Start Printed Page 27690
Agricultural Marketing Service.
This proposal invites comments on a change to the eligibility requirements for nominees representing domestic manufacturers on the Softwood Lumber Board (Board) established under the Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order (Order). The Board administers the Order with oversight by the U.S. Department of Agriculture (USDA).
Comments must be received by June 10, 2020.
Interested persons are invited to submit written comments concerning this proposed rule. All comments must be submitted through the Federal e-rulemaking portal at http://www.regulations.gov and should reference the document number and the date and page number of this issue of the Federal Register. All comments submitted in response to this proposed rule will be included in the rulemaking record and will be made available to the public. Please be advised that the identity of the individuals or entities submitting comments will be made public on the internet at http://www.regulations.gov.
Start Further Info
FOR FURTHER INFORMATION CONTACT:
Andrea Ricci, Marketing Specialist, Promotion and Economics Division, Specialty Crops Program, AMS, USDA, 1400 Independence Avenue SW, Room 1406-S, Stop 0244, Washington, DC 20250-0244; telephone: (202) 572-1442; facsimile: (202) 205-2800; or electronic mail: Andrea.Ricci@usda.gov.
End Further Info
Start Supplemental Information
This proposal affecting 7 CFR part 1217 (herein the “Order”) is authorized by the Commodity Promotion, Research, and Information Act of 1996 (1996 Act) (7 U.S.C. 7411-7425).
Executive Orders 12866, 13563, and 13771
Executive Orders 12866 and 13563 direct agencies to assess all costs and benefits of available regulatory alternatives and, if regulation is necessary, to select regulatory approaches that maximize net benefits (including potential economic, environmental, public health and safety effects, distributive impacts and equity). Executive Order 13563 emphasizes the importance of quantifying both costs and benefits, reducing costs, harmonizing rules and promoting flexibility. This action falls within a category of regulatory actions that the Office of Management and Budget (OMB) exempted from Executive Order 12866 review. Additionally, because this rule does not meet the definition of a significant regulatory action it does not trigger the requirements contained in Executive Order 13771. See OMB's Memorandum titled “Interim Guidance Implementing Section 2 of the Executive Order of January 30, 2017, titled `Reducing Regulation and Controlling Regulatory Costs' ” (February 2, 2017).
This action has been reviewed in accordance with the requirements of Executive Order 13175, Consultation and Coordination with Indian Tribal Governments. The review reveals that this regulation would not have substantial and direct effects on Tribal governments and would not have significant Tribal implications.
This proposal has been reviewed under Executive Order 12988, Civil Justice Reform. It is not intended to have retroactive effect. Section 524 of the 1996 Act (7 U.S.C. 7423) provides that it shall not affect or preempt any other Federal or State law authorizing promotion or research relating to an agricultural commodity.
Section 519 of the 1996 Act (7 U.S.C. 7418) provides that a person subject to an order may file a written petition with USDA stating that an order, any provision of an order, or any obligation imposed in connection with an order, is not established in accordance with the law, and request a modification of an order or an exemption from an order. Any petition filed challenging an order, any provision of an order, or any obligation imposed in connection with an order, must be filed within two years after the effective date of an order, provision, or obligation subject to challenge in the petition. The petitioner will have the opportunity for a hearing on the petition. Thereafter, USDA will issue a ruling on the petition. The 1996 Act provides that the district court of the United States for any district in which the petitioner resides or conducts business shall have the jurisdiction to review a final ruling on the petition, if the petitioner files a complaint for that purpose not later than 20 days after the date of the entry of USDA's final ruling.
This proposal invites comments on a change to the eligibility requirements for nominees representing domestic manufacturers on the Board. The Board administers the Order with oversight by the USDA. Pursuant to the Order, assessments are collected from domestic manufacturers and importers, and used for research and promotion projects designed to strengthen the position of softwood lumber in the marketplace. This proposed change was recommended to the Secretary by the Board at its February 26, 2020, meeting, and will contribute to the effective administration of the program.
Section 1217.40 provides for the establishment of the Board. The Board is comprised of manufacturers for the U.S. market who manufacture and domestically ship or import 15 million board feet or more of softwood lumber in the United States during a fiscal period. In November 2018, the Board recommended revising the Board composition from 19 to 14 members over a three-year period. The Board took into consideration the consolidation of the softwood lumber industry since the inception of the program, along with the number of companies eligible to be represented on the Board. Additionally, the Board recommended that U.S. Board members reside in the region they represent. This was intended to ensure that entities from outside the U.S. that Start Printed Page 27691own softwood lumber entities within the U.S. could only represent a U.S. region on the Board. The recommendation was finalized in a rule that was published in the Federal Register on September 25, 2019 (84 FR 50294). The 2021 Board and each subsequent Board shall be comprised of 14 members, 10 of whom shall represent domestic manufacturers and four shall represent importers. Domestic manufacturer Board members represent three regions: U.S. South Region, U.S. West Region; and Northeast and Lake States Region. The Order prescribes that domestic manufacturer representatives reside in the region they represent.
The Board met on February 26, 2020, and recommended the Order be revised to allow a domestic manufacturer's representative to seek nomination in any of the regions where the manufacturer they represent has manufacturing operations. The current Order limits manufacturer representatives to seek nomination only in the region where he or she resides. The Board conducted nominations under the newly implemented provisions and found that clarification in the Order was needed to reflect the multi-regional nature of manufacturers rather than the individual nominee. Several domestic manufacturers have operations in multiple U.S. regions. Revising the Order to allow a person to seek nomination in one of the regions where the manufacturer they represent has operations would provide flexibility to the Order, while maintaining the intent that Board members representing domestic manufacturers reside in the U.S. This proposal is will help facilitate program operations. Therefore, § 1217.40 (b)(1), (b)(1)(i), (b)(1)(ii), and (b)(1)(iii) would be revised accordingly.
Initial Regulatory Flexibility Act Analysis
In accordance with the Regulatory Flexibility Act (RFA) (5 U.S.C. 601-612), the Agricultural Marketing Service (AMS) is required to examine the impact of the action on small entities. Accordingly, AMS has considered the economic impact of this action on such entities.
The purpose of the RFA is to fit regulatory actions to the scale of businesses subject to the actions so that small businesses will not be disproportionately burdened. The Small Business Administration (SBA) defines, in 13 CFR part 121, small agricultural service firms (domestic softwood lumber manufacturers and importers) as those having annual receipts of no more than $8 million.
The Random Lengths Publications, Inc.'s yearly average framing lumber composite price was $356 per thousand board feet (mbf) in 2019. Dividing the $8 million threshold that defines an agricultural service firm as small by this price results in a maximum threshold of 22.5 million board feet (mmbf) of softwood lumber per year that a domestic manufacturer or importer may ship to be considered a small entity for purposes of the RFA. Table 1 shows the number of entities and the amount of volume they represent that may be categorized as small or large based on the SBA definition.
Table 1—Domestic Manufacturers and Importers by SBA Size Standards, 2019
| ||Domestic manufacturers||Importers||Totals|
|Entities||Volume (MMBF)||Entities||Volume (MMBF)||Entities||Volume (MMBF)|
|Sources: Forest Economic Advisors; Customs and Border Protection.|
As shown in Table 1, there are a total of 1,396 domestic manufacturers and importers of softwood lumber based on 2019 data. Of these, 1,000 entities, or 72 percent, shipped or imported less than 22.5 mmbf and would be considered small based on the SBA definition. These 1,000 entities domestically manufactured or imported 3.25 billion board feet (bbf) in 2019, less than 5 percent of total volume. The proposed revision to the Board eligibility requirements would not disproportionately burden small domestic manufacturers and importers of softwood lumber.
This proposal would revise § 1217.40 (b)(1), (b)(1)(i), (b)(1)(ii), and (b)(1)(iii) to allow domestic softwood lumber manufacturer representatives to seek nomination in any of the regions where the manufacturer they represent has manufacturing operations. The Order is administered by the Board with oversight by the USDA. In accordance with the program requirements, assessments are collected from domestic manufacturers and importers, and used for research and promotion projects designed to strengthen the position of softwood lumber in the marketplace. Revising the Order to allow a person to seek nomination in one of the regions where the softwood lumber manufacturer has operations would provide flexibility to the Order, while maintaining the intent that Board members representing domestic manufacturers reside in the U.S.
In accordance with the Paperwork Reduction Act of 1995 (44 U.S.C. Chapter 35), the information collection and recordkeeping requirements that are imposed by the Order have been approved previously under OMB control number 0581-0093. This proposed rule would not result in a change to the information collection and recordkeeping requirements previously approved and would impose no additional reporting and recordkeeping burden on domestic manufacturers and importers of softwood lumber.
As with all Federal promotion programs, reports and forms are periodically reviewed to reduce information requirements and duplication by industry and public sector agencies. USDA has not Start Printed Page 27692identified any relevant Federal rules that duplicate, overlap, or conflict with this proposed rule.
Regarding alternatives, the Board considered not changing the nominee eligibility requirements, however, the entire Board determined that making this proposed change would better align the Order provisions with industry practices and would help facilitate Board operations. This proposal was discussed at the Industry Relations and Governance Committee meeting on February 18, 2020, and at the Board meeting on February 26, 2020.
AMS has performed this initial RFA analysis regarding the impact of this action on small entities and invites comments concerning potential effects of this action.
USDA has determined that this proposed rule is consistent with and would effectuate the purposes of the 1996 Act.
A 30-day comment period is provided to allow interested persons to respond to this proposal. All written comments received in response to this proposed rule by the date specified will be considered prior to finalizing this action.
Start List of Subjects
End List of Subjects
- Administrative practice and procedure
- Consumer information
- Marketing agreements
- Softwood Lumber promotion
- Reporting and recordkeeping requirements
For the reasons set forth in the preamble, 7 CFR part 1217, is proposed to be amended as follows:
PART 1217—SOFTWOOD LUMBER RESEARCH, PROMOTION, CONSUMER EDUCATION AND INDUSTRY INFORMATION ORDER
Start Amendment Part
1. The authority citation for 7 CFR part 1217 continues to read as follows:End Amendment Part
Start Amendment Part
2. In § 1217.40, revise paragraphs (b)(1) introductory text, (b)(1)(i), (ii), and iii), to read as follows: End Amendment Part
Establishment and membership.
* * * * *
(b) * * *
(1) Domestic manufacturers. Domestic manufacturers must reside in the United States. For the 2020 Board, 11 members shall represent domestic manufacturers and for the 2021 Board and each subsequent Board, ten members shall represent domestic manufacturers who reside in the following three regions:
(i) Five members shall represent manufacturers of softwood lumber in the U.S. South Region, which consists of the states of Alabama, Arkansas, Florida, Georgia, Louisiana, Mississippi, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, Virginia, and West Virginia. For the 2020 Board, of these five members, two must represent large and three must represent small domestic manufacturers. For the 2021 Board and each subsequent Board of these five members, two must represent large, two must represent small, and one may represent domestic manufacturers of any size;
(ii) Five members shall represent manufacturers of softwood lumber in the U.S. West Region for the 2020 Board, and for the 2021 Board and each subsequent Board, four members shall manufacture softwood lumber in the U.S. West Region, which consists of the states of Alaska, Arizona, California, Colorado, Hawaii, Idaho, Montana, Nevada, New Mexico, North Dakota, Oregon, South Dakota, Utah, Washington, and Wyoming. For the 2020 Board, of these five members, four must represent large and one must represent small domestic manufacturers. For the 2021 Board and each subsequent Board, of the four members, two must represent large, one must represent small, and one may represent domestic manufacturers of any size; and
(iii) One member shall represent a manufacturer of softwood lumber in the Northeast and Lake States Region, which consists of the states of Connecticut, Delaware, Illinois, Indiana, Iowa, Kansas, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, Nebraska, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Wisconsin and all other parts of the United States not listed in paragraph (b)(1)(i), (ii), or (iii) of this section. This member may represent domestic manufacturers of any size.
* * * * *
End Supplemental Information
[FR Doc. 2020-09726 Filed 5-8-20; 8:45 am]
BILLING CODE 3410-02-P