Skip to Content

Notice

Certain New Chemicals; Receipt and Status Information for May 2021

Document Details

Information about this document as published in the Federal Register.

Document Statistics
Document page views are updated periodically throughout the day and are cumulative counts for this document. Counts are subject to sampling, reprocessing and revision (up or down) throughout the day.
Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

EPA is required under the Toxic Substances Control Act (TSCA), as amended by the Frank R. Lautenberg Chemical Safety for the 21st Century Act, to make information publicly available and to publish information in the Federal Register pertaining to submissions under TSCA, including notice of receipt of a Premanufacture notice (PMN), Significant New Use Notice (SNUN) or Microbial Commercial Activity Notice (MCAN), including an amended notice or test information; an exemption application (Biotech exemption); an application for a test marketing exemption (TME), both pending and/or concluded; a notice of commencement (NOC) of manufacture (including import) for new chemical substances; and a periodic status report on new chemical substances that are currently under EPA review or have recently concluded review. This document covers the period from 05/01/2021 to 05/31/2021.

DATES:

Comments identified by the specific case number provided in this document must be received on or before July 15, 2021.

ADDRESSES:

Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2021-0068, and the specific case number for the chemical substance related to your comment, using the Federal eRulemaking Portal at http://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute.

Due to the public health concerns related to COVID-19, the EPA Docket Center (EPA/DC) and Reading Room is closed to visitors with limited exceptions. The staff continues to provide remote customer service via email, phone, and webform. For the latest status information on EPA/DC services and docket access, visit http://www.epa.gov/​dockets.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

For technical information contact: Jim Rahai, Project Management and Operations Division (MC 7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number: (202) 564-8593; email address: rahai.jim@epa.gov.

For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: TSCA-Hotline@epa.gov.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

I. Executive Summary

A. What action is the Agency taking?

This document provides the receipt and status reports for the period from 05/01/2021 to 05/31/2021. The Agency is providing notice of receipt of PMNs, SNUNs and MCANs (including amended notices and test information); an exemption application under 40 CFR part 725 (Biotech exemption); TMEs, both pending and/or concluded; NOCs to manufacture a new chemical substance; and a periodic status report on new chemical substances that are currently under EPA review or have recently concluded review.

EPA is also providing information on its website about cases reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN and exemption notices received, the date of receipt, the final EPA determination on the notice, and the effective date of EPA's determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/​reviewing-new-chemicals-under-toxic-substances-control-act-tsca/​status-pre-manufacture-notices. This information is updated on a weekly basis.

B. What is the Agency's authority for taking this action?

Under the Toxic Substances Control Act (TSCA), 15 U.S.C. 2601 et seq., a chemical substance may be either an Start Printed Page 31711“existing” chemical substance or a “new” chemical substance. Any chemical substance that is not on EPA's TSCA Inventory of Chemical Substances (TSCA Inventory) is classified as a “new chemical substance,” while a chemical substance that is listed on the TSCA Inventory is classified as an “existing chemical substance.” (See TSCA section 3(11).) For more information about the TSCA Inventory please go to: https://www.epa.gov/​tsca-inventory.

Any person who intends to manufacture (including import) a new chemical substance for a non-exempt commercial purpose, or to manufacture or process a chemical substance in a non-exempt manner for a use that EPA has determined is a significant new use, is required by TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate, before initiating the activity. EPA will review the notice, make a risk determination on the chemical substance or significant new use, and take appropriate action as described in TSCA section 5(a)(3).

TSCA section 5(h)(1) authorizes EPA to allow persons, upon application and under appropriate restrictions, to manufacture or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a)(2), for “test marketing” purposes, upon a showing that the manufacture, processing, distribution in commerce, use, and disposal of the chemical will not present an unreasonable risk of injury to health or the environment. This is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/​oppt/​newchems.

Under TSCA sections 5 and 8 and EPA regulations, EPA is required to publish in the Federal Register certain information, including notice of receipt of a PMN/SNUN/MCAN (including amended notices and test information); an exemption application under 40 CFR part 725 (biotech exemption); an application for a TME, both pending and concluded; NOCs to manufacture a new chemical substance; and a periodic status report on the new chemical substances that are currently under EPA review or have recently concluded review.

C. Does this action apply to me?

This action provides information that is directed to the public in general.

D. Does this action have any incremental economic impacts or paperwork burdens?

No.

E. What should I consider as I prepare my comments for EPA?

1. Submitting confidential business information (CBI). Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at http://www.epa.gov/​dockets/​comments.html.

II. Status Reports

In the past, EPA has published individual notices reflecting the status of TSCA section 5 filings received, pending or concluded. In 1995, the Agency modified its approach and streamlined the information published in the Federal Register after providing notice of such changes to the public and an opportunity to comment (See the Federal Register of May 12, 1995, (60 FR 25798) (FRL-4942-7). Since the passage of the Lautenberg amendments to TSCA in 2016, public interest in information on the status of section 5 cases under EPA review and, in particular, the final determination of such cases, has increased. In an effort to be responsive to the regulated community, the users of this information, and the general public, to comply with the requirements of TSCA, to conserve EPA resources and to streamline the process and make it more timely, EPA is providing information on its website about cases reviewed under the amended TSCA, including the TSCA section 5 PMN/SNUN/MCAN and exemption notices received, the date of receipt, the final EPA determination on the notice, and the effective date of EPA's determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/​reviewing-new-chemicals-under-toxic-substances-control-act-tsca/​status-pre-manufacture-notices. This information is updated on a weekly basis.

III. Receipt Reports

For the PMN/SNUN/MCANs that have passed an initial screening by EPA during this period, Table I provides the following information (to the extent that such information is not subject to a CBI claim) on the notices screened by EPA during this period: The EPA case number assigned to the notice that indicates whether the submission is an initial submission, or an amendment, a notation of which version was received, the date the notice was received by EPA, the submitting manufacturer (i.e., domestic producer or importer), the potential uses identified by the manufacturer in the notice, and the chemical substance identity.

As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that this information in the table is generic information because the specific information provided by the submitter was claimed as CBI. Submissions which are initial submissions will not have a letter following the case number. Submissions which are amendments to previous submissions will have a case number followed by the letter “A” (e.g., P-18-1234A). The version column designates submissions in sequence as “1”, “2”, “3”, etc. Note that in some cases, an initial submission is not numbered as version 1; this is because earlier version(s) were rejected as incomplete or invalid submissions. Note also that future versions of the following tables may adjust slightly as the Agency works to automate population of the data in the tables.

Table I—PMN/SNUN/MCANs Approved * From 05/01/2021 to 05/31/2021

Case No.VersionReceived dateManufacturerUseChemical substance
J-21-0012A205/11/2021Vestaron Corporation(G) Production of an agricultural product(G) Yeast that has been stably modified for the production of an agricultural product.
J-21-0014104/19/2021CBI(G) Chemical production(G) Chromosomally-modified Saccharomyces cerevisiae.
Start Printed Page 31712
J-21-0015104/19/2021CBI(G) Chemical production(G) Chromosomally-modified Saccharomyces cerevisiae.
J-21-0016104/19/2021CBI(G) Chemical production(G) Chromosomally-modified Saccharomyces cerevisiae.
J-21-0017104/19/2021CBI(G) Chemical production(G) Chromosomally-modified Saccharomyces cerevisiae.
J-21-0018104/19/2021CBI(G) Chemical production(G) Chromosomally-modified Saccharomyces cerevisiae.
J-21-0019104/22/2021CBI(G) Production of DNA for use in internal manufacturing(G) Strain of Escherichia coli modified with genetically-stable, plasmid-borne DNA for the production of plasmid-borne DNA.
P-18-0293A1105/03/2021Sirrus, Inc(S) Intermediate: Monomer used as a chemical, in the manufacture of polymers. (G) Coatings: Monomer used in the manufacture of industrial coatings (e.g., protective floor coatings) Adhesives: Monomer used in the manufacture (formulation) of adhesives (e.g., reactive, industrial structural adhesives or lamination)(S) Propanedioic acid, 2-methylene-, 1,3-dihexyl ester.
P-18-0293A1205/11/2021Sirrus, Inc(G) Adhesives: Monomer used in the manufacture (formulation) of adhesives (e.g., reactive, industrial structural adhesives or lamination). Coatings: Monomer used in the manufacture of industrial coatings, is not used in spray applications. (S) Intermediate: Monomer used as a chemical intermediate in the manufacture of polymers(S) Propanedioic acid, 2-methylene-, 1,3-dihexyl ester.
P-18-0294A1105/03/2021Sirrus, Inc(S) Intermediate: Monomer used as a chemical, in the manufacture of polymers. (G) Coatings: Monomer used in the manufacture of industrial coatings (e.g., protective floor coatings) Adhesives: Monomer used in the manufacture (formulation) of adhesives (e.g., reactive, industrial structural adhesives or lamination)(S) Propanedioic acid, 2-methylene-, 1,3-dicyclohexyl ester.
P-18-0294A1205/11/2021Sirrus, Inc(S) Intermediate: Monomer used as a chemical, in the manufacture of polymers. (G) Coatings: Monomer used in the manufacture of industrial coatings (e.g., protective floor coatings) Adhesives: Monomer used in the manufacture (formulation) of adhesives (e.g., reactive, industrial structural adhesives or lamination)(S) Propanedioic acid, 2-methylene-, 1,3-dicyclohexyl ester.
P-19-0098A405/05/2021Clariant Corporation(S) Flame retardant additive for intumescent coatings(G) Phosphoric acid, polymer with (hydroxyalkyl)-alkanediol and alkanediol.
P-20-0044A405/24/2021Angus Chemical Company(G) Curing additive: automotive paint; additive for industrial polyurethane dispersions; solubilizer for high acid value styrene acrylic polymers for use in ink applications; neutralization, solubilization and stability in commercial waterborne and solvent borne coatings and varnishes used for wood, metal, compositites and other substrates(S) 1-Propanamine, 3-methoxy-N,N-dimethyl.
P-20-0051A505/09/2021CBI(S) Curing agent for Industrial epoxy coating systems(S) 1,8-Octanediamine, 4-(aminomethyl)-, N-benzyl derivs.
P-20-0148A805/03/2021Solugen Inc(G) Additive for consumer, industrial, and commercial uses(G) Hydroxyalkanoic acid, salt, oxidized.
P-20-0149A805/03/2021Solugen Inc(G) Additive for consumer, industrial, and commercial uses(G) Hydroxyalkanoic acid, salt, oxidized.
P-20-0150A805/03/2021Solugen Inc(G) Additive for consumer, industrial, and commercial uses(G) Hydroxyalkanoic acid, salt, oxidized.
P-20-0151A805/03/2021Solugen Inc(G) Additive for consumer, industrial, and commercial uses(G) Hydroxyalkanoic acid, salt, oxidized.
P-20-0175A405/24/2021CBI(G) Proprietary Additive for WB&P Formulation, (G)Additive for Slats & CR Formulation (G)Additive for PI Formulation(G) acid N-[4-(4-diarylalkyl]-, carbopolycyclic alkenyl, methyl ester.
P-20-0176A405/24/2021CBI(G) Proprietary Additive for WB&P Formulation, (G)Additive for Slats & CR Formulation (G)Additive for PI Formulation(G) acid N-(diarylalkyl)-, carbopolycyclic alkenyl, methyl ester.
P-20-0177A405/24/2021CBI(G) Proprietary Additive for WB&P Formulation, (G)Additive for Slats & CR Formulation (G)Additive for PI Formulation(G) carbopolycyclic alkenyl, 2-carboxylic acid, 2-[[[4-(4-diarylalkyl)]carbonyl]oxy]ethyl ester.
P-20-0178A405/24/2021CBI(G) Proprietary Additive for WB&P Formulation, (G)Additive for Slats & CR Formulation (G)Additive for PI Formulation(G) carbopolycyclic alkenyl, 2-carboxylic acid, 2-[[[(diarylalkyl)]carbonyl]oxy]ethyl ester.
Start Printed Page 31713
P-21-0009405/11/2021Crison, LLC(S) Mining collector,(S) Asphalt emuslifier(S) Poly[oxy(methyl-1,2-ethanediyl)], alpha-(3-aminopropyl)-omega-(1-methylethoxy)-;(S) Poly[oxy(methyl-1,2-ethanediyl)], alpha-(3-aminopropyl)-omega-butoxy-;.
P-21-0015A305/12/2021Designer Molecules, Inc(S) As a raw material in a Temporary Bonding Adhesive formulation(S) Amines, C36-alkylenedi-, polymers with 5,5′-[(1-methylethylidene)bis(4,1-phenyleneoxy)]bis[1,3-isobenzofurandione] and 4,4′-[2,2,2-trifluoro-1-(trifluoromethyl)ethylidene]bis[2-aminophenol].
P-21-0071405/11/2021Crison, LLC(S) Mining Collector for sulfide ores(S) Poly[oxy(methyl-1,2-ethandiyl)], alpha-(dithiocarboxy)-omega-(1-methoxy)-, sodium salt.
P-21-0071A505/17/2021Crison, LLC(S) Mining Collector for sulfide ores(S) Poly[oxy(methyl-1,2-ethandiyl)], alpha-(dithiocarboxy)-omega-(1-methylethoxy)-, sodium salt (1:1).
P-21-0071A605/17/2021Crison, LLC(S) Mining Collector for sulfide ores(S) Poly[oxy(methyl-1,2-ethandiyl)], alpha-(dithiocarboxy)-omega-(1-methylethoxy)-, sodium salt (1:1).
P-21-0072405/11/2021Crison, LLC(S) Sulfide ore collector in mining(S) Poly[oxy(methyl-1,2-ethandiyl)], alpha-(dithiocarboxy)-omega-butoxy-, sodium salt.
P-21-0072A505/17/2021Crison, LLC(S) Sulfide ore collector in mining(S) Poly[oxy(methyl-1,2-ethandiyl)], alpha-(dithiocarboxy)-omega-butoxy-, sodium salt.
P-21-0072A605/17/2021Crison, LLC(S) Sulfide ore collector in mining(S) Poly[oxy(methyl-1,2-ethandiyl)], alpha-(dithiocarboxy)-omega-butoxy-, sodium salt.
P-21-0096405/17/2021CBI(G) Component in thermoset composites(G) Phenol, 4,4′-(1-methylethylidene)bis-, polymer with 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis[heteromonocycle], bis(2-methyl-2-propenoate).
P-21-0099305/06/2021Everlight USA, Inc(S) Reactive dye is designed for dyeing formulation of textile materials and dyeing on cellulose fiber(G) Aromaticsulfonic acid, 2,2′-[(2,4-diamino-1,3-aromatic)bis(2,1-diazenediyl)]bis[5-[[2-(sulfooxy)alkyl]sulfonyl]-, alkali metal;(G) Aromaticsulfonic acid, 2,2′-[(4,6-diamino-1,3-aromatic)bis(2,1-diazenediyl)]bis[5-[[2-(sulfooxy)alkyl]sulfonyl]-, alkali metal;.
P-21-0103305/06/2021CBI(S) Developer for thermal paper and film(S) Urea, N-[3-[[(4-methylphenyl)sulfonyl]oxy]phenyl]-N′-phenyl-.
P-21-0104A405/05/2021CBI(G) lubricant(G) Alkanedioic acid, di branched alkyl esters.
P-21-0104A505/14/2021CBI(G) lubricant(G) Alkanedioic acid, di branched alkyl esters.
P-21-0105A405/05/2021CBI(G) lubricant(G) Alkanedioic acid, di C11-14 isoalkyl esters.
P-21-0105A505/14/2021CBI(G) lubricant(G) Alkanedioic acid, di C11-14 isoalkyl esters.
P-21-0109A305/12/2021Chevron EL Segundo Refinery(G) Component in fuels(G) Hydrocarbons linear and branched, light alkylate.
P-21-0109A405/18/2021Chevron EL Segundo Refinery(G) Component in fuels(G) Hydrocarbons linear and branched, light alkylate.
P-21-0110A305/12/2021Chevron EL Segundo Refinery(G) Component in fuels(G) Hydrocarbons linear and branched, light catalytic cracked.
P-21-0110A405/18/2021Chevron EL Segundo Refinery(G) Component in fuels(G) Hydrocarbons linear and branched, light catalytic cracked.
P-21-0111A305/12/2021Chevron EL Segundo Refinery(G) Component in fuels(G) Hydrocarbons linear and branched, heavy catalytic cracked.
P-21-0111A405/18/2021Chevron EL Segundo Refinery(G) Component in fuels(G) Hydrocarbons linear and branched, heavy catalytic cracked.
P-21-0112A305/12/2021Chevron EL Segundo Refinery(G) Component in fuels(G) Hydrocarbons linear and branched, light hydrocracked.
P-21-0112A405/18/2021Chevron EL Segundo Refinery(G) Component in fuels(G) Hydrocarbons linear and branched, light hydrocracked.
P-21-0113A305/12/2021Chevron EL Segundo Refinery(G) Component in fuels(G) Hydrocarbons linear and branched, isomerization.
P-21-0113A405/18/2021Chevron EL Segundo Refinery(G) Component in fuels(G) Hydrocarbons linear and branched, isomerization.
P-21-0114A305/12/2021Chevron EL Segundo Refinery(G) Component in fuels(G) Hydrocarbons linear and branched, heavy catalytic reformed.
P-21-0114A405/18/2021Chevron EL Segundo Refinery(G) Component in fuels(G) Hydrocarbons linear and branched, heavy catalytic reformed.
P-21-0116A305/18/2021Chevron EL Segundo Refinery(G) Component in fuels(G) Hydrocarbons linear and branched, hydrotreated light.
P-21-0117A305/18/2021Chevron EL Segundo Refinery(G) Component in fuels(G) Hydrocarbons linear and branched, hydrotreated light paraffinic.
P-21-0118A305/18/2021Chevron EL Segundo Refinery(S) Chemical Intermediate(G) Hydrocarbons linear and branched, light catalytic cracked.
P-21-0119A305/18/2021Chevron EL Segundo Refinery(S) Chemical intermediate(G) Hydrocarbons linear and branched, heavy hydrocracked.
Start Printed Page 31714
P-21-0120205/05/2021Allnex USA Inc(S) Pigment dispersant for pigment concentrates and direct resin grind applications(G) 2-Alkenoic acid, 2-alkyl-, 2-hydroxyalkyl ester, homopolymer, ester with N-[3-[(carboxyamino)alkyl]-3,5,5-trialkylcycloalkyl]carbamic acid mono [2-(2-alkoxyethoxy)alkyl] ester, N-[3-[(carboxyamino)alkyl]-3,5,5-trialkylcycloalkyl] carbamic acid mono [2-(dialkylamino) alkyl] ester and 2-oxepanone polymer with tetrahydro-2H-pyran-2-one 2-alkylhexyl ester N-[3-(carboxyamino)alkyl phenyl] carbamate, 1,1-dialkylpropyl 2-alkylhexaneperoxoate—initiated.
P-21-0121205/05/2021Chevron EL Segundo Refinery(G) Component in fuels(G) Hydrocarbons linear and branched, heavy catalytic cracked.
P-21-0121A305/18/2021Chevron EL Segundo Refinery(G) Component in fuels(G) Hydrocarbons linear and branched, heavy catalytic cracked.
P-21-0122A205/18/2021Chevron EL Segundo Refinery(S) Chemical Intermediate(G) Hydrocarbons linear and branched, heavy hydrocracked.
P-21-0123A205/18/2021Chevron EL Segundo Refinery(G) Component in fuels(G) Hydrocarbons linear and branched, light hydrocracked.
P-21-0125205/05/2021Shin-Etsu Microsi(G) Contained use for microlithography for electronic device manufacturing(S) Nonane, branched.
P-21-0126104/30/2021Allnex USA Inc(S) Substance is incorporated as a component in several allnex coating resin products that are only applied by Cathodic Electrodeposition (CED) and used as additives for corrosion protection(G) Substituted heteromonocycle, polymer with haloalkyl substituted heteromonocycle, dialkyl-alkanediamine, (alkylalkylidene)bis[hydroxy-carbomonocycle] and oxybis[alkanol], reaction products with metal oxide and dialkanolamine.
P-21-0128205/10/2021Zschimmer&Schwarz(S) Material will be marketed and sold as a base lubricant for 2 stroke engine oils, 4 stroke engine oils, hydraulic fluids, automotive gear oils and transmission fluid formulations(S) Fatty acids, C8-18 and C18-unsatd., mixed esters with C18-unsatd. fatty acid dimers, decanoic acid, octanoic acid and trimethylolpropane.
P-21-0129105/04/2021CBI(G) Complexing agent(G) Alkyl glycine dicarboxylic acid sodium salt.
P-21-0130105/04/2021CBI(G) Photolithography(G) Sulfonium, tricarbocyclic-, 2-[3,5-bis(haloalkyl)phenyl]-alpha, alpha, beta, beta-polyhalopolyhydro-2-alkyl-4,7-alkano-1,3-heteropolycyclic-5-alkanesulfonate (1:1).
P-21-0131105/10/2021CBI(G) Photolithography(G) Sulfonium, tricarbocyclic-, 2-(4-alkoxyhalocarbomonocyclic)-alpha, alpha, beta, beta-polyhalopolyhydro-4,7-methano-1,3-heteropolycyclic-5-alkanesulfonate (1:1).
P-21-0134105/19/2021CBI(S) Photo initiator for adhesives,(S) photo initiator(S) Methanone, 1,1′-(diethylgermylene)bis[1-(4-methoxyphenyl)-.
P-21-0135105/20/2021Allnex USA Inc(S) Substance is a polymer in a coating additive for anti-scratch resistance(G) Alkenoic acid, allyl-, (dialkylamino)alkyl ester, polymer with dialkyl-alkylene-alkanediyl)bis[carbomoncycle], alkylalkyl alkyl-alkenoate and alkanediol mono(2-alkyl-alkenoate), diazenediyl)bis[2-alkylalkanenitrile]-initiated.
P-21-0136205/25/2021Allnex USA Inc(S) Coating additive for scratch resistance(G) Silica, alkoxy-modified.
SN-21-0007105/11/2021Evonik Corporation(S) Absorption Agent,(S) Laboratory Reagent(S) 1,3-Propanediamine, N1,N1-dimethyl-N3-(2,2,6,6-tetramethyl-4-piperidinyl)-.
SN-21-0008205/25/2021CBI(G) Refrigerant(S) 2-Butene, 1,1,1,4,4,4-hexafluoro-, (2Z)-.
SN-21-0009205/25/2021CBI(G) Refrigerant(S) 2-Butene, 1,1,1,4,4,4-hexafluoro-, (2E)-.
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the submission prior to the start of the 90 day review period, and in no way reflects the final status of a complete submission review.

In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the NOCs that have passed an initial screening by EPA during this period: The EPA case number assigned to the NOC including whether the submission was an initial or amended submission, the date the NOC was received by EPA, the date of commencement provided by the submitter in the NOC, a notation of the type of amendment (e.g., amendment to generic name, specific name, technical contact information, etc.) and chemical substance identity.

Table II—NOCs Approved * From 05/01/2021 to 05/31/2021

Case No.Received dateCommencement dateIf Amendment, type of amendmentChemical substance
J-21-000305/13/202104/16/2021N(G) Genetically modified saccharomyces cerevisiae.
J-21-000505/11/202104/30/2021N(G) Modified saccharomyces cerevisiae.
P-17-036005/05/202102/01/2021N(S) 2-propanol, 1-amino-,compd. with .alpha.-sulfo-.omega.-(decyloxy)poly(oxy-1,2-ethanediyl)(1:1).
Start Printed Page 31715
P-17-0360A05/05/202102/01/2021Multiple CASRN submitted on single NOC(S) 2-propanol, 1-amino-,compd. with.alpha.-sulfo-.omega.-(octyloxy)poly(oxy-1,2-ethanediyl)(1:1).
P-18-004105/07/202103/09/2021N(S) 2,5-furandione, polymer with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol, 3a,4,5,6,7,7a-hexahydro-4,7-methano-1h-inden-5(or 6)-yl ester, ester with 2,3-dihydroxypropyl neodecanoate.
P-18-033405/20/202104/22/2021N(S) Propanedioic acid, 1,3-dihexyl ester.
P-18-033505/20/202104/22/2021N(S) Propanedioic acid, 1,3-dicyclohexyl ester.
P-18-033605/25/202105/11/2021N(S) Propanedioic acid, 2,2-bis(hydroxymethyl)-, 1,3-dihexyl ester.
P-18-035105/10/202105/04/2021N(G) Acrylic acid, tricyclo alkyl ester.
P-20-003605/18/202105/14/2021N(S) Carbonic acid, di(lithium-6li) salt.
P-20-015904/30/202104/06/2021N(G) Phenoxathiinium, 10-phenyl, 5-alkyl-2-alkyl-4-(2,4,6-substituted tri-carbomonocycle, hetero-acid)benzenesulfonate (1:1).
P-21-001804/30/202104/06/2021N(G) Sulfonium, triphenyl-, heterocyclic compound-carboxylate (1:1).
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the submission.

In Table III of this unit, EPA provides the following information (to the extent such information is not subject to a CBI claim) on the test information that has been received during this time period: The EPA case number assigned to the test information; the date the test information was received by EPA, the type of test information submitted, and chemical substance identity.

Table III—Test Information Received From 05/01/2021 to 05/31/2021

Case No.Received dateType of test informationChemical substance
P-16-028905/26/2021Particle Size Analysis(G) Semi-aromatic polyamide.
P-16-046205/10/2021Quarter 1 Metals Report(G) Silane-treated aluminosilicate.
P-16-054305/12/2021Exposure Monitoring Report(G) Halogenophosphoric acid metal salt.
P-18-016005/20/202114-Day Range-Finding Study and Combined Repeated Dose Toxicity Study with Reproductive-Developmental Toxicity Test(G) Heteropolycyclic, halo substituted alkyl substituted- diaromatic amino substituted carbomonocycle, halo substituted alkyl substituted heteropolycyclic, tetraaromatic metalloid salt (1:1).
P-20-004405/26/2021Freshwater Algal Growth Inhibition Test (OECD Test Guideline 201)(S) 1-propanamine, 3-methoxy-n,n-dimethyl.
P-20-007305/11/2021Ready Biodegradability Manometric Respirometry Tests (OECD Test Guideline 301F), Assessment of Aerobic Degradability in Seawater, Assessment of the 10 day LC50 Toxicity to the Marine Crustacean Corophium Volutator (OSPARCOM Part A Method), Assessment of the Toxicity to the Marine fish Cyprinodon Variegatus (OSPAR Limit Test), Assessment of the 72 Hour EC(r)50 toxicity to the Marine Unicellular Algae Skeletonema sp., and Manufacture Process Description(G) 2,5-furandione, reaction products with alkylamine, 1-octanol and polyethylene glycol alkoxy-ether, acetates (salts).

If you are interested in information that is not included in these tables, you may contact EPA's technical information contact or general information contact as described under FOR FURTHER INFORMATION CONTACT to access additional non-CBI information that may be available.

Start Authority

Authority: 15 U.S.C. 2601 et seq.

End Authority Start Signature

Dated: June 9, 2021.

Pamela Myrick,

Director, Project Management and Operations Division, Office of Pollution Prevention and Toxics.

End Signature End Supplemental Information

[FR Doc. 2021-12504 Filed 6-14-21; 8:45 am]

BILLING CODE 6560-50-P