Skip to Content

We invite you to try out our new beta eCFR site at https://ecfr.federalregister.gov. We’ve made big changes to make the eCFR easier to use. Be sure to leave feedback using the 'Feedback' button on the bottom right of each page!

Proposed Rule

Airworthiness Directives; Bell Textron Canada Limited (Type Certificate Previously Held by Bell Helicopter Textron Canada Limited) Helicopters

This document has a comment period that ends in 42 days. (05/24/2021) Submit a formal comment

Thank you for taking the time to create a comment. Your input is important.

Once you have filled in the required fields below you can preview and/or submit your comment to the Transportation Department for review. All comments are considered public and will be posted online once the Transportation Department has reviewed them.

You can view alternative ways to comment or you may also comment via Regulations.gov at, https://www.regulations.gov/commenton/FAA-2021-0267-0001.

  1. Note: You can attach your comment as a file and/or attach supporting documents to your comment. Attachment Requirements.


  2. this will NOT be posted on regulations.gov


  3. An Individual

    An Organization

    Anonymous




  1. Preview Comment
Please review the Regulations.gov privacy notice and user notice .
Document Details

Information about this document as published in the Federal Register.

Document Statistics
Document page views are updated periodically throughout the day and are cumulative counts for this document. Counts are subject to sampling, reprocessing and revision (up or down) throughout the day.
Enhanced Content

Relevant information about this document from Regulations.gov provides additional context. This information is not part of the official Federal Register document.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Federal Aviation Administration (FAA), DOT.

ACTION:

Notice of proposed rulemaking (NPRM).

SUMMARY:

The FAA proposes to adopt a new airworthiness directive (AD) for Bell Textron Canada Limited (type certificate previously held by Bell Helicopter Textron Canada Limited) (Bell) Model 429 helicopters. This proposed AD was prompted by the identification of certain parts needing life limits and certification maintenance requirement (CMR) tasks. This proposed AD would require establishing life limits and CMR tasks for various parts. Depending on the results of the CMR tasks, this proposed AD would require corrective action. The FAA is proposing this AD to address the unsafe condition on these products.

DATES:

The FAA must receive comments on this proposed AD by May 24, 2021.

ADDRESSES:

You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods:

  • Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments.
  • Fax: (202) 493-2251.
  • Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.
  • Hand Delivery: Deliver to Mail address between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays.

For service information identified in this proposed rule, contact Bell Textron Canada Limited, 12,800 Rue de l'Avenir, Mirabel, Quebec J7J1R4; telephone (450) 437-2862 or (800) 363-8023; fax (450) 433-0272; or at https://www.bellcustomer.com. You may review this service information at the FAA, Office of the Regional Counsel, Southwest Region, 10101 Hillwood Pkwy., Room 6N-321, Fort Worth, TX 76177. For information on the availability of this material at the FAA, call (817) 222-5110.

Examining the AD Docket

You may examine the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-0267; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, the Transport Canada AD, any comments received, and other information. The street address for Docket Operations is listed above.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Matt Fuller, AD Program Manager, General Aviation & Rotorcraft Unit, Airworthiness Products Section, Operational Safety Branch, FAA, 10101 Hillwood Pkwy., Fort Worth, TX 76177; telephone (817) 222-5110; email matthew.fuller@faa.gov.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

Comments Invited

The FAA invites you to send any written relevant data, views, or Start Printed Page 18219arguments about this proposal. Send your comments to an address listed under ADDRESSES. Include “Docket No. FAA-2021-0267; Project Identifier 2017-SW-110-AD” at the beginning of your comments. The most helpful comments reference a specific portion of the proposal, explain the reason for any recommended change, and include supporting data. The FAA will consider all comments received by the closing date and may amend this proposal because of those comments.

Except for Confidential Business Information (CBI) as described in the following paragraph, and other information as described in 14 CFR 11.35, the FAA will post all comments received, without change, to https://www.regulations.gov, including any personal information you provide. The agency will also post a report summarizing each substantive verbal contact received about this NPRM.

Confidential Business Information

CBI is commercial or financial information that is both customarily and actually treated as private by its owner. Under the Freedom of Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public disclosure. If your comments responsive to this NPRM contain commercial or financial information that is customarily treated as private, that you actually treat as private, and that is relevant or responsive to this NPRM, it is important that you clearly designate the submitted comments as CBI. Please mark each page of your submission containing CBI as “PROPIN.” The FAA will treat such marked submissions as confidential under the FOIA, and they will not be placed in the public docket of this NPRM. Submissions containing CBI should be sent to Matt Fuller, AD Program Manager, General Aviation & Rotorcraft Unit, Airworthiness Products Section, Operational Safety Branch, FAA, 10101 Hillwood Pkwy., Fort Worth, TX 76177; telephone (817) 222-5110; email matthew.fuller@faa.gov. Any commentary that the FAA receives which is not specifically designated as CBI will be placed in the public docket for this rulemaking.

Background

Transport Canada, which is the aviation authority of Canada, has issued Canadian AD CF-2017-16, dated May 17, 2017, to correct an unsafe condition for Bell Model 429 helicopters, serial numbers 57001 and subsequent. Transport Canada advises that Bell has established life limits and CMR tasks for various parts and accordingly revised Chapter 4—Airworthiness Limitations Schedule of Bell Helicopter 429 Maintenance Manual BHT-429-MM-1 to Revision 26, dated September 9, 2016 (BHT-429-MM-1). Transport Canada states that failure to replace life-limited parts or perform CMR tasks as specified could result in an unsafe condition.

Accordingly, the Transport Canada AD requires updating the maintenance schedule for the parts affected with the airworthiness life limits and CMR tasks in Revision 26 of BHT-429-MM-1.

FAA's Determination

These helicopters have been approved by the aviation authority of Canada and are approved for operation in the United States. Pursuant to the FAA's bilateral agreement with Canada, Transport Canada, its technical representative, has notified the FAA of the unsafe condition described in its AD. The FAA is proposing this AD after evaluating all known relevant information and determining that the unsafe condition described previously is likely to exist or develop on other helicopters of the same type design.

Related Service Information

The FAA reviewed Chapter 4—Airworthiness Limitations Schedule of BHT-429-MM-1. This service information specifies airworthiness life limits, inspection intervals, and CMR requirements for parts installed on Model 429 helicopters. Revision 26 of this service information establishes life limits for a certain part-numbered tail rotor flapping outboard bearing and hoist kit cartridge cable cutter and CMR requirements for a certain part-numbered wheeled landing gear system, float/life raft kit, and hoist kit.

Additionally, the FAA reviewed Chapter 96-47—600-Pound External Hoist Electrical System—Operational Check, of Bell 429 Maintenance Manual Supplement For 600-Pound External Hoist Kit, BHT-429-MMS-4, Revision 1, dated March 14, 2014. This service information specifies inspection procedures and corrective action for various components of the hoist system.

Lastly, the FAA reviewed Testing and Fault Isolation, pages 101-117/118, Cleaning, pages 401-405/406, and Scheduled Maintenance, pages 609-611/612, of Goodrich Rescue Hoist System Component Maintenance Manual 25-00-38-1, dated July 15, 2009, for rescue hoist assembly part number 44316-12-102. This service information specifies maintenance procedures and lists replacement parts for this part-numbered Goodrich rescue hoist assembly.

Proposed AD Requirements in This NPRM

This proposed AD would require establishing a life limit for certain part-numbered tail rotor outboard flapping bearings and a certain part-numbered hoist kit cable cutter cartridge. This proposed AD would also require establishing recurring CMR tasks for a certain part-numbered wheeled landing gear system, float/life raft kit, and hoist kit. Depending on the results of the CMR tasks, this proposed AD would also require corrective action.

Differences Between This Proposed AD and the Transport Canada AD

This proposed AD would require corrective action for failed CMR tasks, whereas the Transport Canada AD does not. The Transport Canada AD requires accomplishing an operational check of the hoist cable anti-foul assembly daily after the last flight, whereas this proposed AD would require this action before the first flight of the day involving a hoist operation instead.

Costs of Compliance

The FAA estimates that this AD, if adopted as proposed, would affect 110 helicopters of U.S. Registry. Labor costs are estimated at $85 per work-hour. Based on these numbers, the FAA estimates the following costs in order to comply with this proposed AD.

Replacing a tail rotor outboard flapping bearing would take about 4 work-hours and parts would cost about $7,500 for an estimated cost of $7,840 per helicopter and $862,400 for the U.S. fleet, per replacement cycle. Replacing a hoist kit cable cutter cartridge would take about 3 work-hours and parts would cost about $5,200 for an estimated cost of $5,455 per helicopter and $600,050 for the U.S. fleet, per replacement cycle.

Performing a functional check of the wheeled landing gear system would take about 4 work-hours for an estimated cost of $340 per helicopter and $37,400 for the U.S. fleet, per cycle. Performing a functional check of the float/life raft kit would take about 2 work-hours for an estimated cost of $170 per helicopter and $18,700 for the U.S. fleet, per cycle.

Performing an operational check of the hoist kit cable anti-foul assembly would take about 2 work-hours for an estimated cost of $170 per helicopter and $18,700 for the U.S. fleet, per cycle. Cleaning, visually inspecting, and lubricating the rescue hoist cable would take about 2 work-hours for an estimated cost of $170 per helicopter and $18,700 for the U.S. fleet, per cycle. Performing an operational check of the Start Printed Page 18220hoist kit speed limit switches and the electrical system would take about 0.5 work-hour for an estimated cost of $43 per helicopter and $4,730 for the U.S. fleet, per cycle. Performing a functional check of the cable cutter cartridge electrical system would take about 3 work-hours for an estimated cost of $255 per helicopter and $28,050 for the U.S. fleet, per cycle.

The FAA has no way of determining the estimated costs to do allowable repairs based on the results of the CMR tasks. If required, replacing the float/life raft would take about 2 work-hours and parts would cost about $5,000 for an estimated cost of $5,170. Replacing the anti-foul assembly would take about 3 work-hours and parts would cost about $1,500 for an estimated cost of $1,755. Replacing a rescue hoist cable would take about 3 work-hours and parts would cost about $3,150 for an estimated cost of $3,405. Overhauling a rescue hoist assembly would cost about $83,000 and it would take about 8 work-hours to remove and reinstall the hoist for a labor cost of $680, for a total estimated cost of $83,680 per helicopter, per overhaul cycle. Alternatively, replacing a hoist would take about 8 work-hours and parts would cost about $200,000 for an estimated cost of $200,680 per helicopter, per replacement cycle.

Authority for This Rulemaking

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.

The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

Regulatory Findings

The FAA determined that this proposed AD would not have federalism implications under Executive Order 13132. This proposed AD would not have a substantial direct effect on the States, on the relationship between the national Government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed, I certify this proposed regulation:

(1) Is not a “significant regulatory action” under Executive Order 12866,

(2) Would not affect intrastate aviation in Alaska, and

(3) Would not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

Start List of Subjects

List of Subjects in 14 CFR Part 39

  • Air transportation
  • Aircraft
  • Aviation safety
  • Incorporation by reference
  • Safety
End List of Subjects

The Proposed Amendment

Accordingly, under the authority delegated to me by the Administrator, the FAA proposes to amend 14 CFR part 39 as follows:

Start Part

PART 39—AIRWORTHINESS DIRECTIVES

End Part Start Amendment Part

1. The authority citation for part 39 continues to read as follows:

End Amendment Part Start Authority

Authority: 49 U.S.C. 106(g), 40113, 44701.

End Authority
[Amended]
Start Amendment Part

2. The FAA amends § 39.13 by adding the following new airworthiness directive:

End Amendment Part

Bell Textron Canada Limited (Type Certificate Previously Held by Bell Helicopter Textron Canada Limited): Docket No. FAA-2021-0267; Project Identifier 2017-SW-110-AD.

(a) Comments Due Date

The FAA must receive comments on this airworthiness directive (AD) by May 24, 2021.

(b) Affected ADs

None.

(c) Applicability

This AD applies to Bell Textron Canada Limited (type certificate previously held by Bell Helicopter Textron Canada Limited) Model 429 helicopters, certificated in any category, serial numbers 57001 and subsequent.

(d) Subject

Joint Aircraft Service Component (JASC) Code: 3200, Landing Gear Systems, and 2560, Emergency Equipment.

(e) Unsafe Condition

This AD was prompted by parts remaining in service beyond their fatigue life or beyond maintenance intervals required by the certification maintenance requirements (CMRs) of the Instructions for Continued Airworthiness. The FAA is issuing this AD to prevent failure of a part, which could result in loss of control of the helicopter.

(f) Compliance

Comply with this AD within the compliance times specified, unless already done.

(g) Required Actions

(1) Before further flight after the effective date of this AD, remove from service any part that has reached or exceeded its life limit as follows. Thereafter, remove from service each part on or before reaching its life limit as follows:

(i) Tail rotor outboard flapping bearing part number (P/N) 429-312-103-117 and 429-312-103-119: 15,000 total hours time-in-service (TIS).

(ii) Hoist kit cable cutter cartridge P/N 42315-281: 5 years since date of manufacture.

(2) Before further flight after the effective date of this AD, perform the following CMR tasks for any part that has reached or exceeded its CMR interval as follows. Thereafter, perform the following CMR tasks for each part on or before reaching its CMR interval as follows:

Note 1 to paragraph (g)(2):

Chapter 4—Airworthiness Limitations Schedule of Bell Helicopter 429 Maintenance Manual BHT-429-MM-1 to Revision 26, dated September 9, 2016, contains additional information about the CMR tasks.

(i) Wheeled Landing Gear System P/N 429-705-001-101: 800 hours TIS or 1 year, whichever occurs first, perform a functional check of the Emergency Gear Release. If the functional check fails, before further flight, repair in accordance with FAA-approved procedures.

(ii) Float/Life Raft Kit P/N 429-706-069-101: 1,600 hours TIS, perform a functional check of the float/life raft kit electrical system to determine if there are any dormant failures including: Manual inflation switch, water immersion switch, auto-activation relay, manual activation relay, raft activation relay, test activation relay, and the fuse disc elements. If there is a failure, before next flight over water, replace the float/life raft.

(iii) Hoist Kit P/N 429-706-001-101:

(A) Before the first flight of the day involving a hoist operation, perform an operational check of the hoist cable anti-foul assembly. If the operational check fails, before next flight involving a hoist operation, repair or replace the anti-foul assembly.

(B) 3 hoist operating hours, clean, visually inspect the rescue hoist cable for damage, which may be indicated by a broken wire, kink, bird caging, flattened area, abrasion, or necking. If there is any damage, before further flight, replace the rescue hoist cable. If there is no damage, before further flight, lubricate the rescue hoist cable. For purposes of this AD, hoist operating hours are counted anytime the hoist motor is operating.

Note 2 to paragraph (g)(2)(iii)(B):

Bell Helicopter service information refers to hoist operating hours as hoisting hours.

(C) 800 hours TIS or 1 year, whichever occurs first, perform an operational check of the speed limit switches and perform an operational check of the 600-pound external hoist electrical system to inspect operation of the HOIST HOT caution light. If an Start Printed Page 18221operational check fails, before next flight involving a hoist operation, repair in accordance with FAA-approved procedures or replace the hoist.

(D) 2,200 hours TIS or 111 hoist operating hours, whichever occurs first, perform a functional check of the cable cutter cartridge electrical system to inspect for correct functioning of the cable cutter switches (hoist pendant, pilot cyclic, and copilot cyclic) and associated wiring. If a functional check fails, before next flight involving a hoist operation, repair in accordance with FAA-approved procedures or replace the hoist.

(E) 111 hoist operating hours, overhaul or replace the hoist.

(h) Alternative Methods of Compliance (AMOCs)

(1) The Manager, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the manager of the International Validation Branch, send it to the attention of the person identified in paragraph (i)(1) of this AD. Information may be emailed to: 9-AVS-AIR-730-AMOC@faa.gov.

(2) Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office.

(i) Related Information

(1) For more information about this AD, contact Matt Fuller, AD Program Manager, General Aviation & Rotorcraft Unit, Airworthiness Products Section, Operational Safety Branch, FAA, 10101 Hillwood Pkwy., Fort Worth, TX 76177; telephone (817) 222-5110; email matthew.fuller@faa.gov.

(2) For service information identified in this AD, contact Bell Textron Canada Limited, 12,800 Rue de l'Avenir, Mirabel, Quebec J7J1R4; telephone (450) 437-2862 or (800) 363-8023; fax (450) 433-0272; or at https://www.bellcustomer.com. You may review this referenced service information at the FAA, Office of the Regional Counsel, Southwest Region, 10101 Hillwood Pkwy., Room 6N-321, Fort Worth, TX 76177. For information on the availability of this material at the FAA, call (817) 222-5110.

(3) The subject of this AD is addressed in Transport Canada AD CF-2017-16, dated May 17, 2017. You may view the Transport Canada AD on the internet at https://www.regulations.gov in the AD Docket.

Start Signature

Issued on April 2, 2021.

Lance T. Gant,

Director, Compliance & Airworthiness Division, Aircraft Certification Service.

End Signature End Supplemental Information

[FR Doc. 2021-07184 Filed 4-7-21; 8:45 am]

BILLING CODE 4910-13-P