CODE 4909-60-P