This site displays a prototype of a “Web 2.0” version of the daily Federal Register. It is not an official legal edition of the Federal Register, and does not replace the official print version or the official electronic version on GPO’s govinfo.gov.
The documents posted on this site are XML renditions of published Federal Register documents. Each document posted on the site includes a link to the corresponding official PDF file on govinfo.gov. This prototype edition of the daily Federal Register on FederalRegister.gov will remain an unofficial informational resource until the Administrative Committee of the Federal Register (ACFR) issues a regulation granting it official legal status. For complete information about, and access to, our official publications and services, go to About the Federal Register on NARA's archives.gov.
The OFR/GPO partnership is committed to presenting accurate and reliable regulatory information on FederalRegister.gov with the objective of establishing the XML-based Federal Register as an ACFR-sanctioned publication in the future. While every effort has been made to ensure that the material on FederalRegister.gov is accurately displayed, consistent with the official SGML-based PDF version on govinfo.gov, those relying on it for legal research should verify their results against an official edition of the Federal Register. Until the ACFR grants it official status, the XML rendition of the daily Federal Register on FederalRegister.gov does not provide legal notice to the public or judicial notice to the courts.
National Institute of Standards and Technology, Department of Commerce.
Notice; request for comments.
The National Institute of Standards and Technology (NIST) seeks comments on the Draft NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 4.0. This document is available online at: https://www.nist.gov/el/smart-grid/smart-grid-framework.
Comments must be received on or before 5:00 p.m. Eastern Time on November 2, 2020. Written comments in response to this Request for Comments (RFC) should be submitted according to the instructions in the ADDRESSES and SUPPLEMENTARY INFORMATION sections below. Submissions received after that date may not be considered.
Written comments may be sent to the Smart Grid and Cyber Physical Systems Program Office, National Institute of Standards and Technology, 100 Bureau Drive, Mail Stop 8200, Gaithersburg, MD 20899-8200 or by email at smartgridframework@nist.gov. Comments containing references, studies, research, and other empirical data that are not widely published should include copies of the referenced materials.
All submissions, including attachments and other supporting materials, will become part of the public record and subject to public disclosure. NIST reserves the right to publish relevant comments, unedited and in their entirety. All relevant comments received in response to the RFC will be made publicly available at https://www.nist.gov/el/smart-grid/smart-grid-framework. Personal information, such as account numbers or Social Security numbers, or names of other individuals, should not be included. Do not submit confidential business information or otherwise sensitive or protected information. Comments that contain profanity, vulgarity, threats, or other inappropriate language or content will not be considered.
Mr. Cuong Nguyen, Smart Grid and Cyber-Physical Systems Program Office, National Institute of Standards and Technology, 100 Bureau Drive, Mail Stop 8200, Gaithersburg, MD 20899-8200; telephone 301-975-2254, fax 301-948-5668; or via email at smartgridframework@nist.gov.
Section 1305 of the Energy Independence and Security Act (EISA) of 2007 (Pub. L. 110-140) directs NIST “to coordinate the development of a framework that includes protocols and model standards for information management to achieve interoperability of smart grid devices and systems.” To meet these statutory goals, in January 2010, NIST published the NIST Framework and Roadmap for ( printed page 58339) Smart Grid Interoperability Standards, Release 1.0 (Release 1.0), and in February 2012, NIST published the NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 2.0 (Release 2.0), which updated the material discussed in Release 1.0. The most recent update of the framework, Release 3.0, was released in 2014 and introduced new interoperability requirements among the generation, distribution, and customer domains.
NIST now announces publication of the Draft NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 4.0 (Draft Release 4.0) for public review and comment. Draft Release 4.0 is available online at: https://www.nist.gov/el/smart-grid/smart-grid-framework.
Draft Release 4.0 is a substantial revision of previous releases to address structural changes and increasing system complexity in the grid. This release includes a description of communications scenarios inspired by different grid architectures, which are used to more closely examine unique interoperability requirements. The interoperability implications of expanding grid communications in four key areas—grid cybersecurity, operations, economics, and associated requirements for testing and certification—are also explored.
Draft Release 4.0 reflects changes taking place in the grid, including the accelerating pace of technological change, rapidly falling prices for modern energy technologies such as solar photovoltaic (PV) and other distributed energy resources (DER), increased proliferation of low-cost sensors and network enabled devices, and the resulting surge in granularity and amount of data being generated. The issues surrounding empowered consumers, the coordination of tens of thousands of devices operating across the system, and multi-directional power flows are also considered.
Request For Comments:
NIST seeks comments on the Draft NIST Framework and Roadmap for Smart Grid Interoperability Standards, Release 4.0. In particular, the agency requests that comments be categorized as (1) technical; (2) editorial; or (3) general. If a comment is not a general comment, please identify the relevant page, line number, and section of Draft Release 4.0 that is addressed by the comment. NIST will also accept proposed solutions along with the comments. Comments should be submitted in accordance with instructions in the DATES and ADDRESSES sections of this notice. All relevant responses that comply with the requirements listed in the DATES and ADDRESSES sections of this RFC will be considered.
Kevin A. Kimball,
Chief of Staff.
[FR Doc. 2020-20587 Filed 9-17-20; 8:45 am]
BILLING CODE 3510-13-P