Legal Status
This site displays a prototype of a “Web 2.0” version of the daily Federal Register. It is not an official legal edition of the Federal Register, and does not replace the official print version or the official electronic version on GPO’s govinfo.gov.
The documents posted on this site are XML renditions of published Federal Register documents. Each document posted on the site includes a link to the corresponding official PDF file on govinfo.gov. This prototype edition of the daily Federal Register on FederalRegister.gov will remain an unofficial informational resource until the Administrative Committee of the Federal Register (ACFR) issues a regulation granting it official legal status. For complete information about, and access to, our official publications and services, go to About the Federal Register on NARA's archives.gov.
The OFR/GPO partnership is committed to presenting accurate and reliable regulatory information on FederalRegister.gov with the objective of establishing the XML-based Federal Register as an ACFR-sanctioned publication in the future. While every effort has been made to ensure that the material on FederalRegister.gov is accurately displayed, consistent with the official SGML-based PDF version on govinfo.gov, those relying on it for legal research should verify their results against an official edition of the Federal Register. Until the ACFR grants it official status, the XML rendition of the daily Federal Register on FederalRegister.gov does not provide legal notice to the public or judicial notice to the courts.
- Documents
- Public Inspection
Type
- Proposed Rule 216
- Rule 209
Agency
- Transportation Department 313
- Federal Aviation Administration 311
- Environmental Protection Agency 105
- Consumer Product Safety Commission 3
- Energy Department 3
Section
-
Publication Date
-
Topic
-
Airworthiness Directives; The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2013-07- 09, which applied to certain The Boeing Company Model 737-700, -700C, - 800, and -900ER series airplanes, Model 747-400F series airplanes, and Model 767-200 and -300 series airplanes. AD 2013-07-09 required a general visual inspection for affected serial numbers of the crew oxygen mask...
-
Air Plan Approval; Nebraska; Revisions to Title 129 of the Nebraska Administrative Code; Chapter 39 Visible Emissions From Diesel-Powered Motor Vehicles
The Environmental Protection Agency (EPA) is proposing to approve revisions to the State Implementation Plan (SIP) submitted by the State of Nebraska on July 16, 2020. This proposed action will amend the SIP to revise title 129 of the Nebraska Administrative Code by removing a portion of the SIP that addresses visible emissions from...
-
Air Plan Approval; California; Mojave Desert Air Quality Management District
The Environmental Protection Agency (EPA) is proposing to approve a revision to the Mojave Desert Air Quality Management District (MDAQMD or ``District'') portion of the California State Implementation Plan (SIP). This revision concerns the regulation of emissions of volatile organic compounds (VOCs) from wood products coating operations. We are...
-
Air Plan Approval; California; Sacramento Metro Air Quality Management District
The Environmental Protection Agency (EPA) is proposing to approve a revision to the Sacramento Metropolitan Air Quality Management District (SMAQMD) portion of the California State Implementation Plan (SIP). This revision concerns emissions of oxides of nitrogen (NO<INF>X</INF>) from water heaters, boilers and process heaters. We are proposing...
-
Airworthiness Directives; The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2021-02- 19, which applied to certain The Boeing Company Model 787-8, -9, and - 10 airplanes. AD 2021-02-19 required repetitive general visual inspections for disengaged or damaged decompression panels of the bilge barriers located in the forward and aft cargo compartments, reinstallation of...
-
Airworthiness Directives; Textron Aviation Inc. Airplanes
The FAA is superseding Airworthiness Directive (AD) 97-06-10 for certain Raytheon Aircraft Company (type certificate now held by Textron Aviation Inc. (Textron)) Model 76 airplanes. AD 97-06-10 required repetitively inspecting the main landing gear (MLG) ``A'' frame assemblies for cracks and replacing any cracked assembly. Since the FAA issued...
-
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-900ER series airplanes. This AD was prompted by reports of significant corrosion of electrical connectors located in the main landing gear (MLG) wheel well. This AD requires repetitive records checks to determine exposure to certain deicing fluids or...
-
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC- 10-30F (KC-10A and KDC-10), DC-10-40 and DC-10-40F airplanes; and Model MD-10-10F and MD-10-30F airplanes. This AD was prompted by a report that an operator found a crack in the upper flange of the pylon aft...
-
Airworthiness Directives; MHI RJ Aviation ULC (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for all MHI RJ Aviation ULC Model CL-600-2C10 (Regional Jet Series 700, 701 & 702) airplanes; Model CL-600-2C11 (Regional Jet Series 550) airplanes; Model CL-600-2D15 (Regional Jet Series 705) airplanes; Model CL-600- 2D24 (Regional Jet Series 900) airplanes; and Model CL-600-2E25 (Regional...
-
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by a report that a welding quality issue has been identified in the gimbal joint of the air bleed duct located at each wing-to-pylon interface; the inner ring of a gimbal had deformed to an oval shape, which could...
-
Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain De Havilland Aircraft of Canada Limited Model DHC-8-102, - 103, and -106 airplanes; Model DHC-8-201 and -202 airplanes; Model DHC- 8-301, -311, and -315 airplanes; and Model DHC-8-400, -401, and -402 airplanes. This proposed AD was prompted by reports that mounting nuts...
-
Airworthiness Directives; MHI RJ Aviation ULC (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for MHI RJ Aviation ULC Model CL-600-2C10 (Regional Jet Series 700, 701 & 702), CL-600-2C11 (Regional Jet Series 550), CL-600-2D15 (Regional Jet Series 705), CL-600-2D24 (Regional Jet Series 900), and CL-600-2E25 (Regional Jet Series 1000) airplanes. This proposed AD was prompted by...
-
Airworthiness Directives; GE Aviation Czech s.r.o. (Type Certificate Previously Held by WALTER Engines a.s., Walter a.s., and MOTORLET a.s.) Turboprop Engines
The FAA proposes to adopt a new airworthiness directive (AD) for all GE Aviation Czech s.r.o. (GEAC) H75-200, H80-100, and H80-200 model turboprop engines. This proposed AD was prompted by several reports of engine gas generator speed (Ng) rollbacks occurring below idle on GEAC H75-200, H80-100, and H80-200 model turboprop engines. This proposed...
-
Proposed Establishment of Class E Airspace; Missoula, MT
This action proposes to establish Class E domestic en route airspace extending upward from 1,200 feet above the surface at Missoula, MT. This airspace would facilitate vectoring of Instrument Flight Rules (IFR) aircraft and would properly contain IFR aircraft operating on direct routes under the control of Salt Lake City Air Route Traffic...
-
Proposed Amendment and Revocation of Class E Airspace; Michigan, MI
This action proposes to amend the Class E airspace area extending upward from 1,200 feet above the surface over the State of Michigan and remove overlapping and redundant enroute domestic airspace areas within these boundaries. The FAA is proposing this action to correct, simplify, and close gaps in the Class E airspace extending upward from...
-
Airworthiness Directives; Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500- 1A11 airplanes. This AD was prompted by reports of the failure of emergency locator transmitter (ELT) antennas. This AD requires repetitive replacements of the ELT antenna and repetitive inspections for damage of the...
-
Amendment of Class E Airspace; Kremmling, CO
This action modifies the Class E airspace extending upward from 700 feet above the surface at Mc Elroy Airfield Airport, Kremmling, CO. Modification of this airspace is necessary to properly contain instrument flight rules (IFR) aircraft departing and arriving at the airport. Additionally, this action implements administrative updates to the...
-
Amendment of Class E Airspace; Meeker, CO
This action modifies the Class E airspace extending upward from 700 feet above the surface at Meeker Coulter Field Airport, Meeker, CO, by reducing the dimensions of the airspace area. Additionally, this action implements an administrative update to the airport's name.
-
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such...
-
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPS) and associated Takeoff Minimums and Obstacle Departure procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National...