Legal Status
This site displays a prototype of a “Web 2.0” version of the daily Federal Register. It is not an official legal edition of the Federal Register, and does not replace the official print version or the official electronic version on GPO’s govinfo.gov.
The documents posted on this site are XML renditions of published Federal Register documents. Each document posted on the site includes a link to the corresponding official PDF file on govinfo.gov. This prototype edition of the daily Federal Register on FederalRegister.gov will remain an unofficial informational resource until the Administrative Committee of the Federal Register (ACFR) issues a regulation granting it official legal status. For complete information about, and access to, our official publications and services, go to About the Federal Register on NARA's archives.gov.
The OFR/GPO partnership is committed to presenting accurate and reliable regulatory information on FederalRegister.gov with the objective of establishing the XML-based Federal Register as an ACFR-sanctioned publication in the future. While every effort has been made to ensure that the material on FederalRegister.gov is accurately displayed, consistent with the official SGML-based PDF version on govinfo.gov, those relying on it for legal research should verify their results against an official edition of the Federal Register. Until the ACFR grants it official status, the XML rendition of the daily Federal Register on FederalRegister.gov does not provide legal notice to the public or judicial notice to the courts.
- Documents
- Public Inspection
-
Publication Date
-
Section
-
Type
-
Cyflumetofen; Pesticide Tolerances
This regulation establishes tolerances for residues of cyflumetofen in or on multiple commodities which are identified and discussed later in this document. Interregional Research Project Number 4 (IR-4) requested these tolerances under the Federal Food, Drug, and Cosmetic Act (FFDCA).
-
High-Wage Components of the Labor Value Content Requirements Under the United States-Mexico-Canada Agreement Implementation Act
In accordance with section 210(b) of the United States-Mexico- Canada Agreement Implementation Act, the U.S. Department of Labor is issuing regulations necessary to administer the high-wage components of the labor value content requirements as set forth in section 202A of that Act.
-
Beef Promotion and Research; Reapportionment
This final rule adjusts representation on the Cattlemen's Beef Promotion and Research Board (Board), established under the Beef Promotion and Research Act of 1985 (Act), to reflect changes in domestic cattle inventories as well as changes in levels of imported cattle, beef, and beef products that have occurred since the Board was last...
-
Updated Disclosure Requirements and Summary Prospectus for Variable Annuity and Variable Life Insurance Contracts; Correction
This document makes technical corrections to amendments to disclosure requirements and summary prospectus for variable annuity and variable life insurance contracts adopted in Release No. 33-10765 (March 11, 2020), which was published in the Federal Register on May 1, 2020.
-
Unique Device Identification: Policy Regarding Compliance Dates for Class I and Unclassified Devices and Certain Devices Requiring Direct Marking; Immediately in Effect Guidance for Industry and Food and Drug Administration Staff; Availability
The Food and Drug Administration (FDA or Agency) is announcing the availability of a guidance entitled ``Unique Device Identification: Policy Regarding Compliance Dates for Class I and Unclassified Devices and Certain Devices Requiring Direct Marking; Immediately in Effect Guidance for Industry and Food and Drug Administration Staff.'' This...
-
Airworthiness Directives; The Boeing Company Airplanes
The FAA is correcting an airworthiness directive (AD) that published in the Federal Register. That AD applies to all The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747- 200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP series airplanes. As published, the AD number and Amendment number specified in the...
-
Amendment of Class E Airspace; Durango, CO
This action modifies Class E airspace, designated as a surface area, at Durango-La Plata County Airport, CO. This action also modifies the Class E airspace extending upward from 700 feet above the surface. Additionally, this action revokes the Class E airspace extending upward from 1,200 feet above the surface. Further, this action removes the...
-
Amendment of Class E Airspace and Establishment of Class E Airspace Extension; Port Angeles, WA
This action modifies the Class E surface area, Class E airspace extending upward from 700 feet above the surface and creates Class E airspace as an extension to the Class E surface area at William R Fairchild International Airport, Port Angeles, WA. Following a review of the airspace, the FAA found it necessary to modify the existing airspace...
-
Establishment of Class E Airspace; Port Angeles, WA; Port Angeles, WA
This action establishes a Class E surface area, Class E airspace as an extension to the surface area and Class E airspace extending upward from 700 feet above the surface at Port Angeles CGAS, Port Angeles, WA. Following a review of the airspace serving Port Angeles CGAS and William R Fairchild International Airport, the FAA found it necessary...
-
CARES Act Programs; Equitable Services to Students and Teachers in Non-Public Schools
The U.S. Department of Education (Department) issues this interim final rule to clarify the requirement in the Coronavirus Aid, Relief, and Economic Security Act (CARES Act) that local educational agencies (LEAs) provide equitable services to students and teachers in non-public schools under the Governor's Emergency Education Relief Fund (GEER...
-
Air Plan Approval; New Hampshire; Single Source Order for PSI Molded Plastics
The Environmental Protection Agency (EPA) is approving a State Implementation Plan (SIP) revision submitted by the State of New Hampshire. The revision consists of a single source Order that New Hampshire issued to PSI Molded Plastics defining reasonably available control technology (RACT) requirements for the facility. This action is being...
-
Margin and Capital Requirements for Covered Swap Entities
The OCC, Board, FDIC, FCA, and FHFA (each, an agency, and collectively, the agencies) are adopting a final rule that amends the agencies' regulations requiring swap dealers and security-based swap dealers under the agencies' respective jurisdictions to exchange margin with their counterparties for swaps that are not centrally cleared (Swap...
-
Margin and Capital Requirements for Covered Swap Entities
The OCC, Board, FDIC, FCA, and FHFA (each an Agency and, collectively, the Agencies) are adopting and inviting comment on an interim final rule amending the Agencies' regulations that require swap dealers, security-based swap dealers, major swap participants, and major security-based swap participants under the Agencies' respective jurisdictions...