This site displays a prototype of a “Web 2.0” version of the daily
Federal Register. It is not an official legal edition of the Federal
Register, and does not replace the official print version or the official
electronic version on GPO’s govinfo.gov.
The documents posted on this site are XML renditions of published Federal
Register documents. Each document posted on the site includes a link to the
corresponding official PDF file on govinfo.gov. This prototype edition of the
daily Federal Register on FederalRegister.gov will remain an unofficial
informational resource until the Administrative Committee of the Federal
Register (ACFR) issues a regulation granting it official legal status.
For complete information about, and access to, our official publications
and services, go to
About the Federal Register
on NARA's archives.gov.
The OFR/GPO partnership is committed to presenting accurate and reliable
regulatory information on FederalRegister.gov with the objective of
establishing the XML-based Federal Register as an ACFR-sanctioned
publication in the future. While every effort has been made to ensure that
the material on FederalRegister.gov is accurately displayed, consistent with
the official SGML-based PDF version on govinfo.gov, those relying on it for
legal research should verify their results against an official edition of
the Federal Register. Until the ACFR grants it official status, the XML
rendition of the daily Federal Register on FederalRegister.gov does not
provide legal notice to the public or judicial notice to the courts.
Rule
Enter a search term or FR citation e.g.
88 FR 38230 FR 78782024-13208USDA09/05/24RULE0503-AA39SORN
Choosing an item from
full text search results
will bring you to those results. Pressing enter in the search box
will also bring you to search results.
Choosing an item from
suggestions
will bring you directly to the content.
This table of contents is a navigational tool, processed from the
headings within the legal text of Federal Register documents.
This repetition of headings to form internal navigation links
has no substantive legal effect.
Document page views are updated periodically throughout the day and are
cumulative counts for this document. Counts are subject to sampling,
reprocessing and revision (up or down) throughout the day.
Page views
290
as of
11/08/2026 at 4:15 am EST
Other Formats
Enhanced Content - Other Formats
This document is also available in the following formats:
This PDF is FR Doc. 2022-13378 as it appeared on Public Inspection on
06/28/2022 at 8:45 am.
It was viewed
6
times while on Public Inspection.
If you are using public inspection listings for legal research, you
should verify the contents of the documents against a final, official
edition of the Federal Register. Only official editions of the
Federal Register provide legal notice of publication to the public and judicial notice
to the courts under 44 U.S.C. 1503 & 1507.
Learn more here.
Published Document: 2022-13378 (87 FR 38665)
This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.
AGENCY:
Environmental Protection Agency (EPA).
ACTION:
Final rule.
SUMMARY:
The Environmental Protection Agency (EPA) is taking final action to approve revisions to the San Diego Air Pollution Control District (SDAPCD or “District”) portion of the California State Implementation Plan (SIP). These revisions concern SDAPCD's negative declarations for certain Control Techniques Guidelines (CTGs) as they apply to the 2008 and 2015 ozone national ambient air quality standards (NAAQS or “standards”) reasonably available control technology (RACT) SIP. We are approving revisions that regulate these emission sources under the Clean Air Act (CAA or the Act). This approval stops all sanction and federal implementation plan clocks started by our December 3, 2020 partial approval and partial disapproval.
DATES:
This rule is effective June 29, 2022.
ADDRESSES:
The EPA has established a docket for this action under Docket ID No. EPA-R09-OAR-2022-0253. All documents in the docket are listed on the
https://www.regulations.gov
website. Although listed in the index, some information is not publicly available,
e.g.,
Confidential Business Information (CBI) or other information whose disclosure is restricted by statute.
( printed page 38666)
Certain other material, such as copyrighted material, is not placed on the internet and will be publicly available only in hard copy form. Publicly available docket materials are available through
https://www.regulations.gov,
or please contact the person identified in the
FOR FURTHER INFORMATION CONTACT
section for additional availability information. If you need assistance in a language other than English or if you are a person with disabilities who needs a reasonable accommodation at no cost to you, please contact the person identified in the
FOR FURTHER INFORMATION CONTACT
section.
FOR FURTHER INFORMATION CONTACT:
Sina Schwenk-Mueller, EPA Region IX, 75 Hawthorne St., San Francisco, CA 94105. By phone: (415) 947-4100 or by email at
SchwenkMueller.Sina@epa.gov.
SUPPLEMENTARY INFORMATION:
Throughout this document, “we,” “us” and “our” refer to the EPA.
Table of Contents
I. Proposed Action
II. Public Comments and EPA Responses
III. EPA Action
IV. Statutory and Executive Order Reviews
I. Proposed Action
On April 13, 2022 (87 FR 21822), the EPA proposed to approve the following rule into the California SIP.
Table 1—Submitted Document 1
Local agency
Document
Adopted
Submitted
SDAPCD
“2020 Reasonably Available Control Technology Demonstration for the National Ambient Air Quality Standards For Ozone in San Diego County, October 2020 (2020 RACT SIP)—Negative Declarations for the 2008 and 2015 NAAQS:
10/14/2020
12/29/2020
Control of Volatile Organic Emissions from Manufacture of Synthesized Pharmaceutical Products
(EPA-450/2-78-029)
Control Techniques Guidelines for Fiberglass Boat Manufacturing Materials
(EPA-453/R-08-004)
Control Techniques Guidelines for Miscellaneous Metal and Plastic Parts Coatings
(EPA-453/R-08-003); Table 3—Plastic Parts and Products, Table 4—Automotive/Transportation and Business Machine Plastic Parts, Table 5—Pleasure Craft Surface Coating, Table 6—Motor Vehicle Materials
We
proposed to approve these revisions because we determined that they comply with the relevant CAA requirements. Our proposed action contains more information on the rule and our evaluation.
II. Public Comments and EPA Responses
The EPA's proposed action provided a 30-day public comment period. During this period, we received one non-germane comment. Therefore, we are finalizing our action as proposed.
III. EPA Action
No comments were submitted that change our assessment of the rule as described in our proposed action. Therefore, as authorized in section 110(k)(3) of the Act, the EPA is fully approving the negative declarations into the California SIP. This approval stops all sanction and federal implementation plan clocks started by our December 3, 2020 partial approval and partial disapproval actions on the SDAPCD RACT SIP.
In accordance with 5 U.S.C. 553(d) of the Administrative Procedure Act (APA), the EPA finds there is good cause for this action to become effective immediately upon publication. The immediate effective date for this action is authorized under 5 U.S.C. 553(d)(1).
Section 553(d)(1) of the APA provides that final rules shall not become effective until 30 days after publication in the
Federal Register
“except . . . a substantive rule which grants or recognizes an exemption or relieves a restriction.” The purpose of this provision is to “give affected parties a reasonable time to adjust their behavior before the final rule takes effect.”
Omnipoint Corp.
v.
Fed. Commc'n Comm'n,
78 F.3d 620, 630 (DC Cir. 1996);
see also United States
v.
Gavrilovic,
551 F.2d 1099, 1104 (8th Cir. 1977) (quoting legislative history). However, when the agency grants or recognizes an exemption or relieves a restriction, affected parties do not need a reasonable time to adjust because the effect is not adverse. The EPA has determined that this rule relieves a restriction because this rule terminates the sanctions and federal implementation plan clocks started by our December 3, 2020 partial approval and partial disapproval. Upon the effective date of this action, the sanctions and federal implementation plan clocks will stop. For this reason, the EPA finds good cause under 5 U.S.C. 553(d)(1) for this action to become effective on the date of publication of this action.
IV. Statutory and Executive Order Reviews
Under the Clean Air Act, the Administrator is required to approve a SIP submission that complies with the provisions of the Act and applicable federal regulations. 42 U.S.C. 7410(k); 40 CFR 52.02(a). Thus, in reviewing SIP submissions, the EPA's role is to approve state choices, provided that they meet the criteria of the Clean Air Act. Accordingly, this action merely approves state law as meeting federal requirements and does not impose additional requirements beyond those imposed by state law. For that reason, this action:
Is not a significant regulatory action subject to review by the Office of Management and Budget under Executive Orders 12866 (58 FR 51735, October 4, 1993) and 13563 (76 FR 3821, January 21, 2011);
Does not impose an information collection burden under the provisions of the Paperwork Reduction Act (44 U.S.C. 3501et seq.);
Is certified as not having a significant economic impact on a substantial number of small entities under the Regulatory Flexibility Act (5 U.S.C. 601et seq.);
Does not contain any unfunded mandate or significantly or uniquely affect small governments, as described in the Unfunded Mandates Reform Act of 1995 (Pub. L. 104-4);
Does not have federalism implications as specified in Executive
( printed page 38667)
Order 13132 (64 FR 43255, August 10, 1999);
Is not an economically significant regulatory action based on health or safety risks subject toExecutive Order 13045 (62 FR 19885, April 23, 1997);
Is not subject to requirements of Section 12(d) of the National Technology Transfer and Advancement Act of 1995 (15 U.S.C. 272 note) because application of those requirements would be inconsistent with the Clean Air Act; and
Does not provide the EPA with the discretionary authority to address, as appropriate, disproportionate human health or environmental effects, using practicable and legally permissible methods, underExecutive Order 12898 (59 FR 7629, February 16, 1994).
In addition, the SIP is not approved to apply on any Indian reservation land or in any other area where the EPA or an Indian tribe has demonstrated that a tribe has jurisdiction. In those areas of Indian country, the rule does not have tribal implications and will not impose substantial direct costs on tribal governments or preempt tribal law as specified by Executive Order 13175 (65 FR 67249, November 9, 2000).
The Congressional Review Act, 5 U.S.C. 801et seq.,
as added by the Small Business Regulatory Enforcement Fairness Act of 1996, generally provides that before a rule may take effect, the agency promulgating the rule must submit a rule report, which includes a copy of the rule, to each House of the Congress and to the Comptroller General of the United States. The EPA will submit a report containing this action and other required information to the U.S. Senate, the U.S. House of Representatives, and the Comptroller General of the United States prior to publication of the rule in the
Federal Register
. A major rule cannot take effect until 60 days after it is published in the
Federal Register
. This action is not a “major rule” as defined by 5 U.S.C. 804(2).
(584) The following plan was submitted on December 29, 2020, by the Governor's designee as an attachment to a letter dated December 28, 2020.
(i) [Reserved]
(ii)
Additional materials.
(A) San Diego County Air Pollution Control District.
(
1) Negative Declaration for “Control of Volatile Organic Emissions from Manufacture of Synthesized Pharmaceutical Products,” EPA-450/2-78-029, December 1978, as submitted in the 2020 Reasonably Available Control Technology Demonstration for the National Ambient Air Quality Standards for Ozone in San Diego County, adopted on October 14, 2020.
(
2) Negative Declaration for “Control Techniques Guidelines for Miscellaneous Metal and Plastic Parts Coatings,” EPA-453/R-08-003, September 2008 (Tables 3-6), as submitted in the 2020 Reasonably Available Control Technology Demonstration for the National Ambient Air Quality Standards for Ozone in San Diego County, adopted on October 14, 2020.
(
3) Negative Declaration for “Control Techniques Guidelines for Fiberglass Boat Manufacturing Materials,” EPA-453/R-08-004, September 2008, as submitted in the 2020 Reasonably Available Control Technology Demonstration for the National Ambient Air Quality Standards for Ozone in San Diego County, adopted on October 14, 2020.
(B) [Reserved]
3. Section 52.222 is amended by revising paragraph (a)(5)(ii) and adding paragraph (a)(5)(iii) to read as follows:
Control of Volatile Organic Emissions from Existing Stationary Sources—Volume II: Surface Coating of Cans, Coils, Paper, Fabrics, Automobiles, and Light-Duty Trucks (Automobiles, and light-duty truck coatings only)
X
EPA-450/2-77-025
Control of Refinery Vacuum Producing Systems, Wastewater Separators, and Process Unit Turnarounds
EPA-450/2-77-032
Control of Volatile Organic Emissions from Existing Stationary Sources—Volume III: Surface Coating of Metal Furniture
X
EPA-450/2-77-033
Control of Volatile Organic Emissions from Existing Stationary Sources—Volume IV: Surface Coating of Insulation of Magnet Wire
X
EPA-450/2-77-034
Control of Volatile Organic Emissions from Existing Stationary Sources—Volume V: Surface Coating of Large Appliances
X
EPA-450/2-78-029
Control of Volatile Organic Emissions from Manufacture of Synthesized Pharmaceutical Products
X
( printed page 38668)
EPA-450/2-78-030
Control of Volatile Organic Emissions from Manufacture of Pneumatic Rubber Tires
X
EPA-450/2-78-032
Control of Volatile Organic Emissions from Existing Stationary Sources—Volume VII: Factory Surface Coating of Flat Wood Paneling
X
EPA-450/2-78-036
Control of Volatile Organic Compound Leaks from Petroleum Refinery Equipment
X
EPA-450/3-82-009
Control of Volatile Organic Compound Emissions from Large Petroleum Dry Cleaners
X
EPA-450/3-83-006
Control of Volatile Organic Compound Leaks from Synthetic Organic Chemical Polymer and Resin Manufacturing Equipment
X
EPA-450/3-83-007
Control of Volatile Organic Compound Equipment Leaks from Natural Gas/Gasoline Processing Plants
X
EPA-450/3-83-008
Control of Volatile Organic Compound Emissions from Manufacture of High-Density Polyethylene, Polypropylene, and Polystyrene Resins
X
EPA-450/3-84-015
Control of Volatile Organic Compound Emissions from Air Oxidation Processes in Synthetic Organic Chemical Manufacturing Industry
X
EPA-450/4-91-031
Control of Volatile Organic Compound Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical Manufacturing Industry
X
EPA-453/R-97-004
Control of Volatile Organic Compound Emissions from Coating Operations at Aerospace Manufacturing and Rework Operations
Aerospace MACT,
see theFederal Registerof 06/06/94
X
EPA-453/R-06-004
Control Techniques Guidelines for Flat Wood Paneling Coatings
X
EPA 453/R-07-004
Control Techniques Guidelines for Large Appliance Coatings
X
EPA 453/R-07-005
Control Techniques Guidelines for Metal Furniture Coatings
X
EPA-453/R-08-003
Control Techniques Guidelines for Miscellaneous Metal and Plastic Parts Coatings Tables 3-6
X
EPA-453/R-08-004
Control Techniques Guidelines for Fiberglass Boat Manufacturing Materials
X
EPA-453/R-08-006
Control Techniques Guidelines for Automobile and Light-Duty Truck Assembly Coatings
X
(iii) The following negative declarations for the 2015 ozone NAAQS were adopted by the San Diego County Air Pollution Control District.
Table 5 to Paragraph (
a
)(5)(iii)—Negative Declarations for the 2015 Ozone NAAQS
Control of Volatile Organic Emissions from Manufacture of Synthesized Pharmaceutical Products
X
EPA-453/R-08-003
Control Techniques Guidelines for Miscellaneous Metal and Plastic Parts Coatings Tables 3-6
X
EPA-453/R-08-004
Control Techniques Guidelines for Fiberglass Boat Manufacturing Materials.
X
4. Section 52.237 is amended by removing and reserving paragraphs (b)(2)(i)(C), (b)(2)(i)(E), and (b)(2)(i)(G).
Footnotes
1.
The EPA is only acting on the negative declarations for the Control Techniques Guidelines (CTGs) for Synthesized Pharmaceutical Products, Fiberglass Boat Manufacturing Materials, and Miscellaneous Metal and Plastic Products, Tables 3-6. The EPA will propose separate action on the remainder of the 2020 SDAPCD RACT SIP submittal at a future date.