Skip to Content

Notice

Certain Carbon and Alloy Steel Cut-To-Length Plate From Italy: Final Results of Antidumping Duty Administrative Review; 2016-2018

Document Details

Information about this document as published in the Federal Register.

Document Statistics
Document page views are updated periodically throughout the day and are cumulative counts for this document including its time on Public Inspection. Counts are subject to sampling, reprocessing and revision (up or down) throughout the day.
Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The Department of Commerce (Commerce) finds that the producers/exporters subject to this administrative review made sales of subject merchandise at less than normal value during the period of review (POR), November 14, 2016 through April 30, 2018.

DATES:

Applicable January 17, 2020.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Alice Maldonado or David Crespo, AD/CVD Operations, Office II, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-4682 or (202) 482-3693, respectively.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

Background

This review covers ten producers/exporters of the subject merchandise. Commerce selected two companies, NLMK Verona SpA (NVR) and Officine Tecnosider s.r.l. (OTS), for individual examination. The producers and/or exporters not selected for individual examination are listed in the “Final Results of the Review” section of this notice.

On July 17, 2019, Commerce published the Preliminary Results.[1] For a description of the events that occurred since the Preliminary Results, see the Issues and Decision Memorandum.[2] On October 23, 2019, we postponed the final results by 57 days, until January 10, 2020.[3]

Commerce conducted this administrative review in accordance Start Printed Page 3027with section 751 of the Tariff Act of 1930, as amended (the Act).

Scope of the Order

The merchandise subject to the order is certain carbon and alloy steel cut-to-length plate from Italy. The product is currently classified under the following Harmonized Tariff Schedule on the United States (HTSUS) item numbers: 7208.40.3030, 7208.40.3060, 7208.51.0030, 7208.51.0045, 7208.51.0060, 7208.52.0000, 7211.13.0000, 7211.14.0030, 7211.14.0045, 7225.40.1110, 7225.40.1180, 7225.40.3005, 7225.40.3050, 7226.20.0000, and 7226.91.5000. Although the HTSUS numbers are provided for convenience and for customs purposes, the written product description remains dispositive. For a complete description of the scope of the order, see the Issues and Decision Memorandum.

Analysis of Comments Received

All issues raised in the case and rebuttal briefs are listed in the appendix to this notice and addressed in the Issues and Decision Memorandum. The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at http://access.trade.gov, and to all interested parties in the Central Records Unit, room B8024, of the main Commerce building. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at http://enforcement.trade.gov/​frn/​index.html. The signed and electronic versions of the Issues and Decision Memorandum are identical in content.

Changes Since the Preliminary Results

Based on a review of the record and comments received from interested parties regarding our Preliminary Results, we made certain changes to the preliminary weighted-average dumping margin for NVR and for those companies not selected for individual review.[4]

Final Results of the Review

We are assigning the following weighted-average dumping margins to the firms listed below for the period November 14, 2016 through April 30, 2018:

Producers/exportersWeighted- average dumping margins (percent)
NLMK Verona SpA1.44
Officine Tecnosider s.r.l1.63
Euroflex SpA *1.57
Evraz Palini e Bertoli SpA *1.57
Ilva SpA *1.57
Metalcam SpA *1.57
Modelleria di Modini Renato *1.57
Ondulit Italiana SpA *1.57
Padana Tubi e Profilati Acciaio SpA *1.57
Riva Fire SpA *1.57
* Review-Specific Average Rate 5

Disclosure of Calculations

We intend to disclose the calculations performed for these final results to parties in this proceeding within five days of the date of publication of this notice, in accordance with 19 CFR 351.224(b).

Assessment Rates

Pursuant to section 751(a)(2)(C) of the Act and 19 CFR 351.212(b)(1), Commerce has determined, and U.S. Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries of subject merchandise in accordance with the final results of this review.

Where the respondent did not report entered value or reported amounts based on average data, we calculated the entered value in order to calculate the assessment rate. Where either the respondent's weighted-average dumping margin is zero or de minimis within the meaning of 19 CFR 351.106(c)(1), or an importer-specific rate is zero or de minimis, we will instruct CBP to liquidate the appropriate entries without regard to antidumping duties. We further will instruct CBP to take into account the “provisional measures deposit cap,” in accordance with 19 CFR 351.212(d). The final results of this review shall be the basis for the assessment of antidumping duties on entries of merchandise covered by the final results of this review.[6]

Commerce's “reseller policy” will apply to entries of subject merchandise during the POR produced by companies included in these final results of review for which the reviewed companies did not know that the merchandise they sold to the intermediary (e.g., a reseller, trading company, or exporter) was destined for the United States. In such instances, we will instruct CBP to liquidate unreviewed entries at the all-others rate if there is no rate for the intermediate company(ies) involved in the transaction.

For the companies which were not selected for individual review, we will assign an assessment rate based on the average of the cash deposit rates calculated for NVR and OTS.[7] The final results of this review shall be the basis for the assessment of antidumping duties on entries of merchandise covered by the final results of this review and for future deposits of estimated duties, where applicable.[8]

We intend to issue liquidation instructions to CBP 15 days after publication of the final results of this review.

Cash Deposit Requirements

The following cash deposit requirements will be effective for all shipments of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the publication date of the final results of this administrative review, as provided by section 751(a)(2)(C) of the Act: (1) The cash deposit rate for each specific company listed above will be equal to the weighted-average dumping margin that is established in the final results of this review, except if the rate is less than 0.50 percent and, therefore, de minimis within the meaning of 19 CFR 351.106(c)(1), in which case the cash deposit rate will be zero; (2) for companies not participating in this review, the cash deposit rate will continue to be the company-specific cash deposit rate published for the most recently completed segment of this proceeding in which the company participated; (3) if the exporter is not a firm covered in this review, or the original less-than-fair-value (LTFV) investigation, but the producer is, then the cash deposit rate will be the cash deposit rate established for the most recently completed segment for the producer of the subject merchandise; and (4) the cash deposit rate for all other producers or exporters will continue to be 6.08 percent, the all-others rate established in the LTFV investigation.9 Start Printed Page 3028These deposit requirements, when imposed, shall remain in effect until further notice.

Notification to Importers

This notice serves as a reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in Commerce's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties.

Administrative Protective Order

This notice also serves as a reminder to parties subject to administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation.

Notification to Interested Parties

We are issuing and publishing this notice in accordance with sections 751(a)(1) and 777(i)(1) of the Act, and 19 CFR 351.221(b)(5).

Start Signature

Dated: January 10, 2020.

Jeffrey I. Kessler,

Assistant Secretary for Enforcement and Compliance.

End Signature

Appendix

List of Topics Discussed in the Issues and Decision Memorandum

I. Summary

II. Background

III. Scope of the Order

IV. Margin Calculations

V. Discussion of the Issues

Comment 1: Product Characteristics and Control Numbers for NVR

Comment 2: NVR's Constructed Export Price (CEP) Offset Claim

Comment 3: Whether To Apply Smoothing for NVR's Material Costs

Comment 4: Universe of Sales for NVR

Comment 5: Other NVR Adjustments

VI. Recommendation

End Supplemental Information

Footnotes

1.  See Certain Carbon and Alloy Steel Cut-To Length Plate from Italy: Preliminary Results of Antidumping Duty Administrative Review; 2016-2018, 84 FR 34121 (July 17, 2019) (Preliminary Results).

Back to Citation

2.  See Memorandum, “Issues and Decision Memorandum for the Final Results of the 2016-2018 Administrative Review of the Antidumping Duty Order on Certain Carbon and Alloy Steel Cut-To-Length Plate from Italy,” dated concurrently with, and hereby adopted by, this notice (Issues and Decision Memorandum).

Back to Citation

3.  See Memorandum, “Carbon and Alloy Steel Cut-To-Length Plate from Italy: Extension of Deadline for Final Results of 2016-2018 Antidumping Duty Administrative Review,” dated October 23, 2019.

Back to Citation

4.  See accompanying Issues and Decision Memorandum.

Back to Citation

5.  This rate is based on the rates for the respondents that were selected for individual review, excluding rates that are zero, de minimis, or based entirely on facts available. See section 735(c)(5)(A) of the Act.

Back to Citation

6.  See section 751(a)(2)(C) of the Act.

Back to Citation

7.  This rate was calculated as discussed in footnote 5.

Back to Citation

8.  See section 751(a)(2)(C) of the Act.

Back to Citation

9.  See Certain Carbon and Alloy Steel Cut-To-Length Plate from Austria, Belgium, France, the Federal Republic of Germany, Italy, Japan, the Republic of Korea, and Taiwan: Amended Final Affirmative Antidumping Determinations for France, the Federal Republic of Germany, the Republic of Korea, and Taiwan, and Antidumping Duty Orders, 82 FR 24096, 24098 (May 25, 2017).

Back to Citation

[FR Doc. 2020-00761 Filed 1-16-20; 8:45 am]

BILLING CODE 3510-DS-P